Pro Audio MT10 Manual 

9, MT10 9 Rear Rear DELTA 14.4-DSP Rear Rear DELTA 14.4-DSP h DELTA 14.4-DSP The six subwoofers are wired on either side using 4-pole speaker cables. The nearfield speakers are connected to the amplifier with 4-pole speaker cables. The two tops are each connected to the pin-reversed socket of the n…

3, MT10 3 General Safety Instructions: Professional loudspeakers can produce harmful sound pressure levels. SPLs above 95 dB can permanently damage your hearing. Observe the relevant guidelines regarding working safety and health protection. To avoid physical and personal damages due to loudspeak…

6, 6 c DELTA 8.4-DSP 1 2 1 The six loudspeakers are wired using 4-pole speaker cables. The four speakers (1) and the two speakers (2) will each be driven by one dedicated amplifier channel. Two amplifier channels will be assigned. Channels three and four may be used to set up an identical configu…

4, 4 Note: Only one 4-pole cable is required to connect 2-channel configurations of several MT10 and SW18 / SW28 subwoofers. Only one 4-pole cable is required to connect two e.g. monitor paths elegantly without additional reversible cables. Description: The MT10 is a universal 2-way mu…

11, MT10 11 Technical Specifications: Drivers 1 x 10" neodymium 1 x 1" neodymium Power handling (RMS / programme) 300 W / 600 W Impedance 16 ohms Frequency response 70 – 22,000 Hz (via system amplifier) Max. SPL (1 m, free field) 127 dB peak (via system amplifier) Directivity p…