SOMMER S 9060 base Installation And Operating Manual

52, 52 46900V000-072015-0-OCE-Rev.A_01_EN 13. Operation 13.3. Obstacle detection WARNING Danger of crushing and shearing! The door can be actuated by a button or another control device. Persons who cannot see the door and are in the range of movement of the mechanism or the closi…

25, SOMMER S 9060 base 25 46900V000-072015-0-OCE-Rev.A_01_EN ò ò ò ò  PP  PP  PP Fig. 2 Fig. 3 2. Close the door. Select the lintel or ceiling for installation. The space required for ceiling installation is more than 35 mm. Measure the front of the centre of the d…

33, 33 46900V000-072015-0-OCE-Rev.A_01_EN 9. Initial operation 9.2. Initial operation Before initial operation read this chapter with special care to ensure that you can make the adjustments to the operator safely and optimally. WARNING Danger of entrapment! If the force setting is too h…

24, 24 46900V000-072015-0-OCE-Rev.A_01_EN  PP  PP  PP Fig. 8 Fig. 9 8. Tension the chain to the mark on the slide-in part (see arrow in the detailed view). 9. Screw the two header brackets to the slide-in part with bolt and nut.  PP % $&. + ,…

43, 43 46900V000-072015-0-OCE-Rev.A_01_EN 10. Connections and special functions of the carriage 10.13. Adjusting the lighting function The operator lights on the carriage can be switched on and off separately over radio channel CH 2. This function is available in the factory setting. Program…

61, 61 46900V000-072015-0-OCE-Rev.A_01_EN 15. Troubleshooting Problem Possible causes Test/check Remedy Operator stops while the door is opening • Door detected an obstacle • Check whether there are any objects in the movement range of the door • Check the weight balanc…