Rustibus 25 AIR Operation Manual

16, PARTS  RUSTIBUS® 25 AIR *To locate the part on the schematic, please take the last 2 digit of the part#. 025-0008 R25 O-Ring (3,5 *1,4) 025-0009 R25 Air inlet 025-0012 R25 Cone muer 025-0013 R25 Protecting rubber 025-0014 R25 Housing 025-0015 R25 Spring pin …

7, SAFETY PRECAUTIONS TO FOLLOW • Always install, operate, inspect and maintain this product in accordance with all applicable standards and regulations (local, state, country, federal, etc.). • Compressed air models always use clean, dry air at 90 psi (6.2 bar/620 kPa) maximum a…

8, Rustibus 25 AIR SAFETY PRECAUTIONS TO FOLLOW • Always wear protection when operating or performing maintenance on this tool. • Always wear hearing protection when operating this tool. • Always use Personal Protective Equipment appropriate to the tool used and material worked. This may inclu…

11, OPERATING THE RUSTIBUS® 25 The Rustibus® 25 is easy to operate and leaves the surface clean to St 3 +++. This tool is used for the removal of rust, corrosion, mill scale, protective coatings, body ller, adhesive labels, etc. 1. ALWAYS use suitable sealing material to fasten the conn…

3, INTRODUCTION This operation and maintenance manual is furnished with each Rustibus® 25 Miniblaster unit. It outlines general equipment use and the operation and maintenance requirements for ecient and safe operation. READ ALL INSTRUCTIONS AND DATA IN THIS OPERATION AND MAINTENANCE MANUAL P…

15, MAIN CONSUMABLES  RUSTIBUS® 25 AIR 025-0400 R25 11 mm HUB assembly 025-0401 R25 23 mm HUB assembly 025-0405 R25 Replaceable eraser 025-0406 R25 Eraser wheel assembly 025-0410 R25 Coating removal wheel assembly 025-0413 R25 11 mm steel bent belt, coarse 025-0414 R25 …