-
26, 18 System Components and Set Up X-100H (Hub) The X-100H hub (figure 7) connects to the connector port on the front of the monitor. The hub provides connections for up to six X-100SP signal processors via the hub ports. Each hub port has a protective port cover. For cleaning instructions, refer to "Care and Maintenance" on page 74. Connect/Disconnect the Hub 1. To connect: a. Align the arrow on the hub cable connector with the…
-
65, 57 System Menu Screen Set Institution Default Limits 1. While in the System Menu screen, use the navigation buttons to move to and highlight “Institution Default Limits.” 2. Press Select to review current settings. Pop-up window displays settings along with “Edit...” highlighted. •To change the setting, press Select and continue with step 3. •To cancel, press Menu. Display returns to System Menu screen. 3. Enter the in…
-
9, 1 Indications for Use Indications for Use Nonin’s SenSmart™ Model X-100 Universal Oximetry System is a modular system and is indicated for use in simultaneously measuring, displaying, monitoring, and recording up to six (6) channels of functional oxygen saturation of arterial hemoglobin (SpO 2 ) and pulse rate or cerebral or somatic hemoglobin oxygen saturation (rSO 2 ) of blood underneath the sensor. Patient p…
-
92, 84 Technical Information Table 18. Recommended Separation Distances This table details the recommended separation distances between portable and mobile RF communications equipment and this device. This device is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. Users of this device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communication equipment (transmitters) and the dev…
-
21, 13 System Components and Set Up Figure 2. System Set Up (≥40 kg Sensors, INT-100, 4 Channels Connected) Figure 3. System Set Up (≤40 kg Sensors, 4 Channels Connected) 8204C A 820 4CA 82 0 4CA 4C A 8204 C A 8204CA 8204CA 4CA 820 4CA 8204CA 82 04CA 4CA X-100H X-100M X-100SP Sensors INT-100 52 100 50 0 100 50 0 100 50 0 X-100H X-100SP Sensors X-100M
…
-
29, Nonin SenSmart X-100 21 System Components and Set Up Connect/Disconnect an INT-100 Intermediate Cable to the Signal Processor NOTE: The INT-100 is used to connect the 8204CA (patients ≥40 kg) sensor to the signal processor. 1. To connect: a. Flip the clear lock on the signal processor back to expose the connection port. b. Align the arrows on the INT-100 connector and the signal processor (figure 12-A). Insert the INT-100 connector into the signal processor connection port. c. Flip the lock over the …
-
33, Nonin SenSmart X-100 25 System Operation System Operation Start-up Sequence Each time the monitor is turned on, it performs a brief start-up sequence. 1. Press On/Standby. 2. The LCD display lights up and displays the Nonin logo (figure 17). 3. An audible tone sounds. Verify each of the above items occur on initialization. If any do not occur, contact Nonin Technical Se r v ice for assistan c e. Following the start-up sequence, the monitor displays the Selec…
-
2, Nonin ® reserves the right to make changes and improvements to this manual and the products it describes at any time, without notice or obligation. Nonin Medical, Inc. 13700 1st Avenue North Plymouth, Minnesota 55441-5443, USA +1 (763) 553-9968 (800) 356-8874 (USA and Canada) Fax: +1 (763) 553-7807 E-mail: [email protected] Nonin Medical B.V. Prins Hendriklaan 26 1075 BD Amsterdam, Netherlands +31 (0)13 - 79 99 040 (Europe) Fax: +31 (0)13 - 79 99 042 E-mail: [email protected] nonin.com …
-
83, 75 Parts and Accessories Parts and Accessories For more information about Nonin parts and accessories: •See the Part and Accessories List on the operator’s manual CD. •Contact your distributor or Nonin at (800) 356-8874 (USA and Canada), +1 (763) 533-9968, or +31 (0)13 - 79 99 040 (Europe). •Visit www.nonin.com WARNING: Use the Model X-100M only with power adapters supplied by Nonin Medical. WARNING: The use of sig…
-
49, 41 Presets Menu Screen 5. Using the Up/Down navigation buttons, select a preset to overwrite. NOTE: If the preset is locked, the message Cannot overwrite locked preset! displays. To unlock the preset, see “Lock/Unlock a Preset” on page 42. 6. Press Select. Preset name box displays along with alphanumeric keyboard screen. If updating an existing preset, continue to step 8. 7. Enter Preset name (maximum of 11 alphanumeric charact…
-
104, 96 External Monitor Installation Instructions c. Repeat as needed until up to 6 numerics have been assigned. 12. User may also setup Device Alarms (options include Accepted or Ignored) and Default Color. The X-100M numerics will display in the color chosen. 13. When setup is complete, select Store to Module to save settings to the VueLink module. Other options include Restore from Module and Recall Mo…
-
68, Nonin SenSmart X-100 60 Alarms Error Codes This device includes error codes that indicate problems with the unit. When an error occurs, the device emits a loud, two-tone, steadily beeping signal and an error code displays on the monitor screen. Error codes are indicated by the letter “E” and a two-letter code (table 13). To correct err o r conditions, perf o r m t h ese steps: 1. Turn the unit off and then back on again to remove the error code. 2. If the error persists, note the error code and cont…
-
103, 95 External Monitor Installation Instructions Philips Monitor Display Configuration The numerics transmitted from Nonin’s X-100M monitor to the Philips monitor will vary depending on which type of Philips interface module is used. VueLink Interface Module – Nonin’s X-100M rSO 2 and AUC real-time numeric data are transmitted to the Philips monitor through the VueLink Interface Module. Up to 12 numerics are tra…
-
31, 23 System Components and Set Up Connect/Disconnect a Sensor to the Intermediate Cable NOTE: The INT-100 is used to connect the 8204CA (patients ≥40 kg) sensor to the signal processor. 1. To connect: a. Slide the sensor lock on the INT-100 away from the port. b. Align the arrows on the sensor connector and the INT-100 (figure 15-A). Insert the sensor connector into the INT-100 port. c. Slide the sensor lock to the port. Secure the sensor lock so it covers the sides of the port and the senso…
-
62, 54 System Menu Screen Restore Factory Defaults 1. While in the System Menu screen, use the navigation buttons to move to and highlight “Restore Factory Defaults.” 2. Press Select. “Discard ALL presets and settings?” pop-up displays with “No” highlighted. •To cancel, press Select. •To restore factory defaults, press Down to highlight “Yes,” and then press Select. 3. Enter the institution …
-
4, Contents (Continued) ii Scroll Through the Timescale ....................................................................................... 31 Graph Set-up ................................................................................................................ 31 Settings Menu Screen ............................................................................................ 32 Settings Menu – Description…
