-
1, Original Operation Manual 12-2014 Sweeper 689.04-40 Sweeper Operation Manual Models KM 70 G Type 02 KM Domus Type 02 KM 80 G Type 02 KM 100 G Type 02 Machine no.
…
-
2, Original Operation Manual Sweeper 689.04-40 - 2 Contents 1 Important Information .......................................................................................................................... 3 1.1 General .................................................................................................................................. 3 1.2 Symbols .................................................…
-
3, Original Operation Manual Sweeper 689.04-40 - 3 1 Important Information We are pleased that you have selected a machine from Cramer GmbH in Germany. Please read this Operation Manual before you use the machine for the first time and observe the notes and safety instructions. Imprint Cramer GmbH Reimersstr. 36 D-26789 Leer Phone: +49491/60950 Fax: +49491/6095200 [email protected] District court of Aurich HRB 110877 VAT ID: DE 814 …
-
4, Original Operation Manual Sweeper 689.04-40 - 4 2 Safety 2.1 Use in compliance with intended purpose The machine is approved as a sweeper for sweeping and collecting (with fitted sweepings container) leaves and waste. Any use exceeding this is considered not in compliance with the intended purpose. The manufacturer shall not be liable for damage resulting from use not in compliance with the intended purpose; the risk for this shall…
-
5, Cramer KM 70 G Type 02 Original Operation Manual Sweeper 689.04-40 - 5 2.6 Safety instructions The assembly and safety instructions must be read and observed prior to starting the machine. Risk by flinging parts with running motor. Keep a safety distance of 3 m. Keep sufficient distance to hot surfaces. 2.7 Required protection equipment • Rugged footwear • Close-fitting clothing • Ear protection • Safety gloves • Protection goggles 2.8 Safety devices • Do not remov…
-
6, Cramer KM 70 G Type 02 Original Operation Manual Sweeper 689.04-40 - 6 3.3 Operating elements for all models 1. Drive Lever on the right for operation drive Lever released: Machine is at standstill Lever activated: Machine moving 2. Brush drive lever Lever on the left for brush activation Lever released: Brush is at standstill: Lever activated: Brush turns 3. Brush height adjustment Turn handle to the required setting. Use …
-
7, Original Operation Manual Sweeper 689.04-40 - 7 3.4 Operating elements for KM Domus 4. Hand throttle for motor capacity Parking brake on support wheel Brake on: Push the lower lever down with your foot Brake off: Push the upper lever down with your foot 8. Release and tilt back steering bracket (for transport and stor…
-
8, Original Operation Manual Sweeper 689.04-40 - 8 3.6 Working position and areas of risk Working position: Behind the machine on the handles Areas of risk: • Catchment area of sweeping brushes • Ejection area of sweeping brushes 3.7 Accessories and spare parts Original parts Only original spare parts and original accessories may be used. 4 Delivery, transport, storage 4.1 Delivery Risk of high dead weight • The …
-
9, Cramer KM 70 G Type 02 Original Operation Manual Sweeper 689.04-40 - 9 6 Operation 6.1 Activities prior to use Basic setting Height of sweeping brush is set Fuel tank is filled Throttle is set to STOP/off. 6.2 Start and stop KM Domus Start 1. Move throttle to Start 2. Pull starter rope 3. Motor is running 4. Move throttle to MAX Stop 1. Move throttle to STOP 2. Motor is off KM 70 G KM 80 G KM 100 G Start 1. Open fuel tap 2. Set Choke 3. Pull starter rope 4. Motor is running 5. Move throttle to full thrott…
-
10, Original Operation Manual Sweeper 689.03-40 - 10 7 Maintenance 7.1 Safety DANGER ! Risk of injury by inappropriately performed maintenance work! Defective work may result in serious bodily injuries and damage to property. Make sure that you have sufficient working space. Place components separately. Remount all components. Remount all safety covers. Keep the risk area clear of persons. Disconnect spark …
-
11, Original Operation Manual Sweeper 689.03-40 - 11 7.3 Maintenance work ATTENTION! Risk of injuries by combustion motors Cleaning and repair work must never be carried out during operation or when the machine runs idle, since this may result in burns and cuts. Stop machine and motor and let them cool down. Disconnect the spark plug connectors. Wear protection clothing and gloves for all work. Avoid con…
-
12, Original Operation Manual Sweeper 689.03-40 - 12 9 Technical data KM Domus KM 70 G KM 80 G KM 100 G Type 02 Type 02 Type 02 Type 02 Machine data Length x Width x Height, cm 86 x74x75 89x71x76 89x81x76 89x101x76 Deadweight (transport weight), kg 62 68 70 72 Drive speed Forward km/h Backward km/h 2.4 2.4 2.4 2.4 Brush speed 280 280 280 280 Climbing power, max % 12…
-
13, Cramer KM 70 G Type 02 Original Operation Manual Sweeper 689.03-40 - 13 10 Declaration of conformity EU Declaration of conformity pursuant to machine directive 2006/42/EC Annex II 1-A The authorized party with residence in the EU, Cramer GmbH Reimersstr. 36 26789 Leer herewith declares, that the following product Manufacturer: Cramer GmbH Reimersstr. 36 26789 Leer Product designation: Sweeper Make: Cramer GmbH Serial …
-
14, Cramer KM 70 G Type 02 Original Operation Manual Sweeper 689.03-40 - 14 11 Sweeping brush installation, Side cover installation Sweeping brush installation for KM Domus, KM 100 G Delivery, packaging, assembly ATTENTION! Squeezing hazard during installation! Parts of the body may be squeezed when components are mounted. Wear close-fitting clothing and protection gloves during assembly. Risk of high dead weight • The machine must not be lifted manually. • Pull the machine off the transporter by its …
-
15, Original Operation Manual Sweeper 689.03-40 - 15 2. Left brush 1. Left brush overview 1. Left brush 2. Washer 3. Washer with nibs 2. Press-fit the washer with nibs (no. 1) into the hollow body recess of the left brush. Lightly hit on it as needed. 1. Washer with nibs 2. Washer 3. Recess 3. Press-fit the washer (no. 2) in the recess on the outside of the left brush. 3. Assemble left and right brush shaft! 1. Plug feather key into brush shaft groove…
-
16, Original Operation Manual Sweeper 689.03-40 - 16 Side cover installation for KM Domus, KM 100 G Overview 1. Brush 2. Threaded rod 3. Side cover, left and right (rubber) Assemble side covers on the left and right As to item 3: 1. Position the rubber side covers over the cover plate holes as indicated in the drawing. 2. Push screws through holes from below. 3. Place punched disc over screw end on the other side and secure it by a …
