Airlink101 AR686W Operation & User’s Manual

13, 9 Step 4 Click on Wizard. Step 5 Please make sure your computer is connected to one of the 4 LAN ports of the router, and your modem is connected to the WAN port of the router. …

76, Airlink101 AR686W 72 3.4 Advanced Setting This page allows you to set up System Time, System Log, Dynamic DNS, QoS Rule, SNMP, Routing and Schedule Rule, and other advanced settings. …

35, 31 B) Dynamic IP Address Parameter Description Host Name Please input the host name of your router; this is optional and only required if your service provider asks you to do so. WAN’s MAC Address Please input MAC address of your computer here if your ISP only permits…

27, 23 Step 11 When you see the below window, you are successfully connected to the Internet. Click Finish. Congratulations! Your router configuration has been finished. Please go to 2.4 Connect to the Router Wirelessly. …

83, 79 rule. Remote IP Address Specify a remote (destination) IP address that will be affected by this rule. Ports Please input the range of remote (destination) port number that will be affected by this rule. If you want to apply this rule on port 80 to 90, please input “80-9…

98, 94 Chapter 5 Appendix 5.1 Hardware Specification Standards • IEEE 802.11b / g / n • IEEE 802.3, 802.3u, 802.3ab Frequency • 2.4GHz Ports • 1 x 10/100Mbps WAN port • 4 x 10/100Mbps LAN port Antenna typ…