Adash VA5 Pro Operation & User’s Manual

Operation & User’s Manual for Adash VA5 Pro Measuring Instruments (156 pages)

Specifications:

1287/1287191-va5_pro.pdf file (07 Sep 2023)
  • Manufacturer: Adash
  • Category of Device: Measuring Instruments
  • Document: VA5 Pro, File Type: PDF Operation & User’s Manual
  • Updated: 07-09-2023
  • Count of Pages: 156
Download VA5 Pro Manual (156 pages)

Read Adash VA5 Pro Document Online:

Data: UPD 7th September 2023

Adash VA5 Pro Measuring Instruments PDF Operation & User’s Manual (Updated: Thursday 7th of September 2023 04:51:24 AM)

Rating: 4.9 (rated by 19 users)

Compatible devices: CheckMate 3, 4900 Vibrio M, Blackbird OECD MDE1195, A4900 - Vibrio M, Young 05103-LC, 4900 Vibrio Ex, 4900 Vibrio III, 4400 VA4 Pro.

Recommended Documentation:

Text Version of Adash VA5 Pro Operation & User’s Manual (Summary of Contents)

(Ocr-Read of the Adash VA5 Pro Document (Main Content), UPD: 07 September 2023)
  • 97, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 97 Recorder Many of older engineers remember the past time, when the signal was recorded to the tape-recorder and consequently analyzed in Analyzer. Such approach had one important benef…

  • 91, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 91 Press Add button to create new note. New window appears. In the upper half area you can directly type the note. The User notes list is displayed in the bottom. The several wa…

  • 37, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 37 Tacho setting of tacho channel properties Settling Prolongation if you need longer time for sensor settling, use this item AC Sensors AC (alternate current) sensors are used fo…

  • 140, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 140 Zoom Switch buttons to the Zoom mode. Press the Tab or Backspace button to return the initial mode. Left / Right Arrow - Direction Change the direction number (on the selected …

  • 8, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 8 Balancer Settings .......................................................................................................... 105 Basic Settings ..........................…

  • 39, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 39 Position The angle of sensor. Usually used for proximity sensors and GAP measurement. Tacho The speed is measured from tacho channel. The signal contains one or more pulses…

  • 30, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 30 These options are used when the record is selected for analysis. It would be better to use example for explanation. For example we use record which length is 60 sec. We de…

  • 95, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 95 Select one item in the list and open it by pressing the Ok button. The selected trend will be loaded. The date and time after the Trend/History indicator means the …

  • 137, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 137 Measurement Definition The 1x amp+phase, orders and frf are available measurement for ADS. All parameters are the same as in the Analyser mode. You can change the settings any …

  • 101, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 101 Record Preview After the record is taken the preview of recorded signals is displayed. The record date, time and length are displayed behind the record's name in the stat…

  • 32, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 32 If you want to create your own note, then push Edit text button. Enter your note manually. Each line in text is one note. Press Enter button to add new line. Press Escape butto…

  • 58, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 58 AVG it is average value of all samples (total sum of absolute values divided by number of samples) Crest it is equal True 0-P/ RMS Kurtosis standard statistical formula f…

  • 112, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 112 The balancing mass will be recalculated (split) into two required angles. Select Balancer / Set Default Angle to return back to the original calculation. If the …

  • 68, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 68 orders FFT Output (for spectrum) amplitude spectrum power spectrum amplitude spectral density power spectral density (PSD) energy spectral density (ESD) Speed Period on, o…

  • 84, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 84 The Center line is related to the orbit measurement. We also need two sensors with known angles of mounting. Correct dc sensors positions (angles) must be set for correct ca…

  • 41, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 41 Power Off Switch off the instrument. …

  • 135, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 135 ADS The Adash Deflection Shapes modul enables to measure operating deflection shapes of the machine. ADS project The project must be created on the computer. The ADS software en…

  • 142, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 142 Measurement Press Start button. Two values are displayed, the Level of sound in dB and Shock Factor. The Shock factor is defined as Peak value divided by RMS value. It m…

  • 27, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 27 MENU Press the MENU button. Two parts SETTINGS and RUN appears. All MENU items will be explained. The underlined values are the default values (factory settings). …

  • 77, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 77 Orbit The A1 means, that the channel 1 is used for A orbit channel, similarly B2 means channel 2 is used as B. The position of A1 and B2 matches the sensor angles used for meas…

