Nonin 2500 PalmSAT Operator's Manual

22, 16 Memory Functions Memory Functions Each time the Model 2500 is turned on (except during Setup mode), data are automatically collected in memory. The device can collect and store up to 72 hours of SpO 2 and pulse rate information. NOTE: Only recording sessions longer than 1 minute are stored i…

19, 13 Detailed Operation Month nn 00 - 12 00 Day d01 - 31 00 Hour h00 - 23 00 Minute nn 00 - 59 00 a. Choosing “yes” for both the CLr and dEL settings (the memory clear function) will clear the memory and exit setup mode. Table 2: Adjustable Parameters and Settings (Continued) Setting Appea…

15, Nonin 2500 PalmSAT 9 Using the PalmSAT Pulse Oximeter Important Notes about Battery Use Four AA alkaline batteries provide the device with approximately 80 hours of continuous operation, while the Rechargeable NiMH Battery Pack provides approximately 40 hours of continuous operation. Clock/calendar settings ca…

17, 11 Using the PalmSAT Pulse Oximeter Monitoring Verify that the pulse oximeter sensor is properly positioned on the patient. Ensure that the pulse oximeter is sensing adequate pulse quality by: • verifying that the Pulse Quality display is blinking green and • verifying that th…

8, 2 Indications for Use The device turns off after approximately 10 minutes when at critically low battery capacity. Before changing the batteries, make sure the device is off and the sensor is not applied to a digit. Cautions Before use, carefully read the Instructions for Use provided …