Ozito ORBITAL SANDER Instruction Manual

1, ORBITAL SANDER 1/2 SHEET INSTRUCTION MANUAL SPECIFICATIONS Input: 230-240V ~ 50Hz Power: 350W No Load Speed: 12,000 /min Pad Shape: 1/2 Sheet Pad Size: 230 x 115mm Weight: 2.05kg HSS-5000 WHAT’S IN THE BOX Orbital Sander ozito.com.au Sanding Sheet x 3 …

2, ONLINE MANUAL Scan this QR Code with your mobile device to take you to the online manual. 1 Front Handle 2 Metal Base Plate 3 Spring Clamp 4 On/Off Switch 5 Rear Handle 6 Dust Canister ORBITAL SANDER KNOW YOUR PRODUCT 1. ATTACHING SANDPAPER SETUP & PREPARATION Ensure the tool is disconnected from the power supply before performing any of the following operations. 2. Fold the sandpaper to match the contours of the sanding pad. 1. Unlock the spring cl…

3, Ozito ORBITAL SANDER 2. DUST CANISTER 3. CONTROLS OPERATION 1/3 Full 2. To remove, pull the dust canister away from the dust extraction port. 1. Push the dust canister onto the dust extraction port until it clicks into place. Install 3. Regularly check the dust canister and empty when it becomes 1 /3 full for optimum dust extraction. Remove Empty The tool is recommended for use with a residual current device with a rated resid…

4, HSS-5000 4. SANDING 5. TIPS 1. Secure the material to be sanded. 2. Firmly grasp the sander. Turn it on and let the motor build up to maximum speed. Gradually lower it onto the workpiece using a forward movement. 3. For optimum results, use backward and forward strokes. Note: Keep the entire sanding pad in contact with the workpiece at all times during sanding. • Never force the sander. The weight of the sander supplies adequate pressure, allowi…

5, Ozito ORBITAL SANDER MAINTENANCE DESCRIPTION OF SYMBOLS CARING FOR THE ENVIRONMENT TROUBLESHOOTING Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice. Recycling packaging reduces the need for landll and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. C…

6, SPARE PARTS Tool: 1/2Sheet Orbital Sander Model No. HSS-5000 Item No. Description Part No. How To Order 5 10 22 23 31 On/off Switch Carbon Brush (pair) Wire Paper Clamp Holder Foam Pad SPHSS5000-05 SPHSS5000-10 SPHSS5000-22 SPHSS5000-23 SPHSS5000-31 Available spare parts can be ordered through the Special Orders Desk at any Bunnings Warehouse. If you have any further questions, please contact Ozito Customer Ser…

7, ORBITAL SANDER SAFETY WARNINGS WARNING! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce risk of re, electric shock, personal injury and material damage. Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool. Save these instructions and other documents supplied with this tool for future reference. The electric motor has been designed f…

8, IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: Australia 1800 069 486 New Zealand 0508 069 486 3 YEAR REPLACEMENT WARRANTY Your product is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do It Yourself) use only.…