Sealy RS131.V3 Instruction Manual

6, from the valve stem. NOTE: It is recommended to use a separate air gauge to double check the actual ination pressure achieved. Replace any valve cover previously removed. 8. STORAGE 8.1. STORAGE 8.1.1. This unit may be stored in any position. Ensure that the clam…

1, INSTRUCTIONS FOR ROADSTART EMERGENCY POWER PACKS MODEL NOS: RS131.V3, RS132 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEAS…

7, Sealy RS131.V3 NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, …

4, indicators are illuminated the unit is fully charged and the charger should be disconnected from the unit and from the AC supply. 5.4. RECHARGING WITH THE DC CHARGING CABLE V IMPORTANT: Always ensure that the vehicle voltage matches the voltage of the Roadstart unit. Do not operate …

5, 6.6.2. Press the battery check button. If the green lights do not illuminate the unit must be charged before it can be used for jump starting. 6.6.3. Ensure that all cables are clear of moving belts and rotating fans. 6.6.4. Maintain a safe distance from the battery whilst jump starting. 6…

3, WARNING! YOU MUST FOLLOW THE SAFETY INSTRUCTIONS 5. CHARGING INSTRUCTIONS 5.1. INTIAL CHARGING OF THE ROADSTART UNIT NOTE: This product may arrive partially charged. The unit must be fully charged immediately after purchase and before using for the rst time. 5.1.1. The…