GoVideo DV3140 Operation & User’s Manual

16, GoVideo DV3140 16 VCR Operation Setup (Continued) Setting the Clock The DVD+VCR gives you two ways to set the time and date: the Auto Clock Feature or manually. The Auto Clock Feature enables the DVD+VCR to set the clock when the DVD+VCR is turned off. Auto Clock Set The Auto Clock Set feature is set to ON at the factory. In the ON setting, the DVD+VCR looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. …

9, GoVideo DV3140 9 INTRODUCTION Remote Control ote The remote control uses one set of playback buttons to operate both decks: To use the VCR, first press the VCR button. To use the DVD, first press the DVD button. DVD & VCR select buttons Sets the remote control to operate either the DVD deck or the VCR deck. POWER Turns the DVD+VCR ON and OFF. TV/VCR Switches between your TV tuner and the DVD+VCR tuner. DISPLAY, CLK/CTR Accesses the on-screen display. Switches among the clock, tape counter and tape remaining modes on the display. b/B/v/V…

18, GoVideo DV3140 18 DVD Operation Setup (Continued) Initial Settings In this menu system, there are several ways to cus- tomize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings. If you press SETUP, only the first level of the menu system will appear on the TV screen. The second and third level can be displayed by pressing B. For navigating the menu levels, you will see “ B “…

40, GoVideo DV3140 Who Provides the Limited Warranty During the warranty period, the GoVideo Warranty Administrator will honor service for 90 days labor, 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. Remote controls are warrantied for 90 days from the date of purchase. Who is Protected This warranty protects the original consumer owner of this GoVideo product. What is Covered and How Long This warranty covers internal …

24, GoVideo DV3140 24 Operation with tape (Continued) Instant Timer Recording Instant Timer Recording allows you to make a recording easily of a preset length without using the program timer. Preparation:  Turn on the power of both the DVD+VCR and the TV.  Be sure the TV is tuned to the DVD+VCR output channel (3 or 4).  If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. 11 Insert a video cassette with the safety tab…

11, 11 PREPARATION Connections Tips  Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD+VCR. Use connections described on pages 11-13.  Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.  For better sound reproduction, connect the DVD+VCR’s DVD/VCR AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See Optional, Preferre…

33, 33 Programmed Playback WMA MP3CD Programmed Playback with Audio CD and MP3/WMA Discs The Program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 99 tracks (Audio CD) or 300 tracks (MP3/WMA). 11 Insert an Audio CD or MP3/WMA disc. Audio CD or MP3/WMA menu will appear. 22 Press vVbBto select a track on the List. 33 Press PROGRAM. Or, press vVbBto highlight the “Ad…

20, 20 DVD Operation Setup (Continued) LOCK Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are differ- ent in each country. The Parental Control feature allows you to …

38, 38 Country Code List Country Code Afghanistan AF Albania AL Algeria DZ American Samoa AS Andorra AD Angola AO Anguilla AI Antarctica AQ Antigua and Barbuda AG Argentina AR Armenia AM Aruba AW Australia AU Austria AT Azerbaidjan AZ Bahamas BS Bahrain BH Bangladesh BD Barbados BB Belarus BY Belgium BE Belize BZ Benin BJ Bermuda BM Bhutan BT Bolivia BO Bosnia-Herzegovina BA Botswana BW Bouvet Island BV Brazil BR British Indian Ocean Territory IO Brunei Darussalam BN Bulgaria BG Burkina Faso BF Burund…

10, 10 Rear Panel Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, Another VCR). ANT.IN (ANTENNA INPUT) Connect the VHF/UHF/CATV antenna to this terminal. DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. AUDIO OUT (Left/Right) (DVD OUT) Connect to a TV, amplifier, receiver, or…

2, GoVideo DV3140 2 Safety Precautions This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: Do not i…

34, Troubleshooting 34 Symptom No power. The power is on, but the DVD+VCR does not work. No picture. No sound. The playback picture is poor. The DVD+VCR does not start playback. The remote control does not work properly. Cause  The power cord is disconnected.  No disc is inserted.  No tape is inserted.  The TV is not set to receive DVD+VCR signal output.  TV/VCR mode for DVD+VCR is set to TV.  The video cable is not connected securely.  The connected TV power is turned off.  The equipment connected wi…

19, 19 PREPARATION DVD Operation Setup (Continued) AUDIO Each DVD disc has a variety of audio output options. Set the player’s Audio Output according to the type of audio system you use. Dolby Digital Bitstream: Select “Bitstream” if you connected the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). PCM: Select when connected to a two-channel digital stereo ampl…

6, 6 Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the…

35, 35 Troubleshooting (Continued) REFERENCE Symptom Some channels are skipped over when using CH (v/V) Picture and sound of broadcasting channel are weak or missing. Camcorder image is not shown. Camcorder image via A/V input to DVD+VCR is not shown on TV screen. Timer recording is not possible. indicator appears after DVD+VCR is turned off. Stereo Audio Record and/or Playback is not present. The "PROGRESSIVE SCAN MODE" mes- sage re…

32, Operation with Photo Disc Viewing a Photo Disc This DVD+VCR can play discs with JPEG files. Before playing JPEG recordings, read the "Notes on JPEG Recordings" at right. 11 Insert a disc and close the tray. The JPEG menu appears on the TV screen. 22 Press v/V to select a folder then press ENTER. A list of files in the folder appears. Tip  If you are in a file list and want to return to the Folder list, use the v/V buttons on the remote to highlight “ ” an…

