Pride Mobility Quantum 6000Z series Owner's Manual

23, Quantum 6000Z www.pridemobility.com 23 IV. ASSEMBLY Power Elevating Seat Installation Your power chair may be equipped with the power ele- vating seat option. While the seat itself may be any one of the styles offered for this model, the way the seat base attaches to the power base is differen…

29, Quantum 6000Z www.pridemobility.com 29 VI. BATTERIES AND CHARGING BATTERIES AND CHARGING Your power chair uses two long-lasting, 12-volt, deep-cycle batteries. These batteries are sealed and maintenance free. Since they are sealed, there is no need to check the electrolyte (fluid) lev…

20, 20 www.pridemobility.com Quantum 6000Z III. YOUR POWER CHAIR Figure 9. Drive Mode (Drive Engaged)Figure 8. Freewheel Mode (Drive Disengaged) MANUAL FREEWHEEL LEVER Dual Manual Freewheel Levers For your convenience, your power chair is equipped with dual manual freewheel levers. The lev…

34, Pride Mobility Quantum 6000Z series 34 www.pridemobility.com Quantum 6000Z VII. CARE AND MAINTENANCE  All wheel bearings are prelubricated and sealed. They require no subsequent lubrication.  The body shroud has been sprayed with a clear sealant coating. You can apply a light coat of car wax to help it retain its high-g…

28, 28 www.pridemobility.com Quantum 6000Z To clamp the quick release fastener: 1. Make sure the lever is in the open position. 2. Turn the nut clockwise until it is snug. 3. Rotate the lever until it is in the fully closed position. NOTE: If the lever will not rotate to the fully closed position, …