Potterton Osprey 2 CFL 125 Manual, Installation And Servicing Instructions

3, Potterton Osprey 2 CFL 125 3 1.0 Introduction 4 2.0 General Layout 5 3.0 Technical Data 6 4.0 Dimensions 7 5.0 System Details 8 6.0 Site Requirements 10 7.0 Installation 13 8.0 Commissioning the Boiler 15 9.0 Servicing the Boiler 17 10.0 Changing Components 19 11.0 Illustrated Wiring Diagram 23 12.0 Fault Fin…

8, 5.0 System Details 8 5.1 Primary Circuit 1. The appliance is suitable for fully pumped systems only. The system can be open vented or sealed. 2. A sealed system must incorporate the following:- • Safety Valve • Pressure Gauge • Expansion Vessel • Filling Point Reference must b…

10, 6.0 Site Requirements 10 6.1 Information 1. The installation must be carried out by a CORGI Registered Installer or other registered competent person and be in accordance with the relevant requirements of the current Gas Safety (Installation and Use) Regulations, the Building Regulation…

22, 10.0 Changing Components 22 10.7 Flue Safety Thermostat 1. Undo the nut securing the Flue Safety Thermostat to the draught diverter. Ease the cable clamp from the slot in the draught diverter (Figs. 47 & 48). 2. Undo the screw retaining the earth wire to the boiler and disconnect the plug on t…

4, Potterton declare that no substances harmful to health are contained in the appliance or used during appliance manufacture. 1.1 Description 1. The Potterton Osprey 2 CFL is a fully automatic gas fired floor standing conventionally flued boiler with a cast iron heat exchanger. 2. The boiler is desi…

17, 9.0 Servicing the Boiler 17 9.1 Annual Servicing 1. For reasons of safety and economy, it is recommended that the boiler is serviced annually. Servicing must be performed by a competent person. 2. After servicing, complete the relevant section of the “Benchmark” Installation,…