Pro-Form PFEVEL26040 Operation & User’s Manual

1, CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manu - al for future reference. Model No. PFEVEL26040 Serial No. Part No. 216020 R0904A Printed in China © 2004 ICON IP, Inc. QUESTIONS? As a manufacturer, we are com- mitted to providing complete cus- tomer satisfaction. If you have questions, or if there are missing or damaged parts, please call: Or write: ICON Health & Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road, Beeston Leeds, LS11 8JG UK …

2, Pro-Form PFEVEL26040 EXPLODED DRAWING—Model No. PFEVEL26040 R0904A 15 TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 ASSEMBLY . . . . . . . . . . . . . . . . . …

3, 3 IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precau- tions before using the elliptical crosstrainer. 14 Note: # indicates a non-illustrated part. Specifications are subject to change without notice. Key No. Qty. Description Key No. Qty. Description PART LIST—Model No. PFEVEL26040 R0904A 1. Read all instructions in this manual before using the elliptical crosstrainer. Use the elliptical crosstrainer only as described. 2. It i…

4, Pro-Form PFEVEL26040 4 BEFORE YOU BEGIN Congratulations for selecting the new PROFORM ® 535 SMR elliptical crosstrainer. The 535 SMR elliptical crosstrainer is an incredibly smooth exerciser that moves your feet in a natural elliptical path, minimizing the impact on your knees and ankles. And the unique 535 SMR features adjustable resistance and a simple- to-use console to help you get the most from your exer- cise. For your benefit, read this manual carefully before using the ell…

5, 12 5 ASSEMBLY Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex keys, assembly requires a phillips screwdriver , an adjustable spanner , and a rubber mallet . Use the chart below …

6, 6 11 2. Whilst another person lifts the back of the Frame (1), attach the Rear Stabiliser (28) to the Frame with two M8 x 53mm Button Bolts (34), two M8 W ashers (48), and two M8 Nylon Locknuts (38). 34 28 48 48 1 2 38 3. The Console (23) requires four 1.5V “D” batteries; alkaline batteries are recommended. Remove the screw from the battery drawer, pull the battery drawer open, and insert four batteries. Make sure that the batteries are oriented as sho…

7, 50 38 10 7 6. Identify the Left Handlebar (6), which is marked with a sticker. Insert the Left Handlebar into one of the Handlebar Arms (5); make sure that the Handlebar Arm is turned so the hexagonal holes are on the indicated side. Attach the Left Handlebar to the Handlebar Arm with two M8 x 38mm Button Bolts (50) and two M8 Nylon Locknuts (38). Make sure that the Nylon Locknuts are inside of the hexagonal holes. Do not fully tighten the Button Bolts yet. Apply a small amount of the included grease to the left axle on the Upright (2). M…

8, 98 9. Make sure that all parts of the elliptical crosstrainer are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical crosstrainer. 8. Apply a small amount of grease to the axle on the left Disc Crossbar (16). Slide the Left Pedal Arm (11) and a Wave Washer (9) onto the axle. Next, slide an M10 Washer (35) onto an M10 x 25mm Pa…