Topfield TF-S3000CHD Operation & User’s Manual

5, CONTENTS v 3.2 Editing the transponder list . . . . . . . . . . . . . . . . . . . 24 3.3 Resetting to factory settings . . . . . . . . . . . . . . . . . . . 25 3.4 Resetting to user settings . . . . . . . . . . . . . . . . . . . . . 26 4 Preference Settings 27 4.1 Language settings . . . . . …

26, 18 Service Search satellite position, frequency range, symbol rate, polarization and LNB frequency corresponding to the frequency range. So you might not have to specify the LNB Frequency option. However, if you have selected the Other entry at the Satellite Name option to specify a satellite…

67, Topfield TF-S3000CHD 7.1 Recording a programme 59 7.1.3 Scheduling recordings using the programme guide If the electronic programme guide is properly provided, you can make timer events on it. The instructions on how to make timer recordings using the electronic programme guide are as follows: 1. Press the …

35, 27 Chapter 4 Preference Settings 4.1 Language settings You can select the language in which the menu will be displayed. In ad- dition to that, you can select the lan- guage of audio track and of sub- title track. Select the Settings > Language menu. You should see a screen like the l…

18, 10 Setup Check what connections your television set has in comparison with the digital receiver. . . . 1 LNB IN Satellite broadcasting signal input socket (Current: Max.500mA with overload pro- tection) . . . 2 LNB OUT Satellite broadcasting signal output socket through the LNB IN socket for…

22, 14 Setup To make the audio connection You need to obtain an audio cable (RCA ca- ble) to link the audio connectors. Plug one ends of the cable into the AUDIO L (white) and AUDIO R (red) sockets on the digi- tal receiver, and plug the other ends into the matching sockets on your television …