Optex AX-100TFR Series Installation Instructions Manual

12, -12- OPTEX INCORPORATED (USA) TEL: +1-909-993-5770 Tech: (800)966-7839 URL: http://www.optexamerica.com OPTEX KOREA CO., LTD. (KOREA) TEL: +82-2-719-5971 URL: http://www.optexkorea.com OPTEX SECURITY Sp.z o.o. (POLAND) TEL: +48-22-598-06-55 URL: http://www.optex.com.pl OPTEX (DONGGUAN) CO., L…

9, -9- 5° 5° 90° 90° Horizontal alignment angle Vertical alignment angle Caution 1 2 3 4 5 See “4-2” and set the 4 channel beam frequency selector. While looking through the view finder, adjust the horizontal and vertical angles so that the pairing detector is at the center of th…

6, -6- Caution Tamper bushing (option: MP-4) After completing the settings and operation check, insert the tamper bushing into each transmitter/receiver. 8 • The switch selection is not recognized with the tamper bushing inserted. Remove the tamper bushing before selecting a function using…

8, -8- 1, 2: Beam interruption adjustment switch 3: Battery saving timer switch 4: Intermittent output function switch 5: N.C./N.O. selection switch 1: Battery saving timer switch 2: Intermittent output function switch 3: N.C./N.O. selection switch Monitor jack (Receiver only) Recei…

3, Optex AX-100TFR Series -3- 1 2 3 Remove the chassis from the back box. Fix the chassis to the wall. Connect the cables from the back box to the wireless transmitters. Wall mounting screws (M4×20, supplied) Receiver-Wireless Transmitter Connection Yellow/Yellow-white cable: For alarm Green/Green-white cab…

1, -1- Warning Caution Warning Caution N219 1 2 3 4 5 6 INSTALLATION INSTRUCTIONS No.59-1552-1 090403 BATTERY OPERATED PHOTOELECTRIC DETECTOR AX-100TFR/AX-200 TFR BATTERY OPERATED PHOTOELECTRIC DETECTOR AX-100TFR/AX-200 TFR •AX-100TFR : Detection range: 30 m (100 ft.) •AX-200TFR : Detection …