Tapworks Ultra 9 User And Installation Manual

8, Step-by-step guide to plumbing the softener (cont) FIT THE INLET AND OUTLET ADAPTOR ELBOWS Remove the plastic plug from the outlet port on the water softener valve, if present. Adaptor elbows are pre-fitted with a single ‘O’ ring to the outer groove. Push the adaptors into the valve inlet as…

6, Tapworks Ultra 9 Installation of your water softener (cont) SPECIFICATION REQUIREMENTS Maximum water temperature 49°C (120°F) Maximum daytime working pressure 4.76 BAR (70 psi) Minimum working pressure 1.7 BAR (25 psi) Minimum system flow 0.06m 3 /hr Maximum system flow 3.18m 3 /hr If a pressure-reducing valve …

16, Programming the Ultra 9 Faceplate Please Remember – Only use tablet or pellet salt in your softener! 15 User information (cont) HOUSEHOLD WATER USAGE INFORMATION To access these features, press the DATA button, until desired information is displayed. The information is shown below the clock. SO…

22, Programming the AD11 & AD15 Faceplates Please Remember – Only use tablet or pellet salt in your softener! 21 Setting up Your water softener has an advanced volume controlled system, which allows you to achieve significant salt and water savings during recharge: Your unit feature…

1, User and Installer Handbook Tapworks Softener Models Ultra 9, AD11 & AD15 Thank you for choosing Tapworks to supply your soft water. We are confident that you will be pleased with your purchase and would encourage you to read this installation and instruction handbook thorou…