Casio Privia PX-5S Manual 

1, PX-5S MIDI Implementation CASIO COMPUTER CO., LTD. Contents I Overview 6 1 Product Configuration as a MIDI Device 6 1.1 System Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.2 Performance Controller Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.3 Sound Generator Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Timbre Type Speci…

66, Note1: For information about the relationship between setting values and send/receive values, see “33.4 –64 - 0 - +63 Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document. Note2: For information about the relationship between setting values and send/receive values, see “33.11 LFO Wave Form1 Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document. 32.7 Chorus Parameter Number Parame…

9, Note: This Instrument has a function that assumes connection of an external device that sends Note Off Velocity as a fixed value. Note Off Velocity 00H is replaced with 40H until a Note Off message with a Velocity value other than 00H is received. This function is enabled when the Instrument is turned on, and disabled by receipt of a Note Off message with a Velocity value other than 00H. 6 Note On Message Format: 9nH kkH vvH n: MIDI Channel Number kk: Key Number vv: Velocity Transmit Sent when s…

43, Casio Privia PX-5S 19.3.9 Example: Session Generating a Timeout Error Data Receiver Data Sender Operation (External Device) (This Instrument) SBS(HBR) -----> Session Start Request Interval *Note1 ERR(Time Out Error) -----> Timeout Error <----- ACK Acknowledge HBR -----> Send Request (Optional) <----- HBS Send Packet ACK -----> Acknowledge Interval *Note1 ERR(Time Out Error) -----> Timeout Error Interval *Note1 ERR(Time Out Error) -----> 2 consecutive timeout errors (Note2) <----- HBS Acknowledge Interva…

70, Note2: For information about the relationship between setting values and send/receive values, see “33.23 Delay Tempo Sync Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document. 32.20 Piano Effect Parameter Number Parameter Name Notes Parameter[1] Lid Type Note1 Parameter[2] Reflection Level Parameter[3] Input Level Parameter[4] Wet Level Parameter[5] Dry Level Note1: For information about the relationship be…

77, Casio Privia PX-5S 33.20 Pitch Setting Value Table Receive Value DSP Parameter Value Parameter(quarter tone) 00H - 01H 28H -24 02H - 04H 29H -23 05H - 06H 2AH -22 07H - 09H 2BH -21 0AH - 0CH 2CH -20 0DH - 0EH 2DH -19 0FH - 11H 2EH -18 12H - 13H 2FH -17 14H - 16H 30H -16 17H - 19H 31H -15 1AH - 1BH 32H -14 1CH - 1EH 33H -13 1FH - 20H 34H -12 21H - 23H 35H -11 24H - 26H 36H -10 27H - 28H 37H -9 29H - 2BH 38H -8 2CH - 2EH 39H -7 2FH - 30H 3AH -6 31H - 33H 3BH -5 34H - 35H 3CH -4 36H - 38H 3DH -3 39H - 3BH 3EH -2 3CH - 3DH 3FH -1 3EH …

7, Part number MIDI Receive Ch MIDI Transmit Ch Assigned Function(Note) 01 1 01 - 16 Song Sequencer/Zone 1/SMF play/MIDI IN 02 2 01 - 16 Song Sequencer/Zone 2/SMF play/MIDI IN 03 3 01 - 16 Song Sequencer/Zone 3/SMF play/MIDI IN 04 4 01 - 16 Song Sequencer/Zone 4/SMF play/MIDI IN 05 5 5 Song Sequencer/SMF play/MIDI IN 06 6 6 Song Sequencer/SMF play/MIDI IN 07 7 7 Song Sequencer/SMF play/MIDI IN 08 8 8 Song Sequencer/SMF play/MIDI IN 09 9 9 Song Sequencer/SMF play/MIDI IN 10 10 …

