Abocom ARM904 Quick Install Manual

7, Page 6 For Windows XP 1. Select Start Menu - Control Panel - Network and Internet Connections. 2. Select Set up or change your Internet Connection. 3. Select the Connection tab, and click the Setup button. 4. Cancel the pop-up "Location Information" screen. 5. …

3, Page 2 4. Connect the supplied Power Adapter and power on. 5. Check the LEDs • The Power, Internet, and WLAN LEDs should be ON. • For each active LAN (PC) connection, the LAN LED should be ON. o Configuration The Wireless Router can "Plug and Play" if your DSL/Cable …

2, Abocom ARM904 Requirements • DSL or Cable modem for broadband Internet access. • Standard Network cables. • TCP/IP network protocol installed on each PC. • Wireless Access Point requires Wireless devices compliant with the IEEE 802.11g specifications. Setup n Physical Insta…

10, Page 9 Wireless Access Point Setup In order to use the Access Point, other Wireless devices must use the same SSID and WEP settings as the Wireless Router. The Wireless Router's default settings are as follows. Setting Wireless Router SSID Default value: Untitled This …

9, Page 8 Linux Setup using X Windows n Internet Access Follow this procedure to set your system to act as a DHCP client, obtaining an IP Address and related data from the Wireless Router's DHCP Server. 1. Start your X Windows client. 2. Select Control Panel - Network …