Auber WSD-1501GPH Manual 

2, 2 Instruments only. Using it to control a not recommended device can be dangerous and cause fire. Auber Instruments is not liable for damages caused by misuse of the controller. If you are not sure the controller can be used, please contact Auber Instruments before use. If an abnormal d…

9, 9 hours, waiting you to pick the food. If you set C-3=0 and t-3=0, when meat internal temperature reaches 160 °F, the controller will shut off the heater, flashing END on both windows, and turn on the beeping alarm to notify you that cooking is finished. Table 1. Initial…

3, 3 4) Smoker generator control output status indicator. When lit, the smoker generator control output is on. When off, the output is off. 5) Timer status indicator - When lit, right window shows the time passed since power up. When it is off, right window shows the current tempera…

6, Auber WSD-1501GPH 6 c) Connecting the controller output to the Bradley Smoker Tower with the power cord that came with the Auber Controller Auber Controller Smoke Generator Smoker Tower Probe 1: Cabinet Temp Probe 2: Internal Temp Cable A Cable B To Power Outlet Figure 5. Diagram Figur…

5, 5 Cable B: Power cable for smoke generator, NEMA5-15P plug 1) Connection for Bradley Original Smoker, with control of the smoker generator. a) Connecting the controller to the power outlet, you should use the power cord that came with the Bradley Smoker for connecting the smoker g…

8, 8 3. Programming the smoking temperature profile. A total of 6 steps can be programmed for this controller. Each step contains the set temperature (C-X) and an ending criteria setting (E-X), where “X” is the step number (e.g. Step 4 temperature is represented by C-4 and step 4 e…