-
1, Toa IR-200M OPERATING INSTRUCTIONS INFRARED WIRELESS MICROPHONES IR-200M IR-300M IR-200M IR-300M Thank you for purchasing TOA's Infrared Wireless Microphone. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
…
-
2, 2 TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ................................................................................. 3 2. GENERAL DESCRIPTION .............................................................................. 4 3. FEATURES ........................................................................................................... 4 4. HANDLING PRECAUTIONS ....................................................................…
-
3, Toa IR-200M 3 When the Unit is in Use • Use TOA's IR-200BC Battery Charger when recharging. The infrared wireless microphone can be powered by optionally available nickel metal hydride (NiMH) batteries. The use of any other than the specified charger could result in fire, personal injury or environmental contamination due to battery rupture or leakage. • Stop charging if the batteries are not fully charged with…
-
4, Toa IR-200M 4 2. GENERAL DESCRIPTION The IR-200M (hand-held type) and IR-300M (hands-free type) infrared wireless microphones are intended for speech applications and use unidirectional electret condenser microphone units featuring high sensitivity and clear sound. 3. FEATURES • Employs the PLL synthesizer system, allowing up to 6 different frequencies to be set. • Powered by 2 IR-200BT rechargeable NiMH batteries or 2 AA alkaline batteries. Note It is recommended that the micr…
-
5, 5 [Inside the battery case] [Front] [Side] 7 8 2 3 3 4 5 6 1 5. NOMENCLATURE AND FUNCTIONS 5.1. IR-200M 1. Power switch Turns on and off the microphone. 2. Battery indicator Lights when the power switch (1) is turned on. Continuously lights green while the battery is fully charged, and gradually changes to red as the battery becomes weaker. 3. Infrared emitter Emits the infrared beam for communications. 4. Battery case Co…
-
6, 6 5.2. IR-300M 1. Power switch / battery indicator Turns on or off the microphone. Turning on this switch causes its indicator to come on, allowing it to also function as a battery indicator. This switch continuously lights green while the battery is fully charged, and gradually changes to red as the battery becomes weaker. 2. External microphone input terminal [MIC] Used to connect a headset microphone or other external microphone. 3. Infrared emitter Transmits t…
-
7, 7 Step 1. Set the power switch to the OFF position. Step 2. Remove the battery case (IR-200M) or battery cover (IR-300M). [IR-200M] Rotate the battery case counterclockwise. [IR-300M] Slide the battery cover in the direction of the arrow while pressing the arrow portion. Step 3. Insert 2 IR-200BT rechargeable NiMH batteries or 2 AA alkaline batteries, noting correct polarities (+ and –) indicated in the battery compartment. S…
-
8, Notes • When operating on rechargeable batteries, the optional IR-200BC Battery Charger is required. • For rechargeable batteries, be sure to use the optional IR-200BT battery. Do not use other batteries. 7.1. How to Charge Step 1. Set the infrared wireless microphone's power switch to the OFF position. Note Be sure to turn off the microphone's power switch when charging. Batteries cannot…
-
9, 9 8. WHEN USING DRY CELL BATTERIES [IR-200M's front view] [IR-300M's top view] Battery indicator Battery indicator The battery indicator continuously lights green while the battery is fully charged, and gradually changes to red as the battery becomes weaker. Change the battery with a new one when the indicator lights red. [Guidelines on the AA alkaline dry cell battery's operation time] Power selector switch* position * Refer to p…
-
10, 10 10. INFRARED WIRELESS MICROPHONE USAGE TIPS 10.1. When Holding the Microphone or Suspending It From the Neck Note Do not cover the infrared wireless microphone's infrared emitter with the hand or hide the microphone by placing it inside clothes. Covering the infrared emitter will disable light transmission. [Hand-held type] Hold the infrared microphone so that its power switch faces the user and it…
-
11, 11 11. CHANNEL SETTINGS Notes • Make sure that the infrared wireless microphone channel is identical to that of the infrared wireless tuner. If the channels are different, microphone signals cannot be tuned. • If the channel switch pointer is incorrectly set, such as between 2 numbers resulting in no indication, the battery indicator will alternately flash green and red to indicate irregularities. Confirm the channel selector switch position and set it correctly. [IR…
-
12, 12 12. ABOUT THE POWER SELECTOR SWITCH Transmission output can be switched in 2 steps: Normal (Power selector switch position: N) and High (switch position: H). Set the switch position depending on the continuous usage time* 1 , battery service life and usage conditions* 2 . Note: The power selector switch is set to the N position by default. * 1 For continuous usage time by the power selector switch settings, refer to p. 8 "Guidelines on the rechargeable battery&…
-
13, 13 14. DIMENSIONAL DIAGRAMS 14.1. IR-200M 45.2 (1.78) ø28.2 (ø1.11) ø37 (1.46) 241.8 (9.52) [Front] [Side] [Rear] 14.2. IR-300M 64 (2.52) 91.3 (3.59) Approx. 500 (19.69) [Front] 25 (0.98) 27.3 (1.07) [Top] [Side] [Rear] Unit: mm (inches)
…
-
14, • Charge using the IR-200BC Battery Charger. [Operating on dry cell batteries] • Battery polarities not correct. • Batteries exhausted. 14 15. TROUBLESHOOTING Symptom Possible cause Remedy Battery indicator does not light even if the power switch is turned on. [Operating on rechargeable batteries] • Battery polarities not correct. • Specified battery not used. • Battery not charged. • Reinsert batteries correctly. • Replace the batteries with the IR- 200BT rechargeable b…
-
15, 15 16. SPECIFICATIONS 16.1. IR-200M Note: The design and specifications are subject to change without notice for improvement. • Accessories Screwdriver (for setting) ............................. 1 Color label (6 colors) .................................. 1 • Optional products Battery Charger : IR-200BC Rechargeable battery: IR-200BT-2 (containing 2 pieces) Battery IR-200BT rechargeable battery for the infrared wireless microphone (2 pieces) or AA alka…
-
16, 133-07-274-90 URL: http://www.toa.jp/ 16.2. IR-300M Note: The design and specifications are subject to change without notice for improvement. • Accessories Screwdriver (for setting) ............................. 1 Color label (6 colors) .................................. 1 • Optional products Battery Charger : IR-200BC Rechargeable battery: IR-200BT-2 (containing 2 pieces) Battery IR-200BT rechargeable battery for the infrared w…