21, 21 Operation with tape OPERATION Normal Playback Preparation:  Turn on the TV.  Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO.  If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO.  Set the Output Source to VCR as shown in “Setting the Output Source” on page 6. 11 Insert a prerecorded video cassette. The indicator will ligh…

4, 4 Table of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Notes on Discs . . . . . . . . . . . . . . …

27, 27 OPERATION Operation with DVD Playing DVD Playback Setup  Turn on the TV and select the video input source con- nected to the DVD+VCR.  Audio system: Turn on the audio system and select the input source connected to the DVD+VCR.  Set the Output Source to DVD as shown in “Setting the Output Source” on page 6. 11 Press OPEN/CLOSE ( ZZ ) to open the disc tray. 22 Load your chosen disc in the tray, with the playback side down. 33 Press OPEN/CLOSE ( ZZ ) to close the tray. Playback starts automatically. If playback does not…

8, GoVideo DV3140 8 Display Window DVD VCR REC PM TV [P] A timer recording is programmed or in progress (VCR deck only). A cassette is in the VCR deck. The VCR deck is selected. DVD+VCR is Recording. (VCR deck only) Indicates PM time. (AM is not displayed.) Lights when TV mode is active (See page 22.) Lights when a disc is loaded in the DVD deck. Flashes when there is no disc. Indicates when Progressive scan is active. Indicates when the DVD+VCR is locked. Indicates total playing time, elapsed time, remaining time or current de…

12, 12 Connections (Continued) Basic TV Connections  Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied 75-ohm Coaxial Cable (R). ote If you use this connection, tune the TV to the DVD+VCR’s RF output channel (CH 3 or 4). How to set the DVD+VCR’s RF output channel 1. Set the TV to the VCR channel (3 or 4) depending upon the selected channel. 2…

37, 37 REFERENCE Language Code List Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Amharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali; Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byelorussian 6669 Cambodian 7577 Catalan 6765 Chinese 9072 Corsican 6779 Croatian 7282 Czech 6783 Danish 6865 Dutch 7876 English 6978 Esperanto 6979 Estonian 6984 Faeroese 7079 Lan…

23, GoVideo DV3140 23 OPERATION Operation with tape (Continued) 1100 Use VV to choose the SPEED option. Use bb / BB to choose the desired recording speed (AUTO, SP or SLP).  AUTO mode determines how long tape is left and switches speed from SP to SLP, if necessary, to complete recording the program. There will be some picture and sound distortion at the point of the speed change. 1111 Use VV to choose the REPEAT option. Use bb / BB to choose the …

25, 25 OPERATION Operation with tape (Continued) VHS Hi-Fi Stereo System/ MTS Broadcast This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The informa- tion below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode. Playback with Hi-Fi Stereo Audio Sound A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for correct stereo playback. To expe…

5, 5 INTRODUCTION Before Use Playable Discs DVD 3 inch/5 inch (8 cm/12 cm) disc Audio CD 3 inch/5 inch (8 cm/12 cm) disc In addition, this unit can play a CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. otes zz Depending on the conditions of the recording equip- ment or the CD-R/RW disc itself, some CD-R/RW discs cannot be played on the unit. zz The unit cannot play discs that contain data other than MP3/WMA and CD-DA data. zz Do not attach any seal or lab…

39, 39 REFERENCE Specifications General Power requirements AC 120V , 60 Hz Power consumption 21W Dimensions (approx.) 430 X 78.5 X 273 mm (16.9 x 3.1 x 10.8 inches) (w x h x d) Mass (approx.) 4.0 kg (8.82 lbs) Operating temperature 5˚C to 40˚C (41˚F to 104˚F) Operating humidity 5 % to 90 % Signal system NTSC Inputs ANTENNA IN 75 ohms (VHF/UHF/CATV) VHS VIDEO IN 1 Vp-p 75 ohms, sync negative, RCA jack x 2 VHS AUDIO IN -6.0 dBm more than 47 kohms, RCA jack (L, R) x 2 Outputs VIDEO OUT 1 Vp-p 75…

3, 3 INTRODUCTION IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. - All these safety and oper- ating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future refer- ence. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. Follow all instructions. - All operating and use instructions should be followed. 5. Do…

22, 22 Operation with tape (Continued) Normal Recording Preparation:  Turn on the power of both the DVD+VCR and TV.  Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO.  If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. 11 Insert a video cassette that the safety tab intact. 22 Select the desired channel by using CH ( vv /…

31, GoVideo DV3140 31 OPERATION Operation with Audio CD and MP3/WMA Discs (Continued) Pause 1 Press PAUSE/STEP (X) during playback. 2 To return to playback, press PLAY ( N ) or press PAUSE/STEP (X) again. Moving to another Track  Press BACKWARD (.) or FORWARD (>) briefly during playback to go to the next track or to return to the beginning of the current track.  Press BACKWARD (.) twice briefly to step back to the previous track.  To go directly to any track, enter the track number us…

28, 28 Operation with DVD (Continued) General Features (Continued) Repeat DVD Video Discs - Repeat Chapter/Title/Off 1 To repeat the currently playing chapter, press REPEAT. The Repeat Chapter icon appears on the TV screen. 2 To repeat the title currently playing, press REPEAT a second time. The Repeat Title icon appears on the TV screen. 3 To exit Repeat mode, press REPEAT a third time. The Repeat Off icon appears on th…