-
18, Page | 18 A fully discharged battery will take approximately 2 hours to fully charge and may not light the LED status indicator when first mounted. 3.4.3. G3100 Battery Installation and Replacement Removing the battery in use will cause the G3100 to restart or turn OFF. Use the battery status indicator in data collection software to confirm which battery is “in use”…
-
3, Page | 3 Table of Contents 1. Introduction..........................................................................................................5 1.1. User Notice.............................................................................................................................5 1.1.1. CE Mark..................................................................................................................5 1.1.2. W…
-
22, Page | 22 4.1.2. Select the prepared text file from the PC and click Open. Figure 11: Script File 4.1.3. The G3100 has been successfully reconfigured to the PENTAX Default when the commands appear in the bottom left corner of the main RxControl window. The commands and return messages will populate the expert console. Figure 12: Script Loading
…
-
24, Page | 24 . Figure 15: Expert Console 4.2.3. Select the SSRC1 tab and type the first command into the text box. sgpf, GP1, Output,none, LevelLow, then hit the Enter Key. Figure 16: Expert Console SSRC1 Display 4.2.4. The command will populate the screen (< “input”) followed by a return message (> “output”) indicating whether the command was accepted/valid ($R) or an invalid command ($R?). For more informati…
-
8, Page | 8 SIM & SD Card Compartment UHF Radio Antenna Figure 2: G3100, Rear View The rear view of the G3100 shows the door to access the SD card and SIM card. GNSS raw data can be saved to the SD Card, and the SIM card allows cellular service with the internal GSM modem. The ports and the product label can be seen on the underside of the G31…
-
31, Page | 31 6. List of Typical GNSS Related Acronyms APME A Posteriori Multipath Estimation ARP Antenna Reference Point ASCII American Standard Code for Information Interchange CMR Compact Measurement Record CPU Central Processing Unit CR Carriage Return CTS Clear to Send DGPS Differential Global Positioning System DOP Dilution of Precision EGNOS European Geostationary Navigation Overlay System ESTB EGNOS System Test Bed FPGA Field Programmabl…
-
25, Page | 25 4.2.5. Continue entering the commands into the text box, when completed the G3100that is connected has been reconfigured to the PENTAX Default. Figure 17: Commands & Responses
…
-
14, Page | 14 2.1.11.3. Formatting SD Card Use Windows OS computer to format the SD Card prior to use Figure 7: SD Card Formatting Assigned Drive Letter (may vary) SD Card Memory Capacity (Included 2GB SD Card) File system Volume label • Slide SD Card into SD Card reader • Windows will recognize SD Card as removable device and assign a drive letter • Right click on drive …
-
16, Pentax G3100-R1 Page | 16 3. G3100 Device & Specifications 3.1. Bluetooth Specification • CLASS 1 W/ANT HCI FW • Frequency 2402MHz ～ 2480MHz • version 2.0 3.2. Internal UHF Radio Specification • Operating Frequency: 406 MHz to 470 MHz • Occupied Bandwidth: 6.25kHz, 12.5kHz or 25kHz • Gain: 145-146dBm What you need to know How do I configure my UHF Radio? Configuration is done via data collector software My rover is no…
-
9, Page | 9 2.1.3. Shipping Case Contents Table 2: Shipping Contents G3100 UHF Radio Antenna CA25 2GB SD Card SIM Card Holder** Getac PS-535* (2) BP07 Lithium-ion Batteries BC05 Battery Charger AC05 AC Adapter MT02 Adapter GC17 Power Cable; unterminated * GC15 Controller Cable* GC16 Data Cable* *- Optional Items ** - SIM Card not included A full G3100 system consists of the following…
-
5, Page | 5 1. Introduction 1.1. User Notice This section provides information regarding CE, Warranty and Customer Service with Support. All specifications are typical and subject to change without prior notice. TI Asahi reserves the right for improvements and changes to this document, products and services without notice or obligation. 1.1.1. CE Mark The G3100 carries the CE mark, which indicates compliance …
-
7, Pentax G3100-R1 Page | 7 2. G3100 Overview 2.1. G3100 Key Features The G3100 is an all-in-one, cable free solution for your Surveying needs. It’s a simple and easy to use GNSS surveying product, which provides the following features: • 136 Channel AsteRx2e GNSS receiver, with L1/L2/L2C GPS, GLONASS and SBAS. • Bluetooth. • Internal GSM or CDMA Modem to communicate with RTK Networks. • Internal di…
-
20, Page | 20 3.5.2. Slant Height Dimensions Height of ARP =√【(SLANT HEIGHT)＾2 ― 0.0959＾2】― 0.225 Figure 9: Slant Height Dimensions
…
-
29, Pentax G3100-R1 Page | 29 Answer: Make sure that the serial cable (SER1) is disconnected. The serial cable takes precedence over Bluetooth® connectivity, and because of this Bluetooth® is unable to connect when the cable is attached. Also verify the Bluetooth® is ON/Visible on the controller. Lastly, uploading the PENTAX default script (using RxControl) will reset all COM ports and often fixes Bluetooth® con…
-
15, Page | 15 2.1.11.4. Known Compatible SD Cards Not all removable SD cards are guaranteed to be compatible with the G3100. The following SD cards have been successfully tested for G3100 compatibility. Table 7: SD Card Compatibility Memory Size Description Part # Approximate Capacity 256MB SanDisk ULTRA II SDSDH-256-901 ~27 hrs / ~1.1 days 1GB SanDisk Standard SDSDB-1024-A11 ~106 hrs / ~4.4 days 1GB SanDisk Stand…
-
13, Pentax G3100-R1 Page | 13 2.1.10.2. Installing SIM Card Turn Off G3100 to install or remove SIM card. Damage to SIM card may occur if installed or ejected with power ON. To Install/Remove SIM Card: • Unlock SIM & SD Card compartment by turning lock groove horizontal • Open SIM & SD Card compartment • Push the yellow SIM Card holder eject button to release SIM Holder • Pull out SIM Holder • Place SIM Card i…
-
23, Page | 23 Figure 13: Script Commands and Responses 4.2. Line-by-line entry 4.2.1. Connect the G3100 to the PC via the serial cable and start RxControl. Figure 14: RxControl Display 4.2.2. In the Tools tab select the Expert Console Menu and the Expert Console window will open.
…
-
11, Page | 11 soft reboot the receiver resets the firmware, while retaining the current configurations. In a hard reboot the G3100 will recall the receiver’s boot configuration file (default reboot). Table 4: Power Button Operations What to do ON Press and release, RED LED turns ON OFF Press and hold for 4 seconds and release or until power LED turns OFF Data Logging ON/OFF Press twice < 1 second apart and Data Logging LED turns ON/OFF Soft Reboot Press three…
