US Robotics USR9108 - U.S. Robotics Wireless MAXg Operation & User’s Manual

4, US Robotics USR9108 - U.S. Robotics Wireless MAXg computer uses). Linux users: Open the CD- ROM, browse to \plat forms\linux, and double- click on inst all.bin. 2. Select your preferred language and click OK. 3. If you are using Windows, the installer runs a qualification test to verify that your system meets the minimum requirements for ins…

3, To make the needed connections, follow these steps: A. Attach the antenna to the back of the gateway. B. Connect one end of the telephone cable to the telephone port on the back of your gateway (labeled ADSL). Connect the other end to the telephone wall jack. C. Connect the yellow Ethernet c…

7, Follow the on-screen instructions to configure security, and click Apply when done. The status page of the gateway's Web user interface automatically appears after you do this. PDFmyURL.com …

8, Your wireless network is now secure. You may close EasyConfigurator and the Web user interface. You can now start up a Web browser. We suggest that you test your connection by registering your product on the following Web page: www.usr.com/product reg You can use the gateway’s Web user …

2, To install a microfilter, plug each device (phone, fax machine, or other telephony device) into the microfilter, and then plug the microfilter into the telephone wall jack. Do not install a microfilter on the cable that connects your ADSL gateway to the telephone jack unless your microfilter has…