Quality Craft M870P-28ADC Instruction Manual

5, 5 ASSEMBLY INSTRUCTIONS PARTS LIST: Fireplace insert 1 A) Top panel 1 B) Base panel 1 C) Front upper panel 1 D) Left front upper panel 1 E) Right front upper panel 1 F) Left front lower panel 1 G) Right front lower panel 1 H) Left upper side panel 1 J) Right uppe…

1, ELECTRIC FIREPLACE HEATER INSTRUCTION MANUAL M870P-28ADC NDF-65NB-1 ATTENTION: 1. Find a location for the fireplace heater that is protected from direct sunlight. 2. Do not plug the unit into the power outlet before you read all instructions. …

7, Quality Craft M870P-28ADC 7 Step 5: Attach the FRONT UPPER PANEL (C ) to the LEFT AND RIGHT FRONT UPPER PANEL (D and E) with 2 KD SCREWS (1 screw on each side). See Fig. E. fig. E Step 6: Attach 2 PLASTIC CONNECTORS on the upper side of FRONT UPPER PANEL (C) with 4 KD SCREWS (2 at each plastic con- nector). See Fig…

10, 10 TOUCH UP REPAIR PAINT Paint directly on the mantel unit if necessary. Fig. A. fig. A REPAIRS If any problems are found with the original parts during mantel assembly such as the panels cannot be installed with the plastic connector. Try to solve by one of the fol- lowing…

4, 4 at C is available for connecting three-blade grounding-type plugs to two-slot recep- tacles. The green grounding plug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot gr…

12, 12 fig. G fig. H 3. Attach the SMALL L-BRACKET and lock in place with SCREWS as shown in Fig. H. CLEANING To clean unit first turn off controls on unit and unplug the unit from power source. To clean glass display panel; remove dust with clean dry cloth or to remove fin…