A&D FS-D Manual, Setup Instructions

11, A&D FS-D 9 No. NAMES FUNCTIONS / OPERATION COMPARISON INDICATORS Indicates the results of the weight comparison LO (RED), OK (GREEN) and HI (YELLOW). STABLE ANNUNCIATOR Turns ON when the weight reading is STABLE. ZERO ANNUNCIATOR Turns ON when the weight is in the center of ZERO…

2, This Manual and Marks All safety messages are identified by the following, “WARNING” or “CAUTION”, of ANSI Z535.4 (American National Standard Institute: Product Safety Signs and Labels). The meanings are as follows: WARNING A potentially hazardous situation which, if not av…

6, 4 3. UNPACKING Unpack the indicator carefully and keep the packing material if you are likely to transport the indicator again in the future. When unpacking, check whether all of the following items are included: …

14, 12 7. CALIBRATION This function adjusts the scale (indicator) for accurate weighing. Calibration must be done when the FS-D is initially connected to a load cell (base unit). Calibration may also be required according the changes in the environment.  When the scale (indicator) …

13, 11 6-2. Function list Item Function number Description  C01- 0 CAL switch enabled, 0 key enabled C01- 1 CAL switch disabled, 0 key disabled Calibration C01- 2 CAL switch enabled, 0 key disabled Do not set “C01-1”  C02- 0 6 kg (1…