Yale 540F Series Manual, Installation Instructions

1, 540F and 580F Exit Device Trim Installation Instructions Series All dimensions are in inches (mm) unless otherwise noted. Attention Installer Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Yale Locks & Hardware makes no representations or warranties concerning what such impact may be in any specific situation. When retrof…

2, 2 Figure 2: Tailpiece Sizing Figure 1 Trim Mounting Surface NOTE: Measure from device mounting surface (door face or shim surface) Cut Line Hold 5/16 (8) Trim Tailpiece Device Mounting Surface (See Note) Device is bolted to trim using holes “A” (closest to door lock edge) (2) Screws and washers bolt trim to door using holes “B” Tailpiece (T) engages with cross hole of cam slot. Cut per Fig. 2 LHR Door Shown 1. …

3, Yale 540F Series 2-1/4" Door 2" Door 1-3/4" Door Figure 3b. Interchangeable Core Cylinders Trim levers are specific for the cylinder core used. Levers are not removable. To remove and install the cylinder use the control key supplied with the cylinder. Figure 3a. Lever Handle Removable 1. Insert key & rotate clockwise 45° 2. Depress retainer with tool supplied. 3. Slide lever off trim. (Reverse steps to re-assemble.) Lever Removable Tool Standard …

4, 4 Yale® registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication. Yale Security Inc. reserves the right to change availability of any item in this catalog, its design, construction, and/or its materials. Copyright © 20…