BURG WATCHER secuENTRY Manual 

2, secuENTRY English | 2 Dear customer, Thank you very much for your decision for the secuENTRY electronic lock system manufactured by BURG-WÄCHTER. This system has been developed and manufactured using the latest technical potential and satises high security requirements. The…

6, BURG WATCHER secuENTRY secuENTRY English | 6 Installation instructions for the secuENTRY cylinder Please read these Installation Instructions carefully before the assembly and then store them at a safe place. Remark: The base size of the cylinder is 30 mm per side. When shipped, the cylinder has, on its inner side…

3, secuENTRY English | 3 Optical signalling Optical signalling in the form of a LED is incorporated in the knob on the outer side of the door. This LED informs you on the following: • 1 x brief: cylinder coupled • 2 x brief: cylinder uncoupled • 1 x brief, 1 × long, 2 sec paus…

4, secuENTRY English | 4 ENTRY Fingerprint General information The electronic cylinder is operated using a scanned nger. Up to 24 ngers can be programmed using the keypad. The users are created separately (USER XXX_FP). If a code and/or an transponder should be additionally assigned …

8, secuENTRY English | 8 Installation instructions for secuENTRY keypad The keypad is only included in ENTRY Pincode and ENTRY Fingerprint sets. Attention! Please remember that the keypad should not be attached to the door itself, otherwise it would transmit shocks when the door is being shut. …