Power Glide 60109411 Instruction Manual

1, Model No: 60109411 ® 1/4 Sheet Palm Sander Instruction Manual Type 60109411 Input Voltage 120V ~ 60Hz Input Power  1.5 Amp No Load Speed 14,000 OPM Pad Dimensions  4-1/4” x 4-1/4” (108 x 108mm) Paper Size 4-1/2” x 5-1/2” (114 x 140mm) Orbit Size …

2, 1 WARNING: Read all instructions. Failure to follow all instructions listed below may result in  electrical shock, fire and/or serious injury. The term “power tool” in all of the warnings listed  below refers to your mains-operated (corded) power tool or battery-oper…

3, 9 2 Power Tool Use And Care 1. Do not force the power tool. Use the correct power tool for your application. The correct  power tool will do the job better and safer at the rate for which it is designed. 2. Do not use power tool if switch does not turn it on or off. Any power tool that can…

4, Power Glide 60109411 3 8 Basic Operation WARNING:  • Always work in a well-ventilated area. Sanding can produce fine dust that can ignite if  exposed to open flame or sparks.  • Risk of electrical shock - do not use tool for wet sanding or polishing with liquids. Do not  expose the…

5, 7 4 CONNECTION TO THE POWER SUPPLY Electrical Safety 1.  Double Insulated tools are equipped with a polarized plug (one blade is wider than the other.)  This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,  reverse the plug. If it s…

6, Closed 5 6 CONTENTS 1. Sander 2. Dust Collector 3. Sandpaper (1/pcs 100 grit) 4. Sandpaper Punch Plate 5. Instruction Manual 1. Grip 2. Dust Collector 3. Sandpaper Clamp 4. Base 5. On / Off Switch 1 4 5 GETTING TO KNOW YOUR TOOL 2 Figure 1Figure 1 3 FUNCTION…