Huskie Tools REC-530Y Operating Instructions Manual

Operating Instructions Manual for Huskie Tools REC-530Y Cutter (12 pages)

Specifications:

720/720240-rec530y.pdf file (29 Nov 2023)
  • Manufacturer: Huskie Tools
  • Category of Device: Cutter
  • Document: REC-530Y, File Type: PDF Operating Instructions Manual
  • Updated: 29-11-2023
  • Count of Pages: 12
Download REC-530Y Manual (12 pages)

Read Huskie Tools REC-530Y Document Online:

Data: UPD 29th November 2023

Huskie Tools REC-530Y Cutter PDF Operating Instructions Manual (Updated: Wednesday 29th of November 2023 02:06:51 PM)

Rating: 4.5 (rated by 86 users)

Compatible devices: REC-5OU, SP-85, ECO-336B, RCC-MK754ACM, S-32CC, REC-S524H, REC-5OM, 7M PRO LINE Series.

Recommended Documentation:

Text Version of Huskie Tools REC-530Y Operating Instructions Manual (Summary of Contents)

(Ocr-Read of the Huskie Tools REC-530Y Document (Main Content), UPD: 29 November 2023)
  • 1, Huskie Tools REC-530Y Operating Instruction Manual REC-530Y Battery Powered Cutting Tool with Parts List HUSKIE TOOLS, INC. …

  • 2, 1http://www.huskietools.com [email protected] REC-530Y SPECIFICATIONS C RIMPING TOOL (REC-530Y) BATTERY CARTRIDGE (BP-70E) BATTERY CHARGER (CH-35R) OPTIONAL ACCESSORIES STANDARD ACCESSORIES BATTERY POWERED SCISSOR-TYPE CUTTER 1-3/16” JAW OPENING • Cuts ACSR up to 336 • 1-3/16” Jaw Opening • Cuts up to 50…

  • 3, 2http://www.huskietools.com [email protected] STANDARD ACCESSORIES OPTIONAL ACCESSORIES BATTERY CARTRIDGE BP-70E BATTERY CHARGER CH-35R CARRYING CASE REC-458CASE SHOULDER STRAP ROB-S01 DC CHARGER CH-70DCH BATTERY CARTRIDGE BP-70EI GUIDE TO CUTTING CYCLES This guide indicates the number of cutting c…

  • 4, Huskie Tools REC-530Y 3http://www.huskietools.com [email protected] 1. Select only the appropriate material to be cut. Cutting materials other than those specified will result in severe tool damage and may cause personal injury. Consult factory if you have any questions about cutting capacities. 2. Always cut the material at the …

  • 5, 4http://www.huskietools.com [email protected] OPERATING INSTRUCTIONS 1 Insert the plug end into a 120V power source. The LED indicator will flash red indicating the charger is now in “stand-by” mode and ready to charge the battery. Do not plug the charger into a generator as this will likely cause the f…

  • 6, Huskie Tools REC-530Y 5 http://www.huskietools.com [email protected] OPERATING INSTRUCTIONS CUTTING: 1. Retract blades by pressing the release button. 2. Make sure that material being cut is within the specified cutting capacity of the tool. 3. Place the material to be cut between the blades and press the advance trigger unti…

  • 8, 7http://www.huskietools.com [email protected] MODEL REC-530Y PARTS LIST 1 M4 X 20 Screw 558-01 6 49 PS-8 Pent Seal 16-44 1 2 Housing ( R ) 558-02 1 50 P-8 Back-Up Ring (B.C.) 85-33 1 3 M3 X 6 Screw R150-02 1 51 Spring (590) R150-23…

  • 9, 8http://www.huskietools.com [email protected] PROBLEM CAUSE SOLUTION MOTOR RUNS, BUT THE TOOL JAWS WILL NOT ADVANCE Insufficient Hydraulic Oil Consult Factory for Repair Service Air Block in Hydraulic System Invert tool to allow air to rise towards the top of the oil bladder Defective Hydraulic Circuit …

  • 10, All Huskie REC-Series battery driven products carry a 5 year warranty, and the ECO-Series carry a 3 year warranty. The BP-70E, BP-70EI, and the BP-70MH batteries carry a 5 year warranty from the date stamped on the battery. The LED indicator on the BP-70-EI battery carries a 1 year warranty from purchase date. Hydrau…

  • 11, H OW TO GET SERVICE UNDER THE TERMS OF THE LIMITED WARRANTY Return your product directly to Huskie Tools, Inc. as our representative network is not prepared to service the product under the terms of this warranty. 1. Write, call or fax Huskie stating the tool’s purchase date and problem. You will b…

  • 12, Huskie Tools REC-530Y 198 N. Brandon Drive Glendale Heights, Illinois 60139 (630) 893-7755 Fax (800) 345-3767 Toll Free 1-800-860-6170 http://www.huskietools.com [email protected]

DOC-f8a66e82:

Recommended:
VR4940, AKZM 693/WH/L, S300, DVD2100

Additional Information:
# Brand Model Document Type/File Pages File Size Last Checked
1 Flymo
EASICUT 420
103 02/10
2 TSI Instruments
TC-50
17 25/10
3 ITW Signode
CU-25
2 28/09
4 LaserMech
FiberCUT 2D
68 14/09
5 Hitachi
CM 75EAP
48 22/08
6 Billy Goat
SC180H
23 2.68 Mb 20/01

Popular Right Now:

# Brand Model Document (PDF) Pages Size Check Date
1 Snapper
E2512523BVE
36 2.44 Mb 03.10.2023
2 Amtrol
Value-Well Famuly 100 PSIG
12 2.02 Mb 19.01.2024
3 Maxi-matic
EDF-1300
5 09.02.2024
4 Nokia
DNT2Mi-fp
60 16.02.2024
5 Makita
N5900B
8 10.02.2024
6 Frigidaire
GLES388D
10 04.11.2023
7 Lexmark
T656
313 27.11.2023
Operating Impressions, Questions and Answers: