RDM EC6000i Gen2 Installation Manual

12, 10 II. Insert the Franking Acknowledgement Printer Cartridge into the Printer Assembly: 1. Insert the Franking Acknowledgment Printer Cartridge straight into the printer assembly. 2. Apply pressure to the widest part of the flat top until the cartridge clicks into place…

21, 19 Check Feeder Does Not Function Properly Ensure that you are inserting the check properly: flush to the right side of the EC6000i Gen2 or the EC7000i, information side facing up, with the MICR line to the inside right. If the problem persists, contact your distributor. Remove any debri…

27, 25 WARRANTY SPECIFICS: This warranty only covers failures due to defects in materials or workmanship, which occur during normal use. It does not cover the following: - Damage, which occurs in shipment, - Failures which are caused by products not supplied by RD…

18, RDM EC6000i Gen2 16 Maintaining the EC6000i Gen2 or EC7000i The EC6000i Gen2 or EC7000i performs best when all working surfaces are clean and free of foreign material. Cleaning the Scanner § To clean the outside cabinetry: Use a damp cloth and mild soap. § To clean the inside of the unit: To…

8, 6 C. Inspect the Unit’s Features The EC6000i Gen2 and the EC7000i are provided in two models. Model A below has an integrated Magnetic Stripe Reader (MSR). Model B below does not include an MSR. Scanner Model A will be graphically represented throughout this manual for consistency…

16, 14 Understanding Status Signals The EC6000i Gen2 or EC7000i comes equipped with default light and sound signals described below. Default Light Signals: The unit’s status is shown through a single, multi-state LED (light emitting diode)—the light on the top, front, right-hand side…