Powr-Flite PEB Operator's Manual & Parts List

1, OPERATOR’S MANUAL & PARTS LIST WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. © Tacony, Inc., All rights reserved Save These Instructions POWR-EXTRACTOR BRUSH MODEL PEB X8440 PEB-Man 3/2016 …

2, Check the carton carefully for signs of rough handling. Remove the machine from the carton. If the machine is damaged, notify the carrier immediately and request an inspection. Be sure to keep the carton, packing inserts, packing lists and carrier receipt until the inspector has ver…

3, Slide adjustable clamp into desired position. 1 Tighten knob to secure hose ring into place. 3 Insert hose ring bolt into clamp. 2 Connect the female power cord receptacle with the male plugged pigtail attached at the switch housing. 4 Attach the solution hose female connector to the m…

4, Powr-Flite PEB 1. Turn on all vacuum and pump switches at the extractor unit. 2. Turn on the PEB solution switch (1). To Extract: Guide Powr-Extractor Brush backwards, overlap- ping each pass slightly, depressing either left or right brush control lever (2) to apply solution, rotationally brush and extr…

5, A Tacony Company 3101 Wichita Court • Ft. Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719 • www.Powr-Flite.com X8440 PEB-Man 3/2016 …