Abit KV-82 Operation & User’s Manual

20, 2-12 Chapter 2 (12). Floppy and IDE Disk Drive Connectors The FDC1 connector connects up to two floppy drives with a 34-wire, 2-connector floppy cable. Connect the single end at the longer length of ribbon cable to the FDC1 on the board, the two connectors on the other end to the flop…

34, Abit KV-82 3-12 Chapter 3 USB Emulation: This option selects the USB devices to be supported in DOS environment.  USB Keyboard Support Via: This item allows you to select [BIOS] for using USB keyboard in DOS environment, or [OS] in OS environment.  USB Mouse Support Via: This it…

16, 2-8 Chapter 2 (5). Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive…

1, KV-80/KV-81/KV-82 AMD Athlon  64 System Board Socket 754 User’s Manual 4200-0426-01 Rev. 1.00 …

37, BIOS Setup 3-15 [Mouse Left]: Double click the mouse left button to power on the system. [Mouse Right]: Double click the mouse right button to power on the system. [Any KEY]: Use any keyboard keys to power on the system. [Button Only]: Use only the power button to power on the system. […

29, BIOS Setup 3-7 NOTE: Set this option to [No] setting if there are adapters that cannot be automatically detected by the system and will cause malfunction. 3-4. Advanced Chipset Features  AGP & P2P Bridge Control: Click <Enter> key to enter its submenu: AGP …