LG LF 54 series Operation & User’s Manual

11, ENGLISH 3 Safety instructions Please read these safety precautions carefully before using the product. WARNING Do not place the TV and/or remote control in the following environments: •  A location exposed to direct sunlight •  An area with high humidity such as a bathroom •  Near any heat source such as stoves and other devices that produce heat •  Near kitchen counters or humidiers where they can easily be exposed to steam or oil •  An …

25, LG LF 54 series ENGLISH 17 Licenses Supported licenses may dier by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This DivX Certied® device has passed rigorous testing to ensure…

46, 10 ENG ENGLISH 10 EXTERNAL CONTROL DEVICE SETUP Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35. Set ID = All = 00 Data 00 = Channel Data is …

37, LG LF 54 series OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. w ww.lg.com …

42, 6 ENG ENGLISH 6 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled. * [Set ID] is indicated as…

9, LG LF 54 series Please read this manual carefully before operating your set and retain it for future reference. www.lg.com Safety and Reference OWNER’S MANUAL LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights. *MFL68761002* P/NO : MFL68761002 (1506-REV04) Printed in Korea …

23, ENGLISH 15 Adapter connection (Depending on model) CAUTION •  Please be sure to connect the TV to the AC-DC power adapter before connecting the TV’s power plug to a wall power outlet. Satellite dish connection (Only satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). HDMI ULTRA HD deep colour settings (Only UF67**) •  SETTINGS PICTURE HDMI ULTRA HD Deep Colour HDMI (1/2) ULTRA HD Deep Colour - On : Sup…

24, 16 ENGLISH A (POWER) Turns the TV on or o. Selects Radio, TV and DTV programme. Recalls your preferred subtitle in digital mode. 1 Resizes an image. (Depending on model) 1 Shows programme guide. (Depending on model) 1 By pressing the AD button, audio descriptions function will be enabled. (Depending on model) 1 Selects an AV mode. (Depending on model) 2 Selects an AV mode. (Depending on model) 2 Resizes an image. (Depending on model) 2 Accesses the main menus. (Depending on model) …

30, 22 ENGLISH Specications AC/DC Adapter 32LF51** 43/49LF51** Manufacturer : Honor Model : ADS-45EI-19 19040GPI, ADS-45FSN-19 19040GPG, ADS-45FSN-19 19040GPCU, ADS-40LSI-19-2 19040G, ADS-45SN-19-2 19040G Manufacturer : APD Model : WA-40D19FI Manufacturer : Lien Chang Model : LCAP16B-E, LCAP16B-A, LCAP25B Manufacturer : Lien Chang Model : LCAP40 Manufacturer : APD Model : DA-65F19 In : AC 100 - 240 V ~ 50/60 Hz Out : DC 19 V 2.1 A In : AC 100 - 240 V ~ 50/60 Hz Out : DC 19 V 3.42 A Environment con…

22, LG LF 54 series 14 ENGLISH A B CAUTION •  Disconnect the power rst, and then move or install the TV. Otherwise electric shock may occur. •  Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. •  If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorised LG wall mount and contact the local dealer or qualied personnel. •  Do not over tighten the screws as this may cau…

47, 11 ENGENGLISH 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 02 : Satellite DTV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV 01 : CADTV 10 : ATV 20 : AV or AV1 21 : AV2 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 Ack [b][ ][Set ID][ ][OK/NG][Data][x] * This function depends on m…

45, 9 ENGENGLISH 9 EXTERNAL CONTROL DEVICE SETUP 1 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data 00 : Off 01 : Minimum 02 : Medium 03 : Maximum 04 : Auto (For LCD TV / L…

48, LG LF 54 series 12 ENG ENGLISH 12 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] …

18, LG LF 54 series 10 ENGLISH Preparing NOTE •  Image shown may dier from your TV. •  Your TV’s OSD (On Screen Display) may dier slightly from that shown in this manual. •  The available menus and options may dier from the input source or product model that you are using. •  New features may be added to this TV in the future. •  The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned o if it will not be watched …

39, 3 ENGENGLISH 3 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity…

28, 20 ENGLISH To set password SETTINGS LOCK Set Password Sets or changes the TV password. The initial password is set to ‘0000’. To return Factory Reset SETTINGS OPTION Factory Reset All stored information is deleted and TV settings are reset. The TV turns itself o and back on, and all settings are reset. •  When Lock System is in place, a pop-up window appears and asks for password. •  Do not turn o�…

5, 1 IN Y/ VIDEO Y/ VIDEO ANTENNA / CABLE IN Y/ VIDEO ) ) VIDEO (MONO) AUDIO VIDEO MONO () VIDEO B-2 LF54*T, LF54*Y …

16, 8 ENGLISH Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. If the product feels cold to the touch, there may be a small “icker” when it is turned on. This is normal, there is nothing wro…

32, LG LF 54 series 24 ENGLISH HDMI-DTV supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.46 31.50 59.94 60.00 720 x 480 31.47 31.50 59.94 60.00 720 x 576 31.25 50.00 1280 x 720 37.50 50.00 1280 x 720 45.00 60.00 1280 x 720 44.96 59.94 1920 x 1080 28.12 33.75 33.72 56.25 67.50 67.43 27.00 26.97 33.75 33.71 50.00 60.00 59.94 50.00 60.00 59.94 24.00 23.97 30.00 29.97 3840 x 2160 53.95 54 56.25 61.43 67.5 112.5 135 135 23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.00 4096 x 2160 5…

8, *MFL68883102* A F C B E G 1 G 2 D 43LF540T-TA 43LF5400-TB 43LF540T-TB 43LF540Y-TB 49LF540T-TA 49LF5400-TB 49LF540T-TB 49LF540Y-TB A x B x C (mm) 971 x 624 x 198 1103 x 698 x 198 A x E x F (mm) 971 x 575 x 58.7 1103 x 650 x 58.7 D (kg) 9.8 13.4 D - ( G 1 + G 2 ) (kg) 9.5 13.1 …

14, 6 ENGLISH If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury. If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), x it carefully so as not to drop. Only use the attachments / accessories specied by th…

33, ENGLISH 25 Environmental Information (India region only) Disposal of your old appliance (as per e-waste Rules) 1. When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means the product is covered by the e-waste Management and Handling Rules, 2011 and are meant to be recycled, dismantled, refurbished or disposed o. 2. Dos a. The product is required to be handed over only to the …

15, ENGLISH 7 Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not aect the operation or performance of the product. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Prevent dust collecting on the power plug…

19, ENGLISH 11 Maintenance Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. •  Make sure to turn the power o and disconnect the power cord and all other cables rst. •  When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. Screen, frame, cabinet and stand To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth. To remove major dirt, wi…