QNO QMS1024G Operation & User’s Manual

61, Gigabit Switch 61  Yes: Force to true state. Migrate Force to try to use the new MST/RST BPDUs, and hence to test the hypothesis that all legacy systems that do not understand the new BPDU formats have been removed from the LAN segment on the port(s). Apply Cli…

77, Gigabit Switch 77 The following table describes the labels in this screen. LABEL DESCRIPTION QoS Mode Select the QoS operation mode.  Disable: Disable QoS  Basic: Set QoS to basic mode Apply Click Apply to save your changes to the sw…

108, Gigabit Switch 108 Upgrade with TFTP Page Upgrade with HTTP Page The following table describes the labels in this screen. LABEL DESCRIPTION Upgrade Method Select upgrade method:  TFTP: Use TFTP to upgrade.  HTTP: Use HTTP to upgrade. Server IP IP…

49, QNO QMS1024G Gigabit Switch 49 The following table describes the labels in this screen. LABEL DESCRIPTION Port Select one or multiple ports to configure State Port EEE function.  Enabled: Enable EEE function  Disabled: Disable EEE function Apply …

63, Gigabit Switch 63 The following table describes the labels in this screen. LABEL DESCRIPTION Port Select Select the port list to specify which ports should apply this setting. Priority Set the Port Priority to the selected ports in the CIST instance. Apply Click…

24, Gigabit Switch 24 The following table describes the labels in this screen. LABEL DESCRIPTION Insertions The number of times the complete set of information advertised by a particular MAC Service Access Point (MSAP) has been inserted into tables associa…