cinetto PS40.3 Assembly Instructions Manual

36, 36 Configurazioni armadio Wardrobe configurations Configuration armoire Schrank konfiguration Configuración del armario 1 1 1 4 2 3 A E F 37 41 45 …

34, 27 4 mm -4 +6 mm Verificare l’allineamento e la distanza centrale delle ante agendo eventualmente sui fermi superiori. Check the vertical alignment and the central distance between the doors, eventually move the upper Left or Right locks. Vérifier l’alignement et la distance centrale des portes en agissant éventuellement sur les butées supérieures. Überprüfen Sie die Ausrichtung der Türen und der Abstand zwischen die 2 Türe und eventuel bewegen Sie…

23, 12 23 13 Chiudere il meccanismo superiore destro prima di fissare il sistema B-moved. Close the right upper slide before fixing the B-moved system. Fermer le mécanisme supérieur droite avant de Fixer le système B-moved. Schließen Sie den rechten oberen Laufwerk, bevor Sie das B-moved System befestigen. Cierre el mecanismo superior derecho antes de fijar el sistema B-moved. …

22, 22 11 Chiudere il meccanismo superiore sinistro prima di fissare il sistema B-moved. Close the left upper slide before fixing the B-moved system. Fermer le mécanisme supérieur gauche avant de Fixer le système B-moved. Schließen Sie den linken oberen Laufwerk, bevor Sie das B-moved System befestigen. Cierre el mecanismo superior izquierdo antes de fijar el sistema B-moved. 70 …

15, cinetto PS40.3 PS40.2 PS40.1 PS40.1 Istruzioni di montaggio Assembly instructions Instructions de montage Montageanleitungen Instrucciones de ensamblaje 1 2 15 …

10, cinetto PS40.3 1a 16 9 128 196 128 125 WA = 888 ÷ 918 = = 51 86,5 128 9 128 86,5 16 32 128 51 12 12 32 128 L RED 52 Lavorazioni richieste per le ante Working requests for the doors Usinage nécessaire pour les portes Verarbeitungsanforderungen für die Türen Laboreo necesario para las puertas 10 …

53, 1 Initial condition of the wardrobe Do not plug the control unit to electricity before connecting all the engines. Connect all the electric motors of the transmission bars to the control unit according to the wardrobe configuration. After connecting all the electric motors to the control unit close manually all the doors. 2 Control unit power supply After connecting all the electric motors to the control unit and after closing manually all the doors is pos - sible to connect the control unit to the power supply. After …

55, 6 General check of the system Check that the movement of the doors work properly. Check the safety system against accidental crush, putting an obstacle between the door while closing and the side of the furniture. Make this check to prevent danger or damage determined by a wrong operation of the system. O I SOURCE DEVICE DEVICE 0 - 48V MAX 2A N/O SWITCH SOURCE DEVICE DEVICEDEVICE 0 - 48 N/O SWITCH …

26, 26 d = WA / 2 – S – 400 R S d S d = WA / 2 – S – 400 L S S d Posizionamento e fissaggio dei fermi inferiori. Positioning and fixing of the lower locks. Positionnement et fixation des supports inférieurs. Positionierung und Befestigung der unteren Aufschläge. Posicionamiento y fijación de los topes inferiores. …

6, 1 51 19 90 90308 90 163 MIN – MAX = = 32 68,5 90 19 90 68,5 R4 51 90 32 R4 12 51 12 19 3 Lavorazioni richieste per le ante Working requests for the doors Usinage nécessaire pour les portes Verarbeitungsanforderungen für die Türen Laboreo necesario para las puertas Il riferimento iniziale per effettuare le fresature è sempre il centro dell’anta, qualsiasi sia la sua larghezza. The starting reference for making the milling / …

35, 35 8 mm Agganciare il pattino inferiore all’anta e bloccare le viti. Hook the lower slide and fix the screws. Accrocher le patin inférieur à la porte et fixer les vis. Anhaken die untere Fuehrung an der Tür und die Schraube befestigen. Enganchar el patin inferior a la puerta y fijar el tornillo. 8 mm 28b 29 …