  • 48, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 48 The Type parameter displays current trigger settings as a note under the value. If you need to create same measurement on all channels set the All channels to yes. The Band fm…

  • 127, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 127 Lubri - the greasing control There is an increasing demand for an instrument which is able to simply check lubrication of rolling bearings and also the condition of these …

  • 132, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 132 Bump Test It enables to find the resonance frequency of machine body. Set the used channel and the number of hits for averaging. Test contains two parts. The level o…

  • 57, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 57 Export to csv Exports data of selected measurement to the csv file format. The file is saved to csv folder on the VA5_DISC. The measurement data are saved in individual l…

  • 105, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 105 Clear Data Erase all measured data, only the project header remains. Export Export selected project to VA5_DISC. New project Push the Project button and select the New …

  • 133, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 133 Response Spectrum In part 2 continue with hits. The spectrum is displayed after first hit and the the average is used for next hits. Look at the top right corner and m…

  • 20, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 20 Standard Cable Wiring The standard cable, which are the part of the VA5 set, have the sensor signal connected to the pin number 8. The second sensor wire is connected to the g…

  • 118, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 118 RUN 2 - Result Screen Mount the final masses to both planes. The angle is counted from trial mass position, which represents the 0 (zero) degrees. Each balancing m…

  • 59, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 59 Input channel Required only for response functions Output channel Required only for response functions FFT Window Rectangular, Hanning, Transient, Exponential The st…

  • 9, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 9 The delay of audio output .............................................................................................. 125 Playback Settings.......................................…

  • 115, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 115 Press START button and measurement will be taken. If you press the Edit button, then you can manually enter all values (balancing calculator function). Use the Tab for shif…

  • 15, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 15 Battery Charging Charge the battery only at 0 - 40°C (30 - 100 °F)! The POWER socket for external charger is on the top panel. The battery LED diode lights orange duri…

  • 75, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 75 G-demod Spectrum The signal is filtered in (DEMOD fmin, DEMOD fmax) range and demodulated then. Only the acceleration or voltage unit can be used. No integration of signal …

  • 102, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 102 AC1 – AC4 All channels can be mixed to one channel into wav file (like in music studio). The gain factor can be defined for each channel. When the zero is used, then this channel…

  • 6, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 6 Axe Y 63 Axe Z 63 Order Z 63 Detect Type 63 Peaks List 63 Synch Table 63 Bearing Faults 63 Orders Table 64 Statistics Table 64 Primary Cursor 64 View (for cente…

  • 49, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 49 Create the second measurement. Use the Meas / New Advanced item again. Change the Unit to g, the Band fmin to 500 Hz , the Band fmax to 25600 Hz and the Samples to 65536. Confirm th…

  • 89, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 89 If the Route Auto Forward parameter in the Global Settings is defined as on then the Set screen will be automatically closed, otherwise use the Escape to return back to …

  • 143, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 143 Camera The VA5 instrument is equipped with the optical camera. The picture from the camera is automatically on the screen a few seconds after opening the module. B…

  • 19, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 19 IN3 Socket 1 – GND 2 – DC2 3 – DC3 4 – DC4 5 – SHLD 6 – DC1 7 – GND 8 – AC3 Pay attention to possibility of connecting all four DC channels to IN3. IN4…

  • 131, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 131 with the same level would not be heard, it lies below the threshold of hearing. The unit of loudness is phon. The loudness level in phons of any sound is defined as bei…

  • 119, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 119 The effect of trial weight is low This message informs you that the effect of the trial mass is low. The percentual value is derived from ratio (amplitude of change vector/ amp…

  • 151, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 151 tacho amplitude (positive or negative) external (voltage) Signal Range: full, No Auto ranging Data acquisition: TRUE RMS, TRUE PEAK, TRUE PEAK-PEAK overall o…

  • 94, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 94 Push the Start button to start the measurement. The Measuring indicator contains additional information during the Runup measurement, the number of saved values …

  • 120, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 120 Total Mass Display the total balancing mass. It is a vector sum of all masses mounted to the rotor (basic + all trims). …

  • 113, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 113 Enter the number of the first blade. Then enter the number of the second blade. New balancing masses will be displayed. Select Balancer / Set Default Blades…

  • 28, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 28 MENU / SETTINGS Global Settings Display Route Values on, off When you want to go faster during the route and you do not want to look at measurement results after each po…

  • 154, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 154 On the next picture is the corresponding time signal with tacho pulses. The time signal foreruns (gets ahead of) the tacho signal of the 45°. The 45° appears on instru…

