Supermicro X10SDV-TLN4F Operation & User’s Manual

84, 4-20 X10SDV-TLN4F/F Motherboard User’s Manual Data Bits Use this feature to set the data transmission size for Console Redirection. The options are 7 Bits and 8 Bits. Parity A parity bit can be sent along with regular data bits to detect data transmission errors. Select Even …

53, Chapter 2: Installation 2-31 USB Wake-Up Use the JPUSB1 jumper to enable the function of "System Waking-Up via USB devices" for USB0/1. This jumper allows you to "wake-up" the system by pressing a key on the USB keyboard or by click- ing the USB mouse of your…

28, 2-6 X10SDV-TLN4F/F Motherboard User’s Manual Installing the Motherboard 1. Install the I/O shield into the back of the chassis. 2. Locate the mounting holes on the motherboard. (See the previous page.) 3. Locate the matching mounting holes on the chassis. Align the mounting holes on…

106, C-2 X10SDV-TLN4F/F Motherboard User’s Manual 5. When the screen as shown above displays, using the arrow key, select the item- "Proceed with ash update" and press the <Enter> key. You will see the progress of BIOS Recovery as shown in the screen below. Note: Do not in…

61, Supermicro X10SDV-TLN4F 3-3 Chapter 3: Troubleshooting 3-2 Technical Support Procedures Before contacting Technical Support, please make sure that you have followed all the steps listed below. Also, Note that as a motherboard manufacturer, Supermicro does not sell directly to end users, so it is best to �…

110, D-2 X10SDV-TLN4F/F Motherboard User’s Manual D-2 Steps to Reboot the System by Using Jumper JBR1 1. Power down the system. 2. Close pins 2-3 on Jumper JBR1, and power on the system. 3. Follow the BIOS recovery SOP listed in the previous chapter (Appendix C). 4. After completing…