Protex DigiPaz-309 Programming And Operations Manual

1, Protex DigiPaz-309 Using the power override wire If your keypad does not respond, don’t be alarmed. Most likely the batteries are dead and need replacing. You will be able to open the safe using the power override wire as follow: fig.5 fig.4 NEVER LOCK THE OVERRIDE WIRE INSIDE THE SAFE Two Prongs 1. Take a …

2, Installation / Bolting down your new safe You may want to have your new safe bolted to the floor. The safe includes 4 anchoring bolts for cement (concrete) floors. We recommend hiring a locksmith, safe-installer, handyman or a contractor to bolt the safe for you. It requires drilling …

3, Enrolling / Changing a code Enrolling a new code for the first time Changing your code IMPORTANT: TIPS: 1. Open the door and turn the handle so the bolts are out (Locked position). 2. Press and then # (This will enter the lock into a code-change mode) 3. Now enter the…

4, Protex Safe Co. ("Protex Safe Co.") warrants to the original purchaser that the product(s) shall be free of defects in material and workmanship for a period of one (1) year from the date of manufacture by Protex Safe Co. (complete safes). This warranty applies provided t…

5, Content -1- Opening the safe Enrolling /Changing a code Low battery warning Using the Battery override wire Replacing batteries Optional LED light Adjusting the shelves Installation Notes Warranty 2 3 4 5 4 6 6 7 8 9 http://www.monomachines.com/ http://www.monomachines.com/ …

6, P PROTEX SAFE CO. PROTEX SAFE CO. Protex Safe Company 8445 Canoga Avenue Canoga Park, CA 91304 USA TEL: 818-773-8030 FAX: 818-773-8003 www.protexsafe.com P PROTEX SAFE CO. PROTEX SAFE CO. User Manual ELECTRONIC LOCK PROGRAMMING AND OPERATION V 6.9 DigiPaz-309 TM http://www.monomachines.…