  • 22, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 22 Instrument Control You can control the instrument by buttons around the display or by touch-screen. Buttons on right side have these meanings. Escape / Cancel / Stop / No Up A…

  • 64, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 64 If the tacho was not used (the measurement does not contain the speed information), then move the cursor to the speed position. The bearing fault frequencies will be displa…

  • 63, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 63 Axe X lin, log Axe Y lin, log, dB Axe Z time scale according time of measurements speed scale according the speed of machine (tacho must be used) regular regular scale O…

  • 3, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 3 Units 28 Frequency unit 29 Speed unit 29 Power/Line Frequency 29 Phase range 29 Displayed Spectra in Cascade 29 Align Graphs 29 Graph Grid 29 Cursor Type 29 Rec…

  • 125, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 125 Stethoscope This module enables listening of vibrations. Use the standard headphones and connect them to the audio output on top panel. Enter the Stethoscope module. The 4 …

  • 100, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 100 Pretrig When the Start of Rec event occurs the recording is started. But you are able to save a signal before the event be defining the Pretrig length. Recording Remember to setu…

  • 147, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 147 Buttons for maximized IR Camera picture Note! The thm file doesn´t contain an image from optical camera. Cursor When a picture from IR camera is maximized you c…

  • 66, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 66 polar 2D complex view trend3D_t the 3D "tube" view, it is the nyquist graph expanded to Z axe (time scale) View (for phase shift) available only for tren…

  • 148, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 148 A4404 SAB and Virtual Unit Virtual Unit is the same software used in VA5 Pro vibration analyzer. You can use the Virtual Unit in Demo mode and see the VA5 Pro vibration analyzer w…

  • 13, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 13 Before Switching On General Warnings Only suitable ICP powered sensors can be connected to the AC signal inputs. If the measurement without ICP power is require…

  • 134, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 134 Analysis Using of the Graph Properties / Peaks list helps you to detect required frequencies. Buttons Start Repeat part 2 (the same trigger level) New test Star…

  • 52, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 52 When graph contains data the averages and speed notification appear in the graph's top right corner. See the graph 4. The 3/4 means the 3 of 4 averages has been taken a…

  • 23, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 23 Value Selection Select one item. Then push the right arrow or OK button to display available values. For example for Sensitivity you see this picture: User Defined Value…

  • 109, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 109 Push the Enter Trial button and enter the weight of trial. Confirm by Ok. The weight can be negative, it represents removing of mass (for example dismounting of old balancing ma…

  • 33, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 33 Signal Source The measurement can be taken from LIVE channels ( AC 1-4 or DC 1-4 ) or from RECORD (see Recorder chapter for understanding). All records saved in the m…

  • 54, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 54 Next available functions of the Control mode are Trend, Delta X, Zoom Z and Move Z. These functions are hidden now and will be shown in certain situations. The Backspace…

  • 76, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 76 G-demod Overall The signal is filtered in (DEMOD fmin, DEMOD fmax) range and demodulated then. Only the acceleration or voltage unit can be used. No integration of signa…

  • 12, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 12 VA5 Pro vs. A4404 SAB The VA5 Pro instrument, the A4404 SAB Signal Analyzer Box and the Virtual Unit application will be described in this user manual. This chapter shou…

  • 107, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 107 Units Settings Amplitude Selection from available units for used sensor Detect Type RMS, 0-P, P-P Speed Selection from available units for speed Mass Selection of unit for mass …

  • 21, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 21 A4409 - BNC Box This box can simplify the connection of more cables to VA5 inputs. The BNC input connectors are used on the top panel for connection of 4 AC chan…

  • 45, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 45 Enter the name of new set. Then press OK. Your new item appears in the displayed Project list (alphabetical order). The S letter after the name is the Set type indi…

  • 17, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 17 Until you are not on main screen, the VA5_DISC remains to be connected to the instrument processor and you cannot see it on your PC. The correct connection with PC is ann…

  • 80, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 80 Orders The amplitude and phase on speed frequency, harmonic frequencies and possibly subharmonic frequency. Order Spectrum (Order Tracking Analysis) The Band fma…

  • 103, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 103 Balancer Introduction The balancing process is based on standard measurements of amplitude and phase on the speed frequency. The VA5 balancer includes many special internal functio…

  • 98, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 98 New Create a new record and add it to a Project List. Copy The Copy functions copies only the parameters of the selected record, no recorded signals will be copied…

