Ricoh J001 Service Manual

Service Manual for Ricoh J001 All in One Printer, Printer (670 pages)

Specifications:

1282/1282926-j001.pdf file (21 Jul 2023)
  • Manufacturer: Ricoh
  • Category of Device: All in One Printer, Printer
  • Document: J001, File Type: PDF Service Manual
  • Updated: 21-07-2023
  • Count of Pages: 670
Download J001 Manual (670 pages)

Read Ricoh J001 Document Online:

Data: UPD 21st July 2023

Ricoh J001 All in One Printer, Printer PDF Service Manual (Updated: Friday 21st of July 2023 02:38:24 PM)

Rating: 4.6 (rated by 44 users)

Compatible devices: Aficio C2500, G108, D197, RN-MF1, Pro C5300 Series, Aficio MP 201F, Aficio SP C242DN, FAX5600L.

Recommended Documentation:

Text Version of Ricoh J001 Service Manual (Summary of Contents)

(Ocr-Read of the Ricoh J001 Document (Main Content), UPD: 21 July 2023)
  • 244, SM 8-44 J001/J003 8.4.7 PAPER HALTS Problem Solution Event Service Center Call Response Probable Cause Operator Action Content User ST NRC Paper does not feed. Paper feeds then (1) After printing halts, check the spooling operation on the PC. Check the spooling operation on the PC. …

  • 172, ELECTRICAL COMPONENTS J001/J003 6-40 SM 6.8.5 DC RELAY BOARD The DC Relay board contains these important components and functions: • Detection of vertical position of the paper during feeding • High voltage power pack interface (Control Board ↔ Power Pack) • Tray 2 interface (Control…

  • 441, Ricoh J001 SP Tables J007/J010/J011 5-6 SM 1015 FDLEN:OFFSET Adjust Amount of LF Offset in Sub Scan Direction Use this SP to set the amount of line feed before the print head begins its 2nd pass during bi-directional printing. Do this SP when it is necessary to correct color offset that occurs during bi…

  • 309, Ricoh J001 i Read This First SAFETY INSTRUCTIONS For your safety, please read this manual carefully before you service machine. Always keep this manual handy for future reference. Safety Information Always obey the these safety precautions when using this product. Switches and Symbols Where symbols a…

  • 457, Ricoh J001 SP Tables J007/J010/J011 5-22 SM 5.2.6 GROUP 5000 Reset and Restoration Settings 5000 RST:FACT Restore Factory Default Setting Resets and threshold settings and user adjusted values. 5001 RST:INIT CNT:F Reset Initial Tank Fill Count to Manufacturing Operation Count Resets the initial f…

  • 204, SM 8-4 J001/J003 SERVICE CENTER CALL RESPONSE PROBABLE CAUSE OPERATOR ACTION SERVICE TECHNICIAN (ST) and/or NATIONAL RECLAMATION CENTER (NRC) ACTION slight gap between the side fences and the sides of the paper stack. correctly. not too tight. (4) Check the rear cover of Tray 2. Make …

  • 157, CARRIAGE DRIVE SM 6-25 J001/J003 Detailed Descriptions 6.6.2 CARRIAGE DRIVE A horizontal motor [A] drives the carriage unit via a timing belt [B] connected to the carriage. The horizontal encoder strip [C], mounted in front of the timing belt, is threaded through the horizontal encoder senso…

  • 170, ELECTRICAL COMPONENTS J001/J003 6-38 SM 6.8.3 DRV BOARD The DRV Board contains these important components and functions: • Phase control for the print head drive • Ink supply motor driver • Maintenance stepper motor driver • Sensor signal detection. Cartridge SN Ink Supply Motor …

  • 494, Ricoh J001 Ink Supply System J007/J010/J011 6-14 SM Size Color Capacity (cc M 25.48 Y 25.52 Large (for purchase) K 67.61 C 59.53 M 58.10 Y 57.97  The estimated service life of an ink cartridges is only a rough estimate.  The estimated service life may vary significantly due to the amount of cover…

  • 420, Transport Belt Charge Adjustments J007/J010/J011 4-34 SM 4.6.2 PRINT MODE TABLE The Print Mode Table is referenced to look up "Mj" (the print drive wave form) for the paper type and print quality items selected in the printer driver. The value of Mj retrieved from the Print Mode Table is used to se…

  • 120, CLEANING THE PRINT HEADS J001/J003 4-24 SM Cleaning Cycle 2 Important: Cleaning Cycle 2 uses a lot of ink. Do Cleaning Cycle 1 at least 3 times before you do Cleaning Cycle 2. 1. On the “Maintenance” sheet of the Printer Properties window, click “Clean Print Heads (Full)”. 2. Click the checkbo…

  • 291, SPECIFICATIONS SM 31 J006 J006 7. SPECIFICATIONS 7.1 PRINTER ENGINE BASE SPECIFICATIONS Configuration Desktop Printing Method On-Demand Ink Printing Paper Transport Belt System Delivery Face-up Ink Supply Method Zero Waste Dual Tank Method Ink (Y, M, C, K) High Viscosity, Fast Drying, Pi…

  • 56, OPTIONS J001/J003 1-24 SM 1.3.3 DUPLEX UNIT (OPTION) The Duplex Unit is provided with the J003. The Duplex Unit is optional for the J001. 1 Bypass Tray Guides The top of the Duplex Unit is also the bypass tray. Adjust these guides to the width of the paper at the time you feed paper from the bypass tra…

  • 345, Ricoh J001 PM Table SM 2-1 J007/J010/J011 J007/J010/ J011 2. PREVENTIVE MAINTENANCE 2.1 PM TABLE There are no maintenance procedures prescribed for periodic care or replacement. However, the "Service Call Procedures" listed below should be done by the service technician. For more details about…

  • 452, Ricoh J001 SP Tables SM 5-17 J007/J010/J011 J007/J010 J011 Set Charge for Target Market 1238 CHG:REGION Set Charge for Geographic Region Use the SP to set the charge for the areas listed below. 0: Enable geographical area setting 1: Japan 2: NA (North America) 3: Europe 4: China (Mainland) 5: China (Ta…

  • 294, SPECIFICATIONS J006 34 SM Printing Area J001, J003, J006 Paper Maximum Top, Bottom, Left, Right: 3 mm margins Recommended Top, Bottom, Left, Right: 4.2 mm margins Envelopes Maximum Top: 8 mm Bottom: 38 mm Left, Right: 3 mm Recommended Top: 8 mm Bottom: 38 mm Left, Right: 4.2 mm (1/6 in.) …

  • 566, Troubleshooting Call Center Manual 17 J007/J010/J011 J007/J010/ J011 Call Center Manual 6. Open the printer driver and do three "Head-Cleanings". 7. Print a Nozzle Check Pattern between each cleaning to check the result. 8. If three "Head-Cleanings" does not solve the problem, …

  • 66, CLEANING PROCEDURES J001/J003 2-6 SM 2.3.3 PRINT HEADS Nozzle Cover, Nozzle Plate 1. Remove the maintenance unit. (3.4) 2. Push the carriage to the home position (completely to the right). 3. Insert your hand into the opening [A] on the right side of the …

  • 532, Ricoh J001 Duplex Unit J007/J010/J011 6-52 SM 6.10.4 DUPLEXER SET SWITCH The Duplex Unit set switch [1], a micro-switch in the printer, detects the presence of the Duplex Unit. This occurs when the Duplex Unit is installed correctly on the back of the printer: The unit the set lever [2] depresses the Duplex …

  • 85, WASTE INK UNIT SM 3-13 J001/J003 Replacement Adjustment 3.5 WASTE INK UNIT 1. Remove the maintenance unit (3.4) 2. Disconnect the front tab ( x 1) 3. At the time you pull the waste ink unit [A] forward, raise it to about a 45 angle. Then remove it from the printer…

  • 128, TEST PRINT SAMPLE DESCRIPTION J001/J003 5-4 SM Product Name Shows the name of the product. Make sure the name of the product is correct before you request service information. Firmware Version (3 MB of data) This is the number of the original version of the firmware. This is the number of the firmwa…

  • 395, Self-Diagnostic Test Flow SM 4-9 J007/J010/J011 J007/010/ J011 4.2 SELF-DIAGNOSTIC TEST FLOW CÓPIA NÃO CONTROLADA CÓPIA NÃO CONTROLADA …

  • 572, Ricoh J001 Troubleshooting Call Center Manual 23 J007/J010/J011 J007/J010/ J011 Call Center Manual Instructions 1. If the size of the print job is very large, change the print mode. 2. If the problem is not related to the size of the print data, use the printer driver to switch to the EMF format spooling. Printe…

  • 253, SM 8-53 J001/J003 No Symptom Description Need to confirm Action 12 Ink end detected early Cyan ink Confirm if this problem is only cyan or not. Explain that compare with the other color, cyan ink is more often used. Printing data related Which kind of data is mostly printed? Explain th…

  • 492, Ink Supply System J007/J010/J011 6-12 SM 6.4 INK SUPPLY SYSTEM 6.4.1 OVERVIEW 1 Ink cartridges (x 4): Y, M, C, K 2 Ink Pump Unit 3 Ink Supply Tubes CÓPIA NÃO CONTROLADA CÓPIA NÃO CONTROLADA …

  • 154, Ricoh J001 MAINTENANCE UNIT J001/J003 6-22 SM 6.5.4 WASTE INK TANK FULL SENSOR The waste ink full sensor [A] is a “smart” reflective photosensor. The photosensor measures the changes in the density of the ink materials in the tank. This lets you know when the tank is full. A prompt shows the pr…

  • 226, Ricoh J001 SM 8-26 J001/J003 8.3 OTHER ERRORS 8.3.1 READY SERVICE CENTER CALL RESPONSE PROBABLE CAUSE OPERATOR ACTION Online (Normal) --- --- 8.3.2 PREPARING/ADJUSTING - 1 SERVICE CENTER CALL RESPONSE PROBABLE CAUSE OPERATOR ACTION Preparing/Adjusting The printer is warming up after being swi…

  • 106, SERVICE CALL ERRORS J001/J003 4-10 SM 4.3.3 SC ERROR CODE TABLE The SC codes for this printer is shown by the printer driver on the PC screen in the format “ERR***”. Where “***” is one of the three-digit codes shown in the tables below. Print the Test Print if you want to see the 5 most recen…

  • 177, BASIC OPERATION SM 6-45 J001/J003 Detailed Descriptions 6.9.2 PRINT HEAD MAINTENANCE RECOVERY OPERATION Filling Sequence Start ↓ Drawing Ink for Filling ↓ Print Head ↓ Print Head Bubble Discharge (Head Suction) ↓ Generate Initial Pressure (Head Suction) ↓ Wiping ↓ Wiping ↓…

  • 657, J007/J010/J011 64 Repair Center Manual Mixing the A and B liquids produces the foam. Left Right Foam Spray Gun Vinyl Bag The mixture of liquids A and B is sprayed into a vinyl bag. Foam Spray Gun The foam begins to form a few seconds after the mixture is sprayed into the bag and the…

  • 483, Important Parts SM 6-3 J007/J010/J011 J007/J010/ J011 press them down again after reinstalling the duplex unit. 7. Ink collection tank cover Open and remove the ink collection tank when it needs to be replaced, or before servicing the printer. 8. NIB cover Remove this cover to access the …

  • 644, Important Procedures Repair Center Manual 51 J007/J010/J011 J007/J010/ J011 Repair Center Manual Drive Cleaning Procedure Follow the procedure below to do drive cleaning. Here are some important points you should know about drive cleaning.  Drive cleaning should be done only after hea…

  • 650, After Repair Repair Center Manual 57 J007/J010/J011 J007/J010/ J011 Repair Center Manual Cleaning the Machine Before Storage Cleaning cartridges that contain liquid cleaner will be provided as service parts. These cleaning cartridges will be used in the field to purge ink paths, print head, sub tanks, and no…

  • 351, Easy Removals J007/J010/J011 3-4 SM 3.2 EASY REMOVALS  Switch the printer off and disconnect it from the power supply before you do the procedures in this section.  To avoid ink spills, never turn the printer upside down or set it on either its left or right side. The printer must always remain upri…

  • 642, Important Procedures Repair Center Manual 49 J007/J010/J011 J007/J010/ J011 Repair Center Manual Adjusting Registration Do this procedure to adjust the print start position. The print start position is the point at the upper left corner of each sheet where printing begins. 1. Push [Menu] selec…

  • 558, Ricoh J001 Troubleshooting Call Center Manual 9 J007/J010/J011 J007/J010/ J011 Call Center Manual Printer cannot print Are the hardware connections secure and the software application settings correct? Instructions 1. Check the Status Monitor. Follow the Status Monitor instructions to solve the problem. 2. C…

  • 543, Ricoh J001 Specifications J007/J010/J011 7-6 SM Type Name Feede Size Bypass Tray 1 Tray 2 Face- up Duplex A4 SEF 210 x 297 mm Y Y Y Y Y B4 SEF 257 x 364 mm N N N N N B5 SEF 182 x 257 mm Y Y Y Y Y B5 LEF 257 x 182 mm N N N N N B6 SEF 125 x 176 mm N N N N N …

  • 488, Carriage Unit J007/J010/J011 6-8 SM  Plastic bellows. A spring forces out the flexible, thin plastic film on the left side of the ink tank.  Ink level lever. When the ink tank is mounted in the printer, this lever pushes the bellows down to increase pressure in the ink reservoir. The ink level sens…

  • 615, J007/J010/J011 22 Repair Center Manual Unrecoverable Jamming Bypass Tray Paper feed jam – Bypass tray (Double Feeding) Description: The registration sensor did not detect the leading edge of the paper fed from the bypass tray. Probable Cause: Registration sensor signals did not change, dirt, other…

  • 117, GENERAL TROUBLESHOOTING SM 4-21 J001/J003 Trouble- shooting Near Maintenance Time LED Color Action LED Display Power GREEN Flashes every 1 s. Cause: The printer requires maintenance. Solution: Read the message on the screen. Call for service and describe the problem. All LEDs Fla…

  • 171, ELECTRICAL COMPONENTS SM 6-39 J001/J003 Detailed Descriptions 6.8.4 COM BOARD The COM Board contains these important components and functions: • Carriage horizontal position detection • Paper leading edge, horizontal width detection • Temperature detection of the area near the pr…

  • 209, Ricoh J001 SM 8-9 J001/J003 SERVICE CENTER CALL RESPONSE PROBABLE CAUSE OPERATOR ACTION SERVICE TECHNICIAN (ST) and/or NATIONAL RECLAMATION CENTER (NRC) ACTION (3) ST Descriptions 3-1 Operation impaired by other causes. 1. Harness disconnected, damaged. 2. Sensor damage (bypass set sensor). 3. Control b…

  • 442, SP Tables SM 5-7 J007/J010/J011 J007/J010 J011 1103 CHG:W1:MID:2 MID: Mj1:ID2 1105 CHG:W1:MID:3 MID: Mj1:ID3 1107 CHG:W1:MID:4 MID: Mj1:ID4 Use this SP to set the pitch width of the charge applied to the MID area of normal paper (excluding the LE/TE) for printing in the High Speed (Draft) …

  • 296, SPECIFICATIONS J006 36 SM 7.2 J006 PAPER SPECIFICATIONS Feed Size Bypass Main Tray Face-up Duplex Plain Paper A3 SEF 297 x 420 mm Y Y N Y Y A4 SEF 210 x 297 mm Y Y Y Y Y A4 LEF 297 x 210 mm N N N N N A5 SEF 148 x 210 mm N N N N N A5 LEF 210 x 148 mm Y Y N Y Y A6 SEF 105 …

  • 267, REPLACEMENT AND ADJUSTMENT SM 7 J006 J006 9. Release the ink supply tubes [A] from the clamps on the back of the ink supply unit. Important: Reconnect the tubes in order from left to right: K, C, M, Y 10. Pull out the ink supply unit [A]. 11. Remove the screw [B] of the waste ink col…

  • 422, Ricoh J001 Transport Belt Charge Adjustments J007/J010/J011 4-36 SM Print Drive Wave Form: Mj2 Table 3-2 Mj2 Temperature/Humidity Table (T913) Print Drive Wave Form: Mj3 * Table 3-3 Mj3 Temperature/Humidity Table **T914  At present there is no print mode that accesses Print Wave Form Mj3 Print Wave Form: Mj…

  • 288, Ricoh J001 DETAILS J006 28 SM 6.5.5 SUB ENCODER (DC RELAY) BOARD J001/J003 Manual Reference 6.8.5 DC Relay Board Comment A few minor changes. SUB ENCODER BOARD P2CTL AC High Voltage Power Tray 2 Feed CL Trailing Edge SN +37V PP_ENBL_N,PP_TRG_N PP_LEAK,COV_OPN TRY_SET TRYMT_CLK,TRYMT_TRG,TRCL_TRG +…

  • 493, Ricoh J001 Ink Supply System SM 6-13 J007/J010/J011 J007/J010/ J011 6.4.2 INK CARTRIDGES 1 Color index tab 2 Grip 3 Release 4 Contacts 5 Ink supply port There is a separate ink cartridge for each color (Y, M, C, K). Each ink cartridge is vacuum packed. Ink cartridges are available in different sizes. �…

  • 381, Cleaning Procedures J007/J010/J011 3-34 SM 3.5.3 FLUSHING GATE CLEANING Dry ink flakes that collect around the flushing gate can cause streaking in printouts. 1. Open the top cover. 2. Use the tip of a screwdriver or other tool wrapped in soft cloth to remove the ink that has hardened inside…

  • 243, Ricoh J001 SM 8-43 J001/J003 Problem Solution Event Service Center Call Response Probable Cause Operator Action Content User ST NR C SC 973 (All LEDs flash) (1) Switch the printer off and on. Check the Status Monitor for errors. 973 Check the Status Monitor for errors: 973 X …

  • 502, Ricoh J001 Ink Supply System J007/J010/J011 6-22 SM  Only the first vent can siphon ink from the print head into the ink collection tank. Another cam on the main shaft presses the maintenance unit up so the C print head covers the first vent. Next, the maintenance motor reverses. The one-way clutch dis…

  • 162, PAPER FEED, TRANSPORT, OUTPUT J001/J003 6-30 SM 6.7.4 PAPER END, TRAILING EDGE DETECTION There is no mechanism to detect paper end in the paper cassette or the paper feed unit. A feeler [A] rises when a sheet of paper gets fed. This turns the trailing edge sensor [B] on. After the sheet passes, the feel…

  • 374, Ricoh J001 Component Removal SM 3-27 J007/J010/J011 J007/J010/ J011  Avoid touching the edges of the vertical encode sensor wheel. 3. Insert a screwdriver between the frame and the hub of the wheel on its shaft. 4. Slowly turn the screwdriver to the left and right to free the wheel from the shaft. Reassemb…

  • 223, Ricoh J001 SM 8-23 J001/J003 (3) ST Descriptions 3-1 Operation impaired by other causes. 1. Harness disconnected, damaged. 2. Maintenance unit defective. 3. Carriage defective. 4. Feeler of the sensor is out of position. 5. The FFC and registration sensor harnesses are tangled. 1. Chec…

  • 361, Removing the Covers J007/J010/J011 3-14 SM 3.3.8 LEFT FRONT COVER 1. Remove:  Ink cartridge cover.  Front cover ( x2, x1) 2. Remove screw [A] ( x1)  One tab slot is on the front bottom edge of the left front cover.  To avoid breaking the slot, use the head of a small screw to d…

  • 397, Ricoh J001 SC Error Codes SM 4-11 J007/J010/J011 J007/010/ J011 4.3 SC ERROR CODES 4.3.1 SUMMARY OF ERROR LEVELS Level Definition Typical Errors A The printer is damaged or disabled, and the printer cannot operate. Even after removing the cause of the problem, turning the printer off and on does not so…

  • 516, Electrical Component Functions J007/J010/J011 6-36 SM 6.7.3 CCB The CCB (Cartridge Control Board), mounted in the cartridge holder behind the right front door of the printer relays signals between the control board and the ink pump motors and relays the ID chip signals.  The ink pump motor …

  • 339, Ricoh J001 B-Finder Setup Procedure J007/J010/J011 1-24 SM 1.6 B-FINDER SETUP PROCEDURE The following procedure is done after the machine has been installed. NOTE: z This procedure is necessary in order to use the e-mail notification function. z See the HTML Operating Instructions for more details on the …

  • 311, iii the machine could cause a fire and personal injuries. Organic Cleaners  During preventive maintenance, never use any organic cleaners (alcohol, etc.) other than those described in the service manual. (Refer the “2. Preventive Maintenance” in the Service Manual.)  Make sure the room is we…

  • 116, GENERAL TROUBLESHOOTING J001/J003 4-20 SM Ink Out LED Color Action Power GREEN On. LED Display YMCK RED On. Cause: One or more of the Print cartridges is out of ink. Solution: Be sure to confirm on the printer operation panel Print cartridge(s) have run out. Replace the empty Print cartridge. Ca…

  • 64, Ricoh J001 CLEANING PROCEDURES J001/J003 2-4 SM Right Air Vent 1. Use a screwdriver or similar tool to remove hardened ink from inside the right air vent [A]. 2. Use a dry cloth to remove ink splatter from inside the right air vent. G707P904.BMP [A] CÓPIA NÃO CONTROLADA CÓPIA NÃO …

  • 446, Ricoh J001 SP Tables SM 5-11 J007/J010/J011 J007/J010 J011 mode, except: normal paper in High Speed (Draft) mode and glossy paper in High Quality mode. This SP setting is linked to the charge pitch tables (SP1200 to SP1231). The IDs are determined by the temperature and humidity. There are 4 IDs associated with the SP nu…

  • 130, UPDATING THE FIRMWARE J001/J003 5-6 SM 5.3 UPDATING THE FIRMWARE Important • The printer must be connected directly to a PC by a USB cable; therefore, the firmware cannot be updated with Windows 95. • The printer must be set up and ready for normal operation. 1. Download the version…

  • 205, SM 8-5 J001/J003 SERVICE CENTER CALL RESPONSE PROBABLE CAUSE OPERATOR ACTION SERVICE TECHNICIAN (ST) and/or NATIONAL RECLAMATION CENTER (NRC) ACTION 1-2 Do not use curled (more than 2 mm) or wrinkled paper, especially for duplex printing. If the curl or wrinkling cannot be removed before p…

  • 340, Ricoh J001 B-Finder Setup Procedure SM 1-25 J007/J010/J011 J007/J010/ J011 3. Input the SMTP Server Name (see photo). NOTE: It is possible to use an IP address as the server name. 4. Do any other settings on the customer’s server that are necessary to send email from the NIB. 5. In the screen b…

  • 179, IMAGE PROCESSING SM 6-47 J001/J003 Detailed Descriptions 6.10 IMAGE PROCESSING Here is a brief summary of the steps in image processing: • Print Job. The software application sends the print job to the printer driver. • Band Processing. The print job gets divided into units of bands. • Inter…

  • 541, Specifications J007/J010/J011 7-4 SM Weight Standalone Less than 14 kg (30.8 lb.) J007/J010 With Option (Bypass) Less than 16.5 kg (36.3 lb.) Standalone Less than 15.5 kg (34.1 lb.) Printer Weight J011 With Options (Bypass + PFU) Less than 23.5 kg (51.7 lb.) Paper Types Tray 1 (Standard) S…

  • 643, Ricoh J001 J007/J010/J011 50 Repair Center Manual [#Enter]. 14. Enter the adjustment for the Feed Direction determined in Step 9 and push [#Enter] 15. Push [Online] to leave the Menu mode. CÓPIA NÃO CONTROLADA CÓPIA NÃO CONTROLADA …

  • 517, Electrical Component Functions SM 6-37 J007/J010/J011 J007/J010/ J011 6.7.4 DIB The DIB (Duplex Interface Board) interfaces between the duplexer and the control board.  The duplex unit set sensor detects whether the duplex is unit is installed correctly. The printer cannot be used if the dupl…

  • 393, Ricoh J001 Printer Display Summary SM 4-7 J007/J010/J011 J007/010/ J011 4.1.4 STATUS MONITOR MESSAGES Here is a brief summary of the Status Monitor error messages. For more, please refer to the User Guide.  At the time of writing the exact wording of the messages that show on the Status Monitor compu…

  • 450, SP Tables SM 5-15 J007/J010/J011 J007/J010 J011 1225 CHG:PITCH:D2 Mj4: 10% → 25% Lookup Table 1226 CHG:PITCH:D3 Mj4: 25% → 35% Lookup Table 1227 CHG:PITCH:D4 Mj4: 35% → 45% Lookup Table 1228 CHG:PITCH:D5 Mj4: 45% → 55% Lookup Table 1229 CHG:PITCH:D6 Mj4: 55% → 65% Lookup Table …

  • 79, Ricoh J001 BASIC REMOVAL PROCEDURES SM 3-7 J001/J003 Replacement Adjustment 3.2.6 PRINT CARTRIDGE COVER, REAR COVER 1. Remove: • Output tray (3.2.2) • Paper cassette (3.2.3) • Top cover (3.2.4) • Right front door (3.2.5) 2. Pull out the Print cartridges (K, C, M, Y) 3. Remove t…

  • 638, Ricoh J001 Important Procedures Repair Center Manual 45 J007/J010/J011 J007/J010/ J011 Repair Center Manual Adjusting Paper Feed Print the ‘Adjust Paper Feed Test Pattern’ and do this adjustment if you see broken horizontal lines or uneven colors in the printouts: 1. Push [Menu], select "Maintenance…

  • 260, J006 ii SM 6.1 PRINT CARTRIDGES ................................................................................. 19 6.2 PRINT CARTRIDGE SET DETECTION ...................................................... 20 6.3 WASTE INK TANK FULL SENSOR ............................................................ 21…

  • 357, Ricoh J001 Removing the Covers J007/J010/J011 3-10 SM 3.3.4 REAR COVER 1. Remove:  Ink collection tank  NIB cover and NIB (if installed)  Duplex unit, Guide plate 2. Remove the screws [A] and [B] ( x 2). The rear cover is fastened to the rear bottom edge of the printer by two tabs. 3. Under th…

  • 373, Component Removal J007/J010/J011 3-26 SM 3.4.8 VERTICAL ENCODER SENSOR  Work carefully to avoid bending or scratching the edge of the vertical encoder sensor wheel. 1. Unfasten the vertical encoder PCB by removing screws [1], [2] ( x2). 2. Disconnect and remove the vertical encoder …

  • 184, DUPLEX UNIT (OPTION) J001/J003 6-52 SM 6.11.5 BYPASS When the Duplex Unit is installed on the back of the printer (J001), the top of the Duplex Unit [A] is used as the bypass tray. The bypass tray cannot hold stacks of paper. Paper can only be fed one sheet at a time. You must wait for instructi…

  • 344, PREVENTIVE MAINTENANCE SECTION 2 PREVENTIVE MAINTENANCE REVISION HISTORY Page Date Added/Updated/New None CÓPIA NÃO CONTROLADA CÓPIA NÃO CONTROLADA …

  • 649, J007/J010/J011 56 Repair Center Manual Checking the QA Sheet No. Check Item Check Point Correction Nozzle Check Colors uneven? Colors missing? 1. Do "Head-Cleaning" 3 times. 2. Do "Head-Flushing" once. Encoder Check No white vertical lines, streaks? 1. Clean horizo…

  • 285, DETAILS SM 25 J006 J006 6.5.2 CONTROL BOARD J001/J003 Manual Reference 6.8.2 Control Board Comment The J006 has a new control board. ASIC:TOTTI2 Vertical Motor Horizontal Motor Sub Scan Main Scan Air Release SOL Drive Feed CL Operation Panel Button LEDs 37V Power ON 5V Current…

  • 618, Troubleshooting Repair Center Manual 25 J007/J010/J011 J007/J010/ J011 Repair Center Manual Replacement Procedure: 1. Replace encoder sensor. 2. Check the maintenance unit. 3. Replace maintenance unit. Jam between trailing edge sensor and registration sensor Description: The leading edge of the inve…

  • 192, SPECIFICATIONS J001/J003 7-2 SM Printing Speed Normal Paper Normal Paper Mono/Color J001 J003 High Speed Monochrome 9.0 ppm 14.0 ppm Color 7.3 ppm 11.4 ppm Std. (Speed Priority) Monochrome 8.8 ppm 13.5 ppm Color 7.0 ppm 8.2 ppm Std. (Quality Priority…

  • 138, CARRIAGE UNIT J001/J003 6-6 SM 6.3.2 PRINT HEAD The Wide Print Head is larger than those of previous models. The wider print head increases the width of the band printed with one pass. This allows the machine to print faster. Print Head Specifications Item J001 J003 Number of Print …

  • 435, Ricoh J001 SERVICE TABLES SECTION 5 SERVICE TABLES REVISION HISTORY Page Date Added/Updated/New 27 02/20/2007 Group 7000 SP Modes 31 09/03/2008 SP Tables 32 ~ 41 09/03/2008 SP Mode CÓPIA NÃO CONTROLADA CÓPIA NÃO CONTROLADA …

  • 624, Troubleshooting Repair Center Manual 31 J007/J010/J011 J007/J010/ J011 Repair Center Manual Ink Ink cartridge cover open Description: Ink cartridge cover (right front door) was open. Probable Cause: Cartridge cover sensor signal did not change, or the tab of the Ink cartridge cover open sensor is bent or br…

  • 255, Ricoh J001 SM 8-55 J001/J003 No Symptom Description Need to confirm Action 24 Non-recognition of duplex unit Instruct customer to re-set duplex unit and make sure the unit is correctly locked. if the printer configuration does not include duplex unit, make sure the bi-direction comm…

DOC-7f1eb41c:

Recommended:
KE-205, Powernode, Showcase Galaxy S, Scorpion Ultra 12

Additional Information:
# Brand Model Document Type/File Pages File Size Last Checked
1 Epson
Stylus Pro 10600 - UltraChrome Ink - Stylus Pro 10600 Print Engine
8 0.7 Mb 11/08
2 Epson
Stylus SX445W
66 1.2 Mb 15/02
3 Uninet
icolor 600
15 19/08
4 Canon
imagePROGRAF TX-3000
1033 14/08
5 HP
10000s
330 4.52 Mb 14/11
6 Canon
iR6570 series
36 27/09

Popular Right Now:

# Brand Model Document (PDF) Pages Size Check Date
1 JBL
MR-18
7 05.12.2023
2 Casio
FX-300ES PLUS
32 0.92 Mb 14.09.2023
3 Desa
HRC101
8 0.53 Mb 29.12.2023
4 Sony
CYBER-SHOT DSC-HX100
297 4.88 Mb 16.11.2023
5 DOD
LS430W
28 31.10.2023
6 King Canada
8320SC
12 01.09.2023
7 IFM
Efector 200 O7P2 Series
3 26.09.2023
8 Curtis
PL4210A
35 3.84 Mb 03.01.2024
Operating Impressions, Questions and Answers: