MISUMI IESH-MB205-R Series Hardware Installation Manual

11, - 11 - Environmental Limits Operating Temperature -10 to 60°C (14 to 140°F) Storage Temperature -40 to 70°C (-40 to 158°F) Ambient Relative Humidity 5 to 95% (non-condensing) Regulatory Approvals EMI FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD) , le…

15, - 15 - D INレール MISUMI IESH-MB205-RのDINレール を取り外すには、マイナスのドライバを IESH-MB205-Rの下のDINレール・キッ トに水平に挿入して引き上げるようにし ます。 配線要件 安全第一！ MISUMI EtherD…

8, - 8 - Communication Connections The IESH-MB205-R has five10/100BaseT(X) Ethernet ports. 10/100BaseT(X) Ethernet Port Connection The 10/100BaseT(X) ports located on the switch’s front panel are used to connect to Ethernet-enabled devices. Below we show pinouts for both MDI (N…

10, MISUMI IESH-MB205-R Series - 10 - Switching and Address Learning The EtherDevice switch has an address table that can hold up to 1K node addresses, making it suitable for use with large networks. The address tables are self-learning, so that as nodes are added or removed, or moved from one segment to anothe…

7, - 7 - Wiring the Power Inputs The two left-most contacts of the 3-contact terminal block connector on the top panel are used for the DC and AC inputs. Top and front views of one of the terminal block connectors are shown here. STEP 1: Insert the negative/positive DC wires into the…

20, - 20 - 保存時温度 - 40～70℃ 環境相対湿度 5 ～95%（結露なきこと） 対応認証 EMI FCC Part 15, CISPR (E N55022) class A EMS EN61000 -4-2 (ESD), EN61000 -4-3 (RS), EN61000 -4-4 (EFT), EN61000 -4-5 (Surge), EN61000 -4-…