  • 25, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 25 Main Screen After the switching on the main screen appears. Modules The VA5 instrument contains many modules. Each module has an icon on the main screen. Use arrows or double ta…

  • 42, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 42 Speed detection You need to know the speed of the measured machine in some cases. Usually the route readings has set the Detected speed from DDS. We will describe here how the speed de…

  • 35, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 35 Usually the taking of measurement (for example time signal) begins exactly from the trigger moment. But in some applications you are interested also to know the signal before trigger. …

  • 92, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 92 Speed in the Route There are various ways how to get the speed and transfer it to DDS. The ways are described here in the order from the lowest priority to the highe…

  • 46, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 46 The L2 letter after the name is the Level 2 type indication. Open the Project by OK. The empty list of L1 items appears. Press L1 button and select New. Enter the name of…

  • 81, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 81 Order full spectrum Set Full Spectrum to yes. Remember to set correct angles of both sensors. It influences the calculation. The FFT is applied to complex signal, first c…

  • 108, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 108 Single Plane Balancing RUN 1 Screen The red bearing house is the recommended point for sensor mounting. But you can use any other place, which is suitable for measurements. Press…

  • 34, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 34 manual sequential Similar to manual, but every measurement for averaging must be start separately. For example when AVG=10, then the START button must be used 10 time…

  • 78, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 78 Filtered Orbit Filtered orbit is built up from two order analysis readings. Correct sensors positions (angles) must be set for correct calculations as for st…

  • 114, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 114 The recommended trim mass is displayed. After the mounting press the down arrow. The TRIM 1 screen appears. It is the same screen as RUN 3 screen. Run the measurement or enter the val…

  • 96, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 96 the default setup for the Runup module. If you want absolute date and time change the Trend Time Axe parameter in the MENU / Runup to a real time value. Trend Menu When the list of…

  • 60, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 60 Now when the window is well set change the view back to the spectrum and take your final reading. In case of the frequency response function you setup two FFT w…

  • 61, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 61 Samples value Number of samples ( Speed control = off). The signal time length is displayed under this item. Lines value Number of lines. The signal time length…

  • 7, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 7 Creation of the route tree................................................................................................. 87 Route Measurement.......................................…

  • 128, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 128 Sensor mounted near to lubrication point If vibration diagnostic measurements are performed on a machine, then a measurement pad is already mounted. This pad can be…

  • 69, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 69 FASIT There is detailed description in the FASIT module chapter. If the FASIT is measured, the speed detection is done before the measurement itself (see the Speed detectio…

  • 87, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 87 Route Loading of the route to the instrument The cooperation with DDS software is required for the route measurement. See also the DDS user manual for more details. We…

  • 150, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 150 Appendix A: Technical Specification Inputs Dynamic Channels (AC) Number of synchronous parallel channels (AC): 4 AC Frequency range (-3dB): 0.35 - max 90000 Hz (196 k…

  • 44, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 44 Project List The first Analyzer screen contains the list of Projects saved in the memory or the empty list, when no Projects were saved. The time and date of last savin…

  • 36, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 36 Axe X lin, log Axe Y lin, log, dB Peaks list on, off Graph Lines continuous, discrete Sensors When you connect the sensors to the instrument, you have to tell wha…

  • 82, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 82 If you want to enter the value manually, then select Manual Entry to yes. All manual inputs are required before the measurement. The new window for each one appe…

  • 85, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 85 Cepstrum Used algorithm is cepstrum(x) = inv (fft(log10(abs(fft(x))))) x signal fft fourier transform abs absolute value log10 common logarithm inv inverse funct…

  • 121, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 121 FASIT The FASIT means the FAult Source Identification Tool. This mode should help beginners to determine the machine condition. Setup Select the FASIT module. The menu …

  • 117, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 117 RUN 2 with trial mass in plane 2 The same two measurements we have to take with trial mass on plane 2. The screen for those measurement looks similarly like previous screen…

  • 122, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 122 FASIT screen Each horizontal bar displays the severity of individual item. It starts from green color on the left to the red on the right. The machine condition ba…

  • 29, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 29 Units available in measurement setup. Frequency unit Hz, RPM, CPS, CPM Speed unit Hz, RPM, CPS, CPM Power/Line Frequency It is used for Elect value in Synch tabl…

  • 50, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 50 The Set screen contains five graphs of just defined measurements. The graphs don't contain data yet. The Graph 3 / 5 text in the status bar top right corner says that the third…

  • 146, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 146 Gallery The images from the camera, IR camera and also all screenshots (MENU / Screenshot) can be watched in the Gallery. You can watch the images as icons or one image on screen. …

  • 93, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 93 Runup Measurement Control When you need to measure Run Up or Coast Down of the machines, then you should use the Runup module. It enables the same measurements as in Analyzer mode, but…

  • 106, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 106 Image Selection of machine image, different images are available for single and dual plane balancing Look left, right view direction (only for single plane balancing) Rotation CW,…

  • 116, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 116 Use the Enter Trial button for re-entering of the trial mass, if it is required. The corresponding plane for trial mass mounting is demonstrated by the red disc. …

  • 136, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 136 Copy Copy selected project to new project. Rename Rename selected project. Delete Delete selected project. Clear Data All readings (measurements) will be deleted. Export …

  • 67, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 67 View (for spectrum) available for trend amplitude one spectrum amplitude graph cascade waterfall graph spectrograph 2D view of amplitudes vs. time phase one spe…

  • 110, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 110 Use the down arrow to move to the next screen. The trial mass can be left on the rotor or can be removed from the rotor after trial run. Before the RESULT screen yo…

  • 99, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 99 Record Settings The Records Settings dialog opens automatically when you open a record without data. You can also open the dialog by pressing the Recorder button when …

  • 139, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 139 Machine+Measurement View Both previous screens are displayed together. The user can select one of them (the red border) with the View button and to work with it. Differe…

  • 24, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 24 You can also enter a decimal point or minus symbol by several pushes of zero button. Use Backspace button to delete entered characters. Use Ok button to confirm the value or Escape butto…

  • 130, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 130 Octave Analysis The Octave Analysis module is a subset of the Analyzer module. It enables only sound measurements. Unlike the Analyzer, the Octave analysis enables the exponent…

  • 56, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 56 New Advanced Creates new advanced measurement, where all parameters are available. You can edit type and parameters of the measurement as you need. Then press the Ok button and n…

  • 70, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 70 RMS and true peak measurement are generally independent. The only rule is that the peak value is always bigger then RMS value. Let's change the Avg to 8. The eight…

  • 104, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 104 Also next functions for projects managing are enabled. Open the Project menu by pushing the Project button. New Create a new project with default properties. Copy …

  • 155, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 155 Dual channel measurement We must always define the channels of A and B. For example we use channel 1 as A and channel 2 as B. You have to always assign the channel numbe…

  • 65, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 65 time amplitudes View (for 1x amp+phase) available only for trend aps_t the trends of amplitude, phase and speed related to time of measurement ap_s the t…

  • 153, ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 153 Now we assume the tacho signal. The tacho pulse we put to the T0 position. T0 Corresponding time signal with tacho pulses is on the following picture. Now …

  • 79, Adash VA5 Pro ADASH Adash 4500 – VA5Pro For further technical and contact information visit www.adash.com or email: [email protected] 79 The speed measurement is taken 8 times in every second. The value is evaluated from 3 tacho events in time signal. When the averaging is required, then more values is us…

DOC-7c260bff:

Recommended:
B85H3-A3, BAR A70, P2DS Series, LS-V955

Additional Information:
# Brand Model Document Type/File Pages File Size Last Checked
1 C-LOGIC
580
4 23/09
2 Emerson
MicroMotion HPC010
32 20/11
3 GUILCOR
P41 1 Series
4 12/08
4 Campbell
CR3000 Micrologger
644 04/02
5 Hanna Instruments
HI 2221
44 19/11
6 Spectrum Technologies
Fieldscout TDR 350
32 16/08

Popular Right Now:

# Brand Model Document (PDF) Pages Size Check Date
1 Metz
Mecablitz 44 AF-3M
108 12.02.2024
2 Panasonic
PT-D5500
6 0.33 Mb 10.12.2023
3 HANNspree
DT04-12H1
1 0.78 Mb 13.12.2023
4 Epson
C82312
13 0.05 Mb 22.01.2024
5 Axis
M1103
50 3.44 Mb 03.10.2023
6 Paradyne
8600
62 0.76 Mb 19.02.2024
7 Targus
ACP60US
28 4 Mb 05.10.2023
8 Craftsman
137.229201
23 2.52 Mb 14.01.2024
Operating Impressions, Questions and Answers: