sebaKMT Sebalog GT-3 Operation & User’s Manual

Operation & User’s Manual for sebaKMT Sebalog GT-3 Transmitter (46 pages)

Specifications:

1386/1386014-sebalog_gt3.pdf file (13 Nov 2023)
  • Manufacturer: sebaKMT
  • Category of Device: Transmitter
  • Document: Sebalog GT-3, File Type: PDF Operation & User’s Manual
  • Updated: 13-11-2023
  • Count of Pages: 46
Download Sebalog GT-3 Manual (46 pages)

Read sebaKMT Sebalog GT-3 Document Online:

Data: UPD 13th November 2023

sebaKMT Sebalog GT-3 Transmitter PDF Operation & User’s Manual (Updated: Monday 13th of November 2023 06:58:41 AM)

Rating: 4.6 (rated by 50 users)

Compatible devices: HT8S, LPDT, BIXLR42, 699, MCT-241, 1199, Centronik SunWindControl SWC441, Elector 600.

Recommended Documentation:

Text Version of sebaKMT Sebalog GT-3 Operation & User’s Manual (Summary of Contents)

(Ocr-Read of the sebaKMT Sebalog GT-3 Document (Main Content), UPD: 13 November 2023)
  • 1, Consultation with SebaKMT 1 User Manual GSM Transmitter Sebalog GT-3 Issue: 01 (01/2015) - EN Article number: 83923 Mess- und Ortungstechnik Measuring and Locating Technologies Elektrizitätsnetze Power Networks Kommunikationsnetze Communication Networks …

  • 3, Consultation with SebaKMT 3 Consultation with SebaKMT The present system manual has been designed as an operating guide and for reference. It is meant to answer your questions and solve your problems in as fast and easy a way as possible. Please start with referring to this manual should any trouble occur. …

  • 4, Terms of Warranty 4 Terms of Warranty SebaKMT accept responsibility for a claim under warranty brought forward by a customer for a product sold by SebaKMT under the terms stated below. SebaKMT warrant that at the time of delivery SebaKMT products are free from manufacturing or material defects …

  • 5, Terms of Warranty 5 Contents Consultation with SebaKMT ........................................................................................... 3 Terms of Warranty ........................................................................................................... 4 1 Safety Instruc…

  • 6, Terms of Warranty 6 5.6 Determining the GPS position using a smartphone/tablet ............................... 36 6 Working On-Site using the Commander-3 ................................................... 37 6.1 Determining and storing the GPS position ....................................................…

  • 7, sebaKMT Sebalog GT-3 Safety Instructions 7 1 Safety Instructions 1.1 General Safety Instructions and Warnings • Do not drop the device / the system’s components or subject it / them to strong impacts or mechanical shocks. • The limits described under Technical Data may not be exceeded. • The dev…

  • 8, sebaKMT Sebalog GT-3 Safety Instructions 8 The lithium batteries of the device are dangerous goods. The transport of the batteries itselves and of devices which contain such batteries is subject to regulations based on the UN Model Regulations “Transport of Dangerous Goods” (ST/SG/AC.10-1). Please inform yourself about…

  • 9, sebaKMT Sebalog GT-3 Technical Description 9 2 Technical Description 2.1 Device construction The GSM transmitter has the following control elements and external features: Element Description Status LED 1 x red, 3 x green ... when switching on Flashes blue ... device is switched on and ready for radio communica…

  • 10, Technical Description 10 The GSM transmitter makes it possible for the loggers with which it is connected to perform the following functions: • Regular uploading of measured data to an FTP server (once a day) • Regular transmission of measured data via email/SMS • Transmission of alarm message…

  • 11, Technical Description 11 The LOG RI/LOG RI+ device connects easily to the computer via a USB port. After connection, it activates itself automatically. The device is detected by the computer automatically and is immediately ready to establish a wireless connection. No other settings are required. The …

  • 12, Technical Description 12 2.4 Power supply The GSM transmitter is powered by internal lithium batteries of the brand Energizer Ultimate Lithium AA, but batteries from other manufacturers can also be used. The batteries must satisfy the following technical criteria: Parameters Value Type Lit…

  • 13, sebaKMT Sebalog GT-3 Technical Description 13 2.4.2 Replacing the batteries Empty batteries can be replaced by the user. We recommend that batteries of the same brand and type as those supplied with the device are used. If you prefer to use batteries from a different manufacturer, you should ensure that these batteries fulf…

  • 14, Technical Description 14 2.4.3 Resetting the internal logbook This step can be carried out using the Commander-3 or the computer. The GSM transmitter in question must be switched on and ready for wireless communication. Proceed as follows: Step Description Using the Commander-3 Using t…

