Mitsubishi Heavy Industries SRK63ZR-S Operation & User’s Manual

27, – 26 – Turn off the power source. Remove the air fi lter Before maintenance During the operational season Maintenance Cleaning the air fi lter Do not use the following articles: • Hot water (40°C or more) It may deform or discolour the unit. • Petrol, paint thinner, benzine or …

15, – 14 – COOL/HEAT/DRY/FAN mode operation Airfl ow direction adjustment procedure. Page 15 Press the MODE button. Set to a required mode. (Cool), (Heat), (Dry), (Fan) Press the ON/OFF button. Press the TEMP button. Press or button for the preferred temperature. Rec…

26, – 25 – SELF CLEAN operation ■ CLEAN operation should be run after AUTO, COOL and DRY operation to remove the moisture from inside the indoor unit and control the growth of mold and bacteria. 1 In order to active CLEAN operation, press the CLEAN switch with the tip of a ballpoin…

31, – 30 – Contact your dealer ■ Turn off the power switch immediately and inform your dealer in any of the following situations: The cable becomes extremely hot. The covering of the cable is cracked. When abnormalities occur, turn off the power source immediately and turn it on after…

32, – 31 – Self diagnosis function ■ We are constantly trying to do better service to our customers by installing such judges that show abnormality of each function as follows RUN light TIMER light TIMER light ON 1-time fl ash 2-time fl ash 3-time fl ash 5-time fl ash 6-time fl ash 7-…

16, Mitsubishi Heavy Industries SRK63ZR-S – 15 – Airfl ow direction adjustment ■ Up/down direction can be adjusted with the AIRFLOW U/D (UP/DOWN) button on the remote control. Every time you press this button the mode changes as follows: Change on AIRFLOW (UP/DOWN) mode. ■ Left/right direction can be adjusted …