-
1, Nubert nuPro X-6000 RC 17 Wireless Active Speakers Safety instructions Operating manual Technical data Warranty terms nuPro X-6000 RC If you have any questions or problems with the commissioning of your Nubert system, please feel free to contact our service team. Please have your customer number ready. The latest manuals and other helpful information can be found here: www.nubert.de/downloads/61/ Telefon: +49 (0)7171 87120 E-Mail: [email protected]
…
-
2, Device approval and conformity with EC directives Nubert electronic GmbH hereby declares that this product complies with the 2014/53/EU directives, provided that it is installed and used in accordance with the manufacturer‘s instructions. The full text of the EU Declaration of Conformity is available at the following Internet address: https://www.nubert.de/konformitaetserklaerungen/716/ • Do not change the serial number on the speaker. It is part of the operating approval. • If the loudspeaker is repaired or m…
-
3, Danger of electric shock! The loudspeaker carries mains voltage and voltages higher than 35 V AC or DC inside. It has no special protection against the intrusion of liquids or objects into the system. There is therefore a risk of lethal electric shock. • Never touch the speaker with wet hands! • Only use the speaker in a dry place! • Do not operate it outdoors or in damp rooms! • The loudspeaker must be protected from liquids of all kinds, including dripping and splashing water. • Do not p…
-
4, 44 Unpacking and Scope of Delivery Unpacking Avoid using sharp or pointed objects when unpacking your speak- ers. Please keep the packaging in a safe place in case you need to transport the speaker at a later date. Scope of delivery If the delivery is complete, it contains the following parts: • 1 nuPro active loudspeaker • 1 Cloth grille • 2 Out-rigger feet • 1 Mounting kit (4 bolts, 1 hex key) • 1 Remote control with battery • 1 Mains cable, 5 m • 1 HDMI ARC adapter • 4 Signal cables: – SPDIF coa…
-
5, 5 Setup The nuPro X are high-quality, very neutral active stereo loudspeak- ers. They impress with an extremely homogeneous, precise, and “direct” sound reproduction with the nest resolution in the entire frequency spectrum. However, even “honest loudspeakers” are exposed to the manifold inuences of room acoustics. In order to achieve the most natural and true-to-life reproduction possible, please observe the following genera…
-
6, AUX input Master speaker box: Source device with analog line output, for example • CD player • various network players • Preamplier or AV receiver • Smartphones, tablets and MP3 players with 3.5 mm jack headphone jack • PCs/laptops and TVs with 3.5 mm jack headphone jack. USB Optical 2 SERVICE (only for Nubert Service) Digital Digital Port 5 V 1,5 A SUB output Master loudspeaker box: Connection of an active sub- woofer XLR/AES input Master speaker system: …
-
7, USB-connection to a computer Select the USB input on the nuPro master-loudspeaker. Windows 10 / 11 Automatic Installation Connect the master speaker to your computer with a suitable USB cable (included) and switch on the loudspeaker. Normally, Win- dows will automatically install the correct driver and set the spea- ker as the default playback device. Selecting the playback device manually If the loudspeakers are not set as the standard playback device automatically or if you want to select a different playback device, open …
-
8, The remote control of the nuPro allows direct access to the perma- nently required functions: on/off After switching on the loudspeaker, using the mains-switch on the back of the speaker, the nuPro is in stand-by or auto-on mode. Use the power key on the remote control to activate or deactivate the speaker. Switching the speaker into standby using the app or the remote control deactivates the automatic power-on feature. volume and x (mute) keys The volume can be adjusted with the volume keys. The mute x key allows you to mute and unmute…
-
9, Nubert nuPro X-6000 RC Conguring a stereo pair All nuPro X loudspeakers have the same functions and the con- nections. Depending on placement and usage, congure your loud- speakers in one of the following ways. Note: Always connect your sources to the master loudspeaker when using master/slave congurations! All settings are performed on the master loudspeaker using the control pad. Default setting: Cabled connection, left speaker …
-
10, Pressing in the volume menu will access the main menu. Pressing this key will always take you back to a higher menu level. By pressing or you can access the different menus and change their settings. By pressing you will enter a sub-menu. Pressing the key in the middle will conrm a selection you have made or conrm the choice of a sub-menu. If the loudspeaker is standby mode, you can activate it by k…
-
11, Nubert nuPro X-6000 RC These settings allow to select the mode of operation. If you want to congure each loudspeaker individually, select single. You now have complete access to all conguration options. The standby power consumption in single mode is < 1 watt. If you want use your nuPros as a stereo pair using a wired a connection, select pair on both loudspeakers. This is the default setting. The standby power consumption in p…
-
12, Nubert nuPro X-6000 RC >O< >< preset >O< >< default >O< >< preset 1 >O< >< default to factory setting? Here you can recall a previously saved preset by selecting preset 1, 2 or 3 and conrm with the key. To save a preset, select save as. Choose in which of the three memories you wish to save your settings, using the or keys and conrm with the key. All settings in the menu sound, system hp, subwoofer, analog gain and the (de-)activation of the X-Room Calibration a…
-
13, Nubert nuPro X-6000 RC 20 50 100 200 500 1k 2k 5k 10k 20 k Frequency (Hz) -10 -20 -30 -40 -50 -60 Volume controller setting [dB] Construction and technology Tilt Control The midrange/treble adjustment of the nuPro loudspeakers has the characteristics of a so-called “Tilt control”. While standard treble con- trols “bend” the frequency response and thus produce colourations, this contr…
-
14, Further Applications Connecting a subwoofer If you wish to connect a subwoofer to your nuPros, you have two options: You can connect your subwoofer at the SUB-output of the Master loudspeaker. This output outputs a lowpassed, summed mono sig- nal. You can set the crossover-frequency in the advanced / sub- woofer menu. Alternatively, you can connect a subwoofer, e.g. from our nuSub series, wirelessly by connecting it as a wls slave. Because the…
-
15, Care and cleaning tips Caution! Improper handling of the speaker may result in damage. • Always unplug the speaker before cleaning it! • Before recommissioning, make sure that all connections are cor- rect, that there are no short circuits and that the speaker is com- pletely dry. • Never use strong cleaning agents or solvents such as petrol, spir- it or similar! Enclosure We recommend commercial window cleaner sprayed onto a cotton cloth. This allows alm…
-
16, 1.1. Nubert (Nubert electronic GmbH, Goethestraße 69, 73525 Schwäbisch Gmünd, Germany) grants a special manufacturer‘s warranty to the purchaser on certain prod- ucts of the Nubert brand, for which we state this in the offers or in the corresponding product documents, or for which these warranty conditions are enclosed with the delivery, according to the following conditions. For products of other manufacturers a…
