Planet ENW-9503A Operation & User’s Manual

1, Planet ENW-9503A User’s Manual ENW-9503A / ENW-9504 10/100 Mbps Fast Ethernet PCI Adapter 1 …

2, Copyright Copyright © PLANET Technology Corp. 2011. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET. PLANET makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warran…

3, Table of Contents UCHAPTER 1U UINTRODUCTIONU............................................................................................. 1 U1.1 Package ContentU........................................................................................................... 1 U1.2 FeaturesU ......................................................................................................................... 1 U1.3 Gathering Tools and DocumentationsU .............................…

4, 0BChapter 1 Introduction PLANET's ENW-9503A is 10/100Mbps based 32-bit Peripheral Component Interconnect (PCI) Local Bus Ethernet adapter designed to address high-performance system application requirements. The bus-master architecture provides high data throughput in the system and low CPU and system bus utilization. The adapter provides Auto-Negotiation automatically detects and determines the optimal inter-operation mode with other devices. The ENW-9503A support both 10Mbps and 100Mbps data rates with UTP-CAT5 or STP cable. LED in…

5, Planet ENW-9503A 1BChapter 2 Hardware Installation 8B2.1 LED definitions The faceplate of ENW-9503A / 9504 has two LED indicators: LINK and ACT. The pictures below have showed the faceplate of ENW-9503A / 9504. Table 2-1 explains the function and state of the LED. Faceplate of ENW-9503A / 9504 LED Color Description On: Indicate the card is connecting to LAN. LNK / ACT Green Off: Indicate the card is not connecting to LAN. Table 2-1 Descriptions of ENW-9503A / 9504 LED 2 …

6, Planet ENW-9503A 9B2.2 Hardware Installation Step 1: Please turn off your PC. Step 2: Remove any metal decorations from your hands and wrists. Step 3: Remove the cover from your PC. Step 4: Locate an empty PCI Express slot and remove the corresponding back plate. Save the screw for use in Step 6. Step 5: Carefully insert the adapter into the chosen slot and press firmly with proper push to ensure it is fully seated in the slot. Step 6: Secure the adapter with the screw you saved in step 4. Step 7: Replace the PC cover.…

7, 2BChapter 3 Driver Installation A device driver must be installed before your ENW-9503A/9801 can be used with your computer. This chapter describes how to install the driver for various operating systems. Before you begin the driver installation process, make sure you have the installation disks for your computer’s operation system. 10B3.1 Installing Driver to Windows Server 2003 / 2003R2 / XP The following install…

8, 5. Win2003R2 will show you this dialog box to prompt you the driver is not digitally signed by Microsoft, please press “Continue Anyway” to continue. 5 …

9, 6. Please click “Finish” to complete the driver installation. 11B3.2 Install Driver To Other Operating Systems When you want to install ENW-9503A/ ENW-9504 to other OS, you can refer to the Readme.txt in each driver folder and follow the installation to install ENW-9503A/ ENW-9504 to the operating system you are using. 6 …

10, 3BChapter 4 Advance Feature This chapter describes how to use the Wake-On-LAN feature to wake-up the LAN group PCs. Before you using the feature, please check the note as below. 12B4.1 How to enable the Wake-On-LAN Feature (ENW-9503A Only) Before you use the Wake-On-LAN, here are some point have to note: 1. Check your Mother Board supports this feature. 2. If your Mother Board not supports the standard for PCI 2.2 above, you have to use the WOL cable to connect with the Mother Board. 1. When the …

11, 8 4BChapter 5 Specifications Product ENW-9503A / ENW-9504 Hardware Specification Attachment Interface PCI 2.1/2.2 Bus Master, 32-bit, 33MHz Media Interface 1 x 10/100Mbps Auto-Negotiation RJ45 Port Cabling Options Category 5/5e or above, 4-pair LED Indicators Link / Active per port Transmission Rate 10/100Mbps for Half-Duplex mode 20/200Mbps for Full-Duplex mode Advanced Function Slot 1 x BOOTROM Slot (ENW-9503Av2 only) NOS Support…