15, 7.18 Vibrato Depth (4DH) Message Format: BnH 4DH vvH n: MIDI Channel Number vv: Value (Note1) Note1: For information about the relationship between setting values and send/receive values, see the “33.4 –64 - 0 - +63 Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document. Receive Receipt changes the degree of pitch modulation. 7.19 Vibrato Delay (4EH) Message Format: BnH 4EH vvH n: MIDI Channel…

17, Casio Privia PX-5S Note1: For information about the relationship between setting values and send/receive values, see the “33.1 Off/On Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document. Transmit Sent when a mixer part on/off setting is changed. Receive Receipt changes the mixer part on/off setting. 7.25.2 Stage Setup Number Select Message Format: BnH 62H 00H BnH 63H 24H BnH 06H mmH BnH 26H llH n: MIDI Channel Number mm: Value (00H - 63H) ll: Transmit Sen…

73, 33.9 EQ Frequency Setting Value Table Receive Value DSP Parameter Value Parameter 00H - 05H 08H 100Hz 06H - 0BH 09H 125Hz 0CH - 12H 0AH 160Hz 13H - 18H 0BH 200Hz 19H - 1FH 0CH 250Hz 20H - 25H 0DH 315Hz 26H - 2BH 0EH 400Hz 2CH - 32H 0FH 500Hz 33H - 38H 10H 630Hz 39H - 3FH 11H 800Hz 40H - 45H 00H 1.0kHz 46H - 4BH 01H 1.3kHz 4CH - 52H 02H 1.6kHz 53H - 58H 03H 2.0kHz 59H - 5FH 04H 2.5kHz 60H - 65H 05H 3.2kHz 66H - 6BH 06H 4.0kHz 6CH - 72H 07H 5.0kHz 73H - 78H 12H 6.0kHz 79H - 7FH 13H 8.0…

13, 7.10 Portamento On/Off(41H) Message Format: BnH 41H vvH n: MIDI Channel Number vv: Value (Note1) Note1: For information about the relationship between setting values and send/receive values, see the “33.1 Off/On Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document. Receive Receipt changes the portamento on/off setting. 7.11 Sostenuto (42H) Message Format: BnH 42H vvH n: MIDI Channel Number vv: Value (Note1) Note1: For information abou…

37, Casio Privia PX-5S Table 1 7 6 5 4 3 2 1 0 Memory data 00: [00.7] [00.6] [00.5] [00.4] [00.3] [00.2] [00.1] [00.0] Memory data 01: [01.7] [01.6] [01.5] [01.4] [01.3] [01.2] [01.1] [01.0] Memory data 02: [02.7] [02.6] [02.5] [02.4] [02.3] [02.2] [02.1] [02.0] : Memory data 32: [32.7] [32.6] [32.5] [32.4] [32.3] [32.2] [32.1] [32.0] (Bit M of the NNth byte is indicated at [NN.M].) Table 2 7 6 5 4 3 2 1 0 Send data 00: 0 [00.6] [00.5] [00.4] [00.3] [00.2] [00.1] [00.0] Send data 01: 0 [01.5] [01.4] [01.3] [01.2] [01.1] [01.0] [00.7] Send data…

49, 21.2 System Version Information These are system version information parameters. Parameter ID R/W Block Size Array Min-Def-Max Description Release Version 0002 R 55-0:0 7 05 00-00-7F Release Version Number 21.3 Data Management Parameter These are information acquisition and operation command parameters for this Instrument’s Data Man- ager PC application. Parameter ID R/W Block Size Array Min-Def-Max Description Ps Cate…

51, Parameter ID R/W Block Size Array Min-Def-Max Description 1...1.3kHz 2...1.6kHz 3...2.0kHz 4...2.5kHz 5...3.2kHz 6...4.0kHz 7...5.0kHz 8...100Hz 9...125Hz 10...160Hz 11...200Hz 12...250Hz 13...315Hz 14...400Hz 15...500Hz 16...630Hz 17...800Hz 18...6.3kHz 19...8.0kHz Mid2 Gain 00A5 R/W 7 01 00-0C-18 -12 - 0 - +12 High Freq 00A6 R/W 7 01 00-02-09 0...6.0kHz 1...8.0kHz 2...10kHz 3...2.0kHz 4...2.5kHz 5...3.2kHz 6...4.0kHz 7...5.0kHz 8...13kHz 9...16kHz High Gain 00A7 R/W 7 01 00-0C-18 -12 - 0 - +12 In…

50, Parameter ID R/W Block Size Array Min-Def-Max Description Oneway Current Data Length 00BC R/W 14 01 0000-0080-3FFF Current memory size value (bytes) of transfer data included in one packet during One-way Bulk Dump send by Instrument Handshake Max Interval 00BD R/W 14 01 0000-0800-3FFF Maximum allowable message wait time (msec) during Handshake Bulk Dump receive by Instrument Handshake Max Data Length 00BE R 14 01 0000-0080-3FFF Maximum memory size value (bytes) of transfer data included in one packet durin…

42, Casio Privia PX-5S Data Receiver Data Sender Operation (External Device) (This Instrument) SBS(HBR) -----> Session Start Request <----- ACK Acknowledge HBR -----> Send Request (Start Sub Session) <----- HBS Send Packet ACK -----> Acknowledge <----- HBS Send Packet ACK -----> Acknowledge <----- HBS Send Packet ACK -----> Acknowledge : Send Other Packet : ACK -----> Acknowledge <----- ESS End Data (End Sub Session) : Other Sub Session : EBS -----> End o…

23, • Hex Layer This setting optimizes for hex layer tones. The damper pedal performs on/off operations. Stage Setup Number Switching by Bank Select Message and Program Change Message The bank select message and program change message can be used to switch the stage setup number. The change target can be switched by the bank select MSB. The change target is specified by the program change number. The bank select LSB is ignored. Change Target Bank Select MSB Stage …

27, 16.1.6 Chorus Type Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 02H 00H vvH F7H dd: Device ID vv: Value(Note1) Note1: For information about the relationship between setting values and send/receive values, see “33.8 Chorus Type Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document. Receive Receipt changes the chorus type. 16.1.7 Modulation Rate Message Format: F0H 7FH ddH 04H 05H 01H 01H 01H 01H 02H 01H vvH F7H dd: D…

31, 17.3.5 act : Action Format: 0aaaaaaaB This field indicates the operation of the Instrument-specific System Exclusive Message. aaaaaaaB Action Function 00H IPR Individual Parameter Request 01H IPS Individual Parameter Send 02H OBR One-way Bulk Parameter Set Request 03H OBS One-way Bulk Parameter Set Send 04H HBR Handshake Bulk Parameter Set Request 05H HBS Handshake Bulk Parameter Set Send 08H SBS Start of Bulk Dump Session Session 09H EXI Extend Interval 0AH ACK Acknowledg…

2, 7.19 Vibrato Delay (4EH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 7.20 Portamento Control(54H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 7.21 High Resolution Velocity Prefix (58H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 7.22 Reverb Send (5BH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 7.23 Chorus Send (5DH) . . . . . . . . . . . . . . . . . .…

40, 19.2.2 Example: Data send to Instrument from external device Data Sender Data Receiver Operation (External Device) (This Instrument) SBS(OBS) -----> Session Start Request Interval *Note OBS -----> Send Packet (Start Sub Session) Interval *Note OBS -----> Send Packet Interval *Note OBS -----> Send Packet Interval *Note : Send Other Packet : ESS -----> <----- ACK End Sub Session : Other Sub Session : EBS -----> End of Session Note: The interval is no less than Oneway Min Inter…

16, 7.22 Reverb Send (5BH) Message Format: BnH 5BH vvH n: MIDI Channel Number vv: Value Transmit Sent when the reverb send of any part is changed. Receive Receipt changes the reverb send of the corresponding part. 7.23 Chorus Send (5DH) Message Format: BnH 5DH vvH n: MIDI Channel Number vv: Value Transmit Sent when the chorus send of any part is changed. Receive Receipt changes the chorus send of the corresponding part. 7.24 Delay Send (5EH) Message Format: BnH 5EH vvH n: MIDI Channel Number vv: …

76, 33.17 Vibrato/Chorus Setting Value Table Receive Value DSP Parameter Value Parameter 00H - 11H 00H Off 12H - 23H 01H V1 24H - 35H 02H C1 36H - 48H 03H V2 49H - 5AH 04H C2 5BH - 6CH 05H V3 6DH - 7FH 06H C3 33.18 Routing Setting Value Table Receive Value DSP Parameter Value Parameter 00H - 1FH 00H Dist 20H - 3FH 01H Wah 40H - 5FH 02H Wah-Dist 60H - 7FH 03H Dist-Wah 33.19 Amp Setting Value Table Receive Value DSP Parameter Value Parameter 00H - 0BH 00H Bypass 0CH - 18H 01H TComb…

12, Casio Privia PX-5S Received values and parameter setting values The range of the value of each DSP Parameter 7 array element depends on the selected DSP or array number. Unlike manipulation of a DSP parameter using a System Exclusive Message, a value received by this control change message is always in the range of 0 to 127, but the range is changed in accordance with the setting range of the applicable parameter setting. Because of this, it is imp ossible for a value to be outside of the range. Conversion to the parameter setting value from the value rec…

8, Part II Channel Message MIDI Message Send by Controller These MIDI messages can be sent by assigning any control change from CC:00H to CC:65H, after touch, etc. to a controller (knob, slider, pedal, modulation, etc.) See the Instruments User’s Guide for details. Instrument Velocity Resolution The upper seven bits of the 14-bit resolution correspond to the Note On/Off message, while the lower seven bits correspond to the High Resolut…

10, Casio Privia PX-5S Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the tone is not actually changed until a Program Change message is received. For details, see “8 Program Change”. The stage setup number can also be changed by the bank program. For details, see ”8 Stage Setup Numb er Switching by Bank Select Message and Program Change Message”. For details about stage setups, see the Instrument’s User’s Guide. 7.2 Modulation …

36, Casio Privia PX-5S • Data = 3 : Start HBS Session Start session to send data using handshake protocol. If a device that receives this message accepts the session, it needs to return ACK. ERR (Error) Format: 0eeeeeeeB The relationship between the data value and error 0eeeeeeeB is defined as shown below. • Data = 0 : Time Out Error This error message is generated when a preset amount of time elapses without a receiving device receiving an expected message. This error is also generated when a…

53, Casio Privia PX-5S Parameter ID R/W Block Size Array Min-Def-Max Description 4...1/2 5...2/3 6...3/4 7...1 8...4/3 9...3/2 10...2 22.8 System Reverb Parameter These parameters are for configuring system reverb settings. Parameter ID R/W Block Size Array Min-Def-Max Description Type 0080 R/W 55-0:0 7 01 00-02-03 0...Room 1...Hall1 2...Hall2 3...Plate Time 0081 R/W 7 01 00-40-7F 0 - 127 Early Reflection 0082 R/W 7 01 00-40-7F 0 - 127 High Damp 0083 R/W 7 01…

68, Note3: For information about the relationship between setting values and send/receive values, see “33.17 Vibrato/Chorus Setting Value Table” in “VIII Setting Values and Send/Receive Values” of this document. 32.13 LFO Wah Parameter Number Parameter Name Notes Parameter[1] Input Level Parameter[2] Resonance Parameter[3] Manual Parameter[4] LFO Rate Parameter[5] LFO Depth Parameter[6] LFO Waveform Note1 Parameter[7] Wet Level Parameter[8] Dry Level Note1: For infor…