Pegasus PDCHRDN-700AI Operation & User’s Manual

15, 13 OSD SETTINGS BURST OFF DELAY CNT 100 DAY->NIGHT 100 NIGHT->DAY 100 • COLOR: Force the camera to stay in DAY (COLOR) mode at all times. • B/W: Force the camera to stay in B/W (NIGHT) mode at all times. The B/W submenu allows you to set BURST to be ON or OFF. 3.10 NR NR allows y…

3, 1 Important Safety Information FCC Compliance Statement The equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to provide reasonable protection against harmful interference when the eq…

5, 3 INTRODUCTION 1. Introduction The dome camera is ideal for indoor installation in commercial and residential environment. With 3-axis mount support, it provides exible installation on a ceiling or wall even at an angle. 1.1 Before You Begin Please read this manual carefull…

8, 6 INSTALLATION 2.2 Connecting the wiring Refer to Figure 1-1 to connect the video connect output connector (#b) and 24 VAC/12 VDC power connector (#a). Caution: For DC power supply use, make sure the polarity is correct to avoid malfunction and / or camera damage. 2.3 Mounting the Camera 1. Atta…

11, Pegasus PDCHRDN-700AI 9 2.7 Completing the Installation Once all adjustments are done, attach and secure the camera housing: 1. Use a soft, lint-free cloth to wipe the dome cover clean and remove ngerprints. 2. Attach the inner liner(#3) to the tilt adjustment bracket (#2). Push down unitl it clicks…

12, 10 OSD SETTINGS 3. OSD Settings Use the OSD menu to set up the camera for optimum performance. LENS AUTO SHUTTER/AGC AUTO WHITE BAL ATW BACKLIGHT OFF PICT ADJUST ATR OFF MOTION DET OFF NEXT EXIT SAVE ALL PRIVACY OFF DAY/NIGHT AUTO NR CAMERA ID OFF SYNC INT L…