CHIEF ECRR Series Installation Instructions Manual

1, INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation Elite Converta Rack Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description ECRR Series …

2, ECRR Series Installation Instructions 2 DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligat…

3, Installation Instructions ECRR Series 3 DIMENSIONS "D" "E" MODEL RACK HEIGHT "A" OVERALL DEPTH "B" USEABLE DEPTH ECRR-12-20WT 12 20.0 [508mm] 16.0 [406mm] 20.6 [524mm] 23.9 [606mm] 26 [659mm] ECRR-16-20CH 16 20.0 [508mm] 16.0 [406mm] 20.6 [524mm] 30.9 [785mm] 33 [838mm] ECRR-16-20WT 16 20.0 [508mm] 16.0 [406mm] 20.6 [524mm] 30.9 [785mm] 33 [838mm] …

4, CHIEF ECRR Series ECRR Series Installation Instructions 4 TOOLS REQUIRED FOR INSTALLATION PARTS #2 A (1) [left side panel] B (1) C (1) [rack top] [right side panel] Q (2) M7x70mm R (28) 5/8" T (2) [cap] D (1) [rack bottom] E (2) [rack rail] (12-space shown) H (1) [round grommet] J (2) F (1) [back support] [brass hinge] L (2) [bookcase stud] M (14) [cam] N (4) [caster] P (2) [clip-on hinge] G (6) #5 X 3/8" U (2) [mounting plate] V (14) [c…

5, Installation Instructions ECRR Series 5 ASSEMBLY 1. Use four #10 x 5/8" wood screws (R) to secure two rack rails (E) to two side panels (A and B). (See Figure 1) Figure 1 2. Screw seven connecting bolts (V) into each side panel (A and B). (See Figure 2) Figure 2 3. Install six cams (M) into holes on rack top (C) and rack bottom (D). (See Figure 3) 4. Install two cams (M) into holes on back support (F). (See Figure 3) Figure 3 5. Place one side p…

6, CHIEF ECRR Series ECRR Series Installation Instructions 6 10. Use two M7x70mm confirmat screws (Q) to secure back support (F) to rack bottom (D). (See Figure 5) 11. Press two caps (T) onto two confirmat screws (Q). (See Figure 5) Figure 5 12. Use two #10- x 5/8" wood screws (R) to secure each brass hinge (J) to side panel (A or B). (See Figure 6) NOTE: Door can be attached to either side panel based on user preference. Figure 6 13. Slide front door (W) into brass hinges (J). (See Figure 7) 14. Tighten screws on brass hinges (J) to secure …

7, Installation Instructions ECRR Series 7 17. Use pre-installed screws to attach two mounting plates (U) to side panel where door hinges will be installed. (See Figure 9) 18. Use two #10 x 5/8" wood screws (R) to attach strike plate (K) to opposite side panel. (See Figure 9) Figure 9 19. Connect clip-on hinges (P) to mounting plates (U) by following these three steps: • a. Place hinge on mounting plate making sure front tabs latch onto front end of plate. (See Fig…

8, ECRR Series Installation Instructions USA/International A 6436 City West Parkway, Eden Prairie, MN 55344 P 800.582.6480 / 952.225.6000 F 877.894.6918 / 952.894.6918 Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Asia Pacific A Office No. 1 on 12/F, Shatin Galleria 18-24 Shan Mei Street Fotan, Shatin, Hong Kong P 852 2145 4099 F 852 2145 4477 Chief Manufacturing, a products division of Milestone AV Technologies 8800-002327 Rev00 2013 Milestone AV Technologies, a Du…