  • 15, sebaKMT Sebalog GT-3 Technical Description 15 2.5 Specifications The GSM transmitter has the following technical parameters: Parameters Value Display Status LED Communication Short-distance radio transmission 868 MHz (in Europe) 913/916 MHz (depending on the country) Mobile communication GSM/GPRS modem, 850…

  • 16, sebaKMT Sebalog GT-3 Setting Up and Starting the Device 16 3 Setting Up and Starting the Device 3.1 Access to SIM card and battery compartment The GSM transmitter must be opened in order to gain access to the SIM card slot or the batteries. NOTE The device contains sensitive semi-conductor components. Take c…

  • 17, Setting Up and Starting the Device 17 To close the housing, first push the sealing plug carefully back into the housing and then screw the locking ring back on. Please note: • The rubber seal of the sealing plug and all contact surfaces must be free from dirt. • The thread of the locking…

  • 19, sebaKMT Sebalog GT-3 Preparatory Work in the Office 19 4 Preparatory Work in the Office 4.1 Mobile communication, FTP server, email account etc. For data transfer via mobile communication, a corresponding contract must have been concluded with a mobile service provider. You will need a SIM card which has been approved for…

  • 20, Preparatory Work in the Office 20 As soon as the SIM card has been inserted, the device should be programmed with the necessary GSM connection data so that a GSM connection test can be carried out. Additional information on programming the GSM transmitter and on the GSM connection test can be fo…

  • 21, sebaKMT Sebalog GT-3 Preparatory Work in the Office 21 4.5 Creating a GSM transmitter in the SebaDataView-3 software All GSM transmitters that will be used for the forthcoming measurement must be set up in the SebaDataView-3 software. Proceed as follows: Step Description 1 In the directory tree of the SDV-3 software, s…

  • 22, Preparatory Work in the Office 22 4.6 Programming the GSM transmitter 4.6.1 Entering the GSM settings and transferring to the transmitter The GSM transmitter must be programmed before the measurement is carried out. During this process, all necessary GSM configuration data is assigned to the device…

  • 23, Preparatory Work in the Office 23 4.6.2 Information on the GSM input window The figure shows the input screen for the GSM configuration data. This screen must be completed with all parameters that are required for the correct functioning of the mobile connection from/to the GSM transmitter. (The ne…

  • 24, sebaKMT Sebalog GT-3 Preparatory Work in the Office 24 Segment Parameters If you would like to use SebaKMT's demo server, select the Seba Demo Mode checkbox. The access data is then entered automatically. (Please note that this server may only be used on a short-term basis and for demonstration purposes only!) Use …

  • 25, Preparatory Work in the Office 25 Segment Parameters GSM Transmission Specify the days on which you would like the GSM modem of the GSM transmitter to be active (known as "GSM days"). It will only be possible to upload or send measured data or messages on these days. Segment Parameters W…

  • 26, Preparatory Work in the Office 26 Step Description 3 In the window, click on Check GSM. Result: The GSM test is launched. The GSM transmitter uploads a test file to the FTP server with the name "ftp-test.csv". The GSM transmitter also sends a test email or test SMS to all specif…

  • 27, Preparatory Work in the Office 27 4.8 Exporting a logger group from the SebaDataView-3 software and transferring it from the computer to Commander-3 If you are using Log N-3 noise loggers only, then all steps required on-site for installation of the logger and the GSM transmitter can be carried …

  • 29, Working On-Site using a Laptop 29 5 Working On-Site using a Laptop After completing the preparatory work in the office, all further steps are carried out at the place of installation using a laptop. The following prerequisites must be met: • Laptop with SebaDataView-3 software • A wireless in…

  • 30, sebaKMT Sebalog GT-3 Working On-Site using a Laptop 30 The GPS receiver features a status LED: • LED flashes at regular intervals … Device is searching for GPS signals; still not possible to establish position • LED permanently lit … GPS signals are being received; possible to establish position …

  • 31, Working On-Site using a Laptop 31 5.2 Programming and linking devices Specify which loggers you wish to use on-site and for linking to the GSM transmitter. During this step you can also set the measurement parameters for these loggers. You can set a maximum of three loggers. Proceed as fol…

  • 32, Working On-Site using a Laptop 32 Step Description 5 Would you like to select additional loggers for linking to the GSM transmitter? If so, use the second and third drop-down menus and repeat steps 3 and 4 for each additional logger. 6 In the GSM configuration window, click on Program at the botto…

  • 33, sebaKMT Sebalog GT-3 Working On-Site using a Laptop 33 5.3 Installing devices at the place of use Install the GSM transmitter together with the linked loggers at the place of use. The devices must be within the same range. Following installation, return the place of use to the exact state in which you found it (cl…

  • 34, sebaKMT Sebalog GT-3 Working On-Site using a Laptop 34 The following photos show real-life installation examples: Log P-3 pressure logger with GSM transmitter in a German underground hydrant. Log N-3 noise logger with GSM transmitter in a German gate shaft. Log N-3 noise logger with magnetic angled adapter and…

  • 35, sebaKMT Sebalog GT-3 Working On-Site using a Laptop 35 5.4 Testing the mobile connection Once the logger and GSM transmitter have been installed, checks must be carried out to verify that the mobile connection from the GSM transmitter has been set up without error. Perform a GSM test directly at the place of installation…

  • 36, sebaKMT Sebalog GT-3 Working On-Site using a Laptop 36 5.6 Determining the GPS position using a smartphone/tablet You can determine the GPS position of the place of installation using a smartphone or tablet instead of the laptop. The data is immediately uploaded to the SebaKMT Cloud or to your own server. The following pre…

  • 37, Working On-Site using the Commander-3 37 6 Working On-Site using the Commander-3 After completing the preparatory work in the office, all further steps are carried out at the place of use. You can use the Commander-3 for these steps rather than a laptop. The following prerequisites must be met…

  • 38, sebaKMT Sebalog GT-3 Working On-Site using the Commander-3 38 To determine the GPS position using the Commander-3, proceed as follows: Step Description 1 Connect the GPS receiver to the Commander-3. 2 Move close to the place of installation. 3 Open the menu in the main menu bar of the Commander-3. Result:…

  • 39, sebaKMT Sebalog GT-3 Working On-Site using the Commander-3 39 6.2 Programming the devices Specify which loggers you wish to use on-site and for linking to the GSM transmitter. During this step you can also set the measurement parameters for these loggers. You can set a maximum of three loggers. Proceed as follows: S…

  • 40, Working On-Site using the Commander-3 40 Step Description 9 Change the parameters and click Accept to confirm. Result: The screen switches back to the previous menu level. 10 Would you like to select additional loggers for linking to the GSM transmitter? If so, use the second and third drop-down men…

  • 41, Working On-Site using the Commander-3 41 6.3 Installing devices at the place of use Install the GSM transmitter together with the loggers at the place of use. The devices must be within the same range. Following installation, return the place of use to the exact state in which you found it…

  • 42, Working On-Site using the Commander-3 42 The following photos show real-life installation examples: Log P-3 pressure logger and GSM transmitter in a German underground hydrant. Log N-3 noise logger and GSM transmitter in a German gate shaft. Log N-3 noise logger with magnetic angled adapter and…

  • 43, Working On-Site using the Commander-3 43 6.4 Testing the mobile connection Once the logger and GSM transmitter have been installed, checks must be carried out to verify that the mobile connection from the GSM transmitter has been set up without error. A GSM test must be carried out directly at the place …

  • 44, Working On-Site using the Commander-3 44 Poor GSM test results may mean you will need to install the GSM transmitter in a different position to the one originally planned. The determined GPS position may therefore no longer be correct. In this case, you will need to work out the GPS position of …

  • 45, sebaKMT Sebalog GT-3 Working On-Site using the Commander-3 45 6.6 Determining the GPS position using a smartphone/tablet You can determine the GPS position of the place of installation using a smartphone or tablet instead of the Commander-3. The data is immediately uploaded to the SebaKMT Cloud or onto your own server. The fo…

  • 46, Working On-Site using the Commander-3 46 6.7 Transferring logger groups from Commander-3 to the computer and importing them into the SebaDataView-3 software As the final stage of preparatory work in the office, you exported the group data for the logger group in question from the computer to Commander-…

DOC-53bf714c:

Recommended:
32LN5700, KeyFolio Thin X2 Plus, DK100, guardian

Additional Information:
# Brand Model Document Type/File Pages File Size Last Checked
1 Emerson
Rosemount ET210
20 31/01
2 Conductix-Wampfler
ProfiDAT Programm 0514
82 21/11
3 Chamberlain
TC4
2 0.04 Mb 08/09
4 Greystone Energy Systems
ULP1
4 25/12
5 Emerson
Rosemount 2051 Wireless Series
40 14/08
6 Festo
SDAS-MHS
4 19/09
7 AquaMetrix
SHARK TX
82 18/02

Popular Right Now:

# Brand Model Document (PDF) Pages Size Check Date
1 Garmin
Approach S20
28 26.12.2023
2 Porsche
911 Carrera (996)
345 10.12.2023
3 Philips
202EL2SB
52 04.01.2024
4 Convaid
WC19
20 21.08.2023
5 PeakTech
5085
15 14.09.2023
6 Whirlpool
UPRIGHT FREEZER
28 20.01.2024
7 Sennheiser
HD 414
6 0.69 Mb 09.08.2023
Operating Impressions, Questions and Answers: