MiniFinder PICO Operation & User’s Manual

7, - 7 - 6.2 Reply with Address. Command: ADD Notes: This function needs GPRS function support! The device will reply “Add: Storgatan 35, Stockholm, Sweden; 7. Cell Locate ※The unit can be tracked by GSM base station tower, If GPS signal is not available for example in room, underground et…

3, Copyright © MiniFinder 2015 - 3 - 2. Getting Start 2.1 Hardware and Accessories Product box includes: Device USB-cable 2.2 Product overview …

14, - 14 - 28. Initialization Command: RESET! Note: This is to make all settings back to the factory default. 29. Built-in Memory The device built in 8MB flash memory inside. It will store the GPS information when do not have GSM network coverage (i.e., very low population density…

9, - 9 - 11. Movement Alert Command: M1, xxxM/KM Notes: xxx is the preset distance to the tracker’s original place, must be 3 digitals. M means meters, KM means kilometers Example: m1,100m When the tracker moves out of 100 meters, it will send SMS alarm to the preset numbers. …

8, MiniFinder PICO - 8 - To turn off this function, please send G1,0 or G2,0 or G3,0 9. Over-Speed alert Command: SPEED1,+ SPEED Notes: The speed must be in value of speed and in 2 or 3 digitals. (01~255km/h) Example: speed1,100 Suppose the over-speed alert that we want to set is 100km/h, when the device moves …