MIMAKI JV34-260 Operation Manual

52, 2-24 Entering the media remaining amount When [MEDIA RESIDUAL] of the maintenance function is "ON" ( P.5-25), the screen for entering media remaining amount is displayed after detecting the media width. 1 Display the screen for entering media remaining amount. 2 Press and key…

179, MIMAKI JV34-260 This chapter contains the lists of the specifications and functions of this machine. Specifications ..................................................................................7-2 Machine specifications ....................................................................7-2…

144, 5-16 When Nozzle Clogging Cannot Be Solved When nozzle clogging cannot be solved even after the ink head cleaning ( P.2-34) or head nozzle washing ( P.5-8) has been done, perform the following two functions: FILL UP INK 1 Select [HD.MAINTENANCE] of the maintenance menu. (1) Press the key in LO…

99, Machine Settings 3-33 1 1 3 Convenient use 5 6 Setting of Tension Bar Position Set the operating position of the tension bar for the heavy duty take-up device while printing. 1 Press the key in LOCAL. 2 Press to select [MACHINE SETUP]. 3 Press the key. 4 Press to select [Feeding/TakeUP].…

89, Setting Cleaning during Printing 3-23 1 1 3 Convenient use 5 6 Setting the WIPING When the set number of times scanning is performed has been reached during a printing operation, a wiping operation is performed automatically to prevent ink dew condensation on the nozzle face. In the following cas…

46, 2-18 Adjust the take-up/ feeding tension-bar To take-up stably for the various media, adjust the take-up/ feeding tension-bar.  Setting the active position of the take-up tension-bar (For the setting, see P.3-33) Change the settings depending on the media type. For the stretchy media, it is …