MS -400C series Operation & User’s Manual

6, Remoter R1 Brightness adjust VR For adjusting the brightness of remote indicator R2-1 WET Battery Indicator Light on when battery type selector set on WET position R2-2 GEL Battery Indicator Light on when battery type selector set on GEL position R2-3 AGM/CAL Battery Indicator L…

9, CAUTION 1. Safety instructions are required to be observed at all times. 2. Do not allow water to drip or splash on the charger. 3. Working temperature should between 0˚C and 40˚C 4. Allow at least 10cm of clearance around the charger for airflow. 5. Do not use the char…

8, SLEEP MODE Select the SLEEP/NORMAL switch to SLEEP, the charging current will be reduced to 50% of the normal charging current, the fan speed and noise will also be reduced. REMOTE CONTROL Plug the remote cable to the REMOTE jack, and connect the other end of the remote cable to th…

5, PANEL DESCRIPTION Item Name Descriptions 1 AC Selector Select AC input voltage to be 115V (100V~120VAC) or 230V (220~240VAC) Factory Default 240V 2 Battery Type Selector WET Flooded battery GEL Gel battery AGM/CAL AGM or CAL battery 2-1 WET Battery…

2, MS -400C series General Information MSE’s smart multi-stage battery charger is an ideal choice for charging lead-acid wet batteries, maintenance free GEL-type batteries and AGM/CAL batteries. This smart portable battery charger converts AC power to charge 12V batteries. An AC input…