OfficeServ 100 Series Operation & User’s Manual

37, OfficeServ 100 Series 99 Change playback speed of the recording. [Not available on OS 7030, OS 7100, OS 7200-S or OS IP-UMS] There are two levels of speed during playback. Dialing this code will toggle between the two speeds. 0 Play options. Pressing this key will play all the menu options available to you fro…

13, 19 CALLING YOUR SYSTEM OPERATOR •Dial 0 to call your system operator or group of operators. •If you want to call a specific operator,dial that person’s extension number. NOTE: If the Hot Keypad feature has been turned off, you must first lift the hand- set or press the SPEAKER key before you…

31, 55 CALLER ID WHAT IS CALLER ID? Caller ID is the name given to the telephone company-provided feature that de- livers the telephone number and sometimes the name of the person calling your phone. There are two types of Caller ID; the first delivers the calling party’s tele- phone num…

24, •When you receive a busy signal,press the OHVA key. •After the attention tone,begin speaking. •Finish the call by replacing the handset or pressing the ANS/RLS key. •Press the flashing CALL button on your keyset. This will place the original party on hold and allow …

44, 81 -However,the Voicemail Administrator can adjust parameters per sub- scriber or group of subscribers that decide how, when, or if to delete the original voice message after it is sent to the E-Mail Server. •When full synchronization of messages between Voicemail Box and E-mail Inbox is re…

8, 8 iDCS 64B AOM 12345 678910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 64 PROGRAMMABLE KEYS WITH RED LIGHTS Used to call stations directly, to indicate busy conditions of other st…