Blackbox Message In a Speaker Manual 

2, MIASmp3 Manual 27/01/2016 2 Contents 1. What is the MIAS? ......................................................................... 3 2. Supported Media Formats ............................................................. 3 3. In the Box ....................................................................................... 4 4. Setup Instructions .....................................................................…

3, Blackbox Message In a Speaker MIASmp3 Manual 27/01/2016 3 Thank you for purchasing the MIAS mp3 The MIAS is one of a range of products we offer specific to the heritage marketplace. We are confident that we have other products you will find useful and look forward to hearing from you again soon. T: +44 (0)1639 767007 | W: www.blackboxav.co.uk 1. What is the MIAS? The MIAS is a high quality atmospheric speaker with in-built PIR, allowing looping or movement activated audio content to be utilised in…

4, MIASmp3 Manual 27/01/2016 4 3. In the Box 1. MIAS 2. Power Supply and adapters 3. Mounting Bracket 4. Safety Cable 5. Metal Bar (for tightening bracket) 6. MicroSD to USB Converter, MicroSD Card …

5, MIASmp3 Manual 27/01/2016 5 4. Setup Instructions Setting up your MIAS is simple. You will need the following; x MIAS x Power Supply x MicroSD Card with content on (see programming section) x Mounting Bracket (if required) The MIAS is a self-contained unit, you simply need your content prepared appropriately and inserted into the SD Slot. How the MIAS plays content is determined by a config.txt file saved alongside your content. The following section (5. P…

6, Blackbox Message In a Speaker MIASmp3 Manual 27/01/2016 6 Powering Your MIAS Plug the power supply into an available socket and connect power to the MIAS via this input. Insert MicroSD Card Program your MicroSD card with the appropriate content (See programming section) and insert here. Adjust Volume Set volume to the desired level - clockwise to increase and anti- clockwise to decrease. PIR Operation The PIR will take 30 seconds or so to settle once the MIAS is first powered up…

7, MIASmp3 Manual 27/01/2016 7 4.1 Fixing Wall Bracket The MIAS is supplied with a wall bracket which is mounted as so; a. Loosen and remove the molded nut @ by turning it counter clockwise. Use the 'supplied metal bar (2) if necessary by inserting it in one of the holes on the molded nut (5). b. Pull the ball/shaft (3) out of the wall bracket (4). c. Slide on the molded nut (2) onto the ball/shaft (3) with threaded openin…

8, MIASmp3 Manual 27/01/2016 8 e. Tighten the "knurled" nut (1) using a crescent wrench until it is firmly seated against the back of the speaker and has fully locked the ball/shaft (3) and the speaker cabinet together. Please note that once this nut is tightened, it may embed some marks on the back of the speaker where the attachment is made. However, these marks will be covered by the nut (1). f. The back-up cord (8) pr…

9, MIASmp3 Manual 27/01/2016 9 k. Insert the programmed SD card label down into the SD card slot (14). l. Connect the DC power cable to the power input point (13). m. To adjust the volume, insert the terminal screwdriver into the volume control hole (15) turning it clockwise to increase the volume. Remove the screwdriver once have reached your desired volume 5. Programming the MicroSD Card The manner in which the MIAS…

10, MIASmp3 Manual 27/01/2016 10 Each MIAS is delivered with working test files and a Config.txt file which explains the various mode options. We suggest you do not delete these instructions from the txt document. The first 4 lines consist of the config, all those after the word END are instructions. 5.1 Mode Options The MIAS can play content in 4 ways. MODE=C Continuous All files play on a continuous one aft…

11, MIASmp3 Manual 27/01/2016 11 MODE=B Background Track 001 is always playing as a background track on loop, upon PIR trigger all other tracks are played in a sequential manner (as MODE=S) 5.2 Volume Options This is the master volume control, the volume dial on the reverse of the MIAS will alter the volume level up to this maximum. Volume=00 to 25 (25 = max) 5.3 Delay This decides how lo…

12, MIASmp3 Manual 27/01/2016 12 5.6 Content Naming Audio files are played in numerical order and must therefore be named 001 - 099. 5.7 Upload Content Simply take your pre-named audio files and prepared Config.txt file and upload these to the supplied MicroSD Card using the USB - MicroSD convertor supplied. 6.Specifications Speaker Driver Bass/midrange 100mm Drivers Tweeter 12mm Titanium Laminate Frequency Response 20Hz - 20kHz Power Handling 200W - 50